HP 85106D Millimeter-Wave Network Analyzer, 33 GHz to 110 GHz

The HP 85104A series test set modules are required to complete the system. With these configurations, both forward and reverse measurements can be made with a single connection to the device under test. The greatest convenience and highest accuracy is assured through the TRL (through-reflect-line) calibration technique. Precision calibration kits and verification kits are also available for these waveguide bands.

The HP 85106D can be configured as a combination microwave/millimeter-wave S-parameter system with Option 001. This option adds an HP 8517B microwave test set, 50 GHz source (HP 83651B), HP 85133F test port return cable set, HP 85056A calibration kit, and appropriate cabling for convenient switching between millimeter-wave operation and microwave operation with no re-connections required.

• 33 MHz to 110 GHz frequency range

• Real-time error-corrected measurements

• 0.001 dB, 0.01 degree, 0.01 ns measurement resolution

• Optional time domain and pulsed RF measurement capability

The following specifications describe the system performance for the HP 8510D network analyzer in the HP 85106D configuration for measurements from 33 to 100 GHz in four waveguide bands.  For complete specifications, refer to the HP 85106D system data sheet.

Frequency
Frequency Range:                 33 to 110 GHz
            
Dynamic Range (for transmission measurements)
                                              
Frequency Range (GHz)            33–50     40–60     50–75     75–110
Maximum Power 
measured at port 2:              +12 dBm   +10 dBm   +10 dBm   0 dBm 
Reference Power 
at port 1, nominal:              0 dBm     0 dBm     0 dBm     –3 dBm 
Minimum Power 
measured at port 2:              –87 dBm   –87 dBm   –75 dBm   –79 dBm 
Receiver Dynamic Range:          99 dB     97 dB     85 dB     79 dB 
System Dynamic Range:            87 dB     87 dB     75 dB     76 dB

HP 85106D     Millimeter-Wave Network Analyzer, 33 GHz to 110 GHz
   Opt 001    Add Microwave Test Set (HP 8517B)
   Opt 007    High Power/Dynamic Range Configuration
   Opt 010    Add Time Domain Capability to HP 8510C
   Opt 230    220V/240V Line Operation System for Rack

HP 8510 System Solutions, Brochure ( PDF)
HP 8510C Family Network Analyzer, Configuration Guide ( PDF)
HP 8510C Family Network Analyzer, Technical Data ( PDF)
HP 85106C Millimeter-Wave Network Analyzer System, Product Overview ( PDF)

If you do not have the Adobe Acrobat Reader necessary for viewing PDF documentation, download your free Acrobat Reader now.

Additional help is a click away!

Want to talk to a knowledgeable engineer about this product at our HP Test and Measurement Call Center? Do you have a question you want to send in by e-mail? A measurement set-up you need to fax in? Follow the link above and you will be given a choice to contact an engineer by telephone, e-mail or fax.

This service is available only in the United States. For assistance outside the U.S., contact your local HP DIRECT or HP Sales Office.

Related HP 8510C Network Analyzer Family, 45 MHz to 110 GHz product datasheets:

HP 85106D Millimeter-Wave Network Analyzer, 33 GHz to 110 GHz
HP 85107B Microwave Network Analyzer, 45 MHz to 50 GHz
HP 85108A Pulsed-RF Network Analyzer System, 2 GHz to 20 GHz
HP 85108L Pulsed-RF Network Analyzer System, 45 MHz to 2 GHz
HP 8510C Vector Network Analyzer
HP 8510E Microwave Network Analyzer, 45 MHz to 20 GHz
HP 8510SX Microwave Network Analyzer, 45 MHz to 26.5 GHz
HP 8510XF (E7340A) Single Connection, Single Sweep, Network Analyzer System, 45 MHz to 85 GHz
HP 8510XF (E7350A) Single Connection, Single Sweep, Network Analyzer System, 45 MHz to 110 GHz

Related product families available online:

HP 8510 Series

[Hewlett-Packard] [HP Test & Measurement] [Product Information] [Model Number Index]

Privacy Statement    Use of this site indicates that you accept the Terms of Use

Contact HP Test & Measurement. (c) Copyright 1994 - 1998 Hewlett-Packard Company.

Page Updated: Thursday February 18 08:01:13 UTC 1999