HP 85107B Microwave Network Analyzer, 45 MHz to 50 GHz

This preconfigured system is a complete solution for characterizing the linear behavior of either active or passive networks over the 45 MHz to 50 GHz frequency range. The HP 8510C displays measurement results in log/linear magnitude, phase, or group delay format on a large, color CRT with two independent, yet identical channels. The impact of systematic errors is removed by virtually "real-time" error correction, allowing you to adjust your test device while it's being measured.

• 45 MHz to 50 GHz frequency range

• Real-time error-corrected measurements

• 0.001 dB, 0.01 degree, 0.01 ns measurement resolution

• Optional time domain and pulsed RF measurement capability

Dynamic Range (for transmission measurements)

                             Frequency Range GHz
                   .045 to 0.84   0.84 to 20  20 to 40   40 to 50
Maximum power (dBm) measured at port 2	
   Option 005:          +17           +8         +3         -4
   Option 007:          +17           +12        +5         -5 
Reference power (dBm) at port 1 (nominal)
   Option 005:          +2            -7         -17        -29
   Option 007:          +5            +2         -5         -16 
Minimum power (dBm) measured at port 2	
   Option 005:          -75           -97        -91        -90
   Option 007:          -70           -92        -89        -91 
Receiver dynamic range (dB)
   Option 005:          92            105        94         86 
   Option 007:          87            104        94         86 
System dynamic range (dB)
   Option 005:          77            90         74         61 
   Option 007:          75            94         84         75 

Measurement port characteristics
(These specifications are for the HP 85107B Options 005 and 007)

                        Frequency Range GHz
                 .045 to 0.84    0.84 to 20   20 to 40    40 to 50
Residual (dB)

Directivity:          42            42           38          36 
Source Match:         41            38           33          31 
Load Match:           42            42           38          36 
Reflection 
 Tracking:            ±0.001        ±0.008       ±0.02       ±0.027 
Transmission 
 Tracking:            ±0.014        ±0.045       ±0.110      ±0.137 
Crosstalk:            99            110          91          80 

Raw (typical) (dB) (Before calibration/error correction)

Directivity:          20            20           20          20 
Source Match:         20            12           10          10 
Load Match:           20            12           10          10 

HP 85107B     Microwave Network Analyzer, 0.045 to 50 GHz
   Opt 001    add 3.5 mm measurement accessories (HP 85052B, and 85134F)
   Opt 005    add step attenuators and bias tees to HP 8517B
   Opt 007    add high power and high dynamic range configuration to the
	      HP 8517B testset
   Opt 010    add time domain capability to HP 8510C
   Opt 230    220V/240V line voltage operation

HP 8510XF Single-Connection, Single Sweep Systems, Product Overview ( PDF)
HP 8510C Family Network Analyzer, Technical Specifications ( PDF)

If you do not have the Adobe Acrobat Reader necessary for viewing PDF documentation, download your free Acrobat Reader now.

Additional help is a click away!

Want to talk to a knowledgeable engineer about this product at our HP Test and Measurement Call Center? Do you have a question you want to send in by e-mail? A measurement set-up you need to fax in? Follow the link above and you will be given a choice to contact an engineer by telephone, e-mail or fax.

This service is available only in the United States. For assistance outside the U.S., contact your local HP DIRECT or HP Sales Office.

Related HP 8510C Network Analyzer Family, 45 MHz to 110 GHz product datasheets:

HP 85106D Millimeter-Wave Network Analyzer, 33 GHz to 110 GHz
HP 85107B Microwave Network Analyzer, 45 MHz to 50 GHz
HP 85108A Pulsed-RF Network Analyzer System, 2 GHz to 20 GHz
HP 85108L Pulsed-RF Network Analyzer System, 45 MHz to 2 GHz
HP 8510C Vector Network Analyzer
HP 8510E Microwave Network Analyzer, 45 MHz to 20 GHz
HP 8510SX Microwave Network Analyzer, 45 MHz to 26.5 GHz
HP 8510XF (E7340A) Single Connection, Single Sweep, Network Analyzer System, 45 MHz to 85 GHz
HP 8510XF (E7350A) Single Connection, Single Sweep, Network Analyzer System, 45 MHz to 110 GHz

Related product families available online:

HP 8510 Series

[Hewlett-Packard] [HP Test & Measurement] [Product Information] [Model Number Index]

Privacy Statement    Use of this site indicates that you accept the Terms of Use

Contact HP Test & Measurement. (c) Copyright 1994 - 1998 Hewlett-Packard Company.

Page Updated: Thursday February 18 07:47:53 UTC 1999