HP 8510E Microwave Network Analyzer, 45 MHz to 20 GHz

This preconfigured system is a complete solution for characterizing the linear behavior of either active or passive networks over the 45 MHz to 20 GHz frequency range. The HP 8510C displays measurement results in log/linear magnitude, phase, or group delay format on a large, color CRT with two independent, yet identical channels. The impact of systematic errors is removed by virtually "real-time" error correction, allowing you to adjust your test device while it's being measured. Effective directivity and source match can be improved to as much as 60 dB with a TRL calibration kit that must be purchased separately.

• 45 MHz to 20 GHz frequency range

• Real-time error-corrected measurements

• 0.001 dB, 0.01 degree, 0.01 ns measurement resolution

• Optional time domain and pulsed RF measurement capability

Specifications shown are for the HP 8510E with Option 005, which 
replaces HP 85052D with HP 85052B calibration kit.

Dynamic Range (for transmission measurements)
				Frequency Range (GHz)
				.045-2		2-8		8-20		
Maximum power (dBm) 
 measured at port 2		+20 		+11 		+10 	

Reference power (dBm)
 at port 1 (nominal)		+2 		-2 		-6 	

Minimum power (dBm)
 measured at port 2		-66 		-95 		-95 	
Receiver 
 dynamic range (dB)		86 		106 		105 		
System 
 dynamic range (dB)		68 		93 		89 		

Measurement port characteristics
				Frequency Range GHz
				.045-2		2-8		8-20		
Residual (dB)

 Directivity			48 		44 		44 		
 Source Match			40 		33 		31 		
 Load Match			48 		44 		44 		
 Reflection Tracking		±0.003 		±0.003 		±0.006 		
 Transmission Tracking		±0.017 		±0.044 		±0.084 	
 Crosstalk			89 		115 		110 	

Raw (typical) (dB) (Before calibration/error correction)

 Directivity			23 		23 		14 		
 Source Match			17 		15 		11 		
 Load Match			17 		15 		11

HP 8510E	Microwave Network Analyzer
   Opt 002	add step attenuators and bias tees to the HP 8514B
   Opt 005	replace HP 85052D with HP 85052B calibration kit
   Opt 010	add time domain capability to HP 8510C
   Opt W31	add two years additional on-site service

HP 8510C Family Network Analyzer, Technical Specifications ( PDF)

If you do not have the Adobe Acrobat Reader necessary for viewing PDF documentation, download your free Acrobat Reader now.

Additional help is a click away!

Want to talk to a knowledgeable engineer about this product at our HP Test and Measurement Call Center? Do you have a question you want to send in by e-mail? A measurement set-up you need to fax in? Follow the link above and you will be given a choice to contact an engineer by telephone, e-mail or fax.

This service is available only in the United States. For assistance outside the U.S., contact your local HP DIRECT or HP Sales Office.

Related HP 8510C Network Analyzer Family, 45 MHz to 110 GHz product datasheets:

HP 85106D Millimeter-Wave Network Analyzer, 33 GHz to 110 GHz
HP 85107B Microwave Network Analyzer, 45 MHz to 50 GHz
HP 85108A Pulsed-RF Network Analyzer System, 2 GHz to 20 GHz
HP 85108L Pulsed-RF Network Analyzer System, 45 MHz to 2 GHz
HP 8510C Vector Network Analyzer
HP 8510E Microwave Network Analyzer, 45 MHz to 20 GHz
HP 8510SX Microwave Network Analyzer, 45 MHz to 26.5 GHz
HP 8510XF (E7340A) Single Connection, Single Sweep, Network Analyzer System, 45 MHz to 85 GHz
HP 8510XF (E7350A) Single Connection, Single Sweep, Network Analyzer System, 45 MHz to 110 GHz

Related product families available online:

HP 8510 Series

[Hewlett-Packard] [HP Test & Measurement] [Product Information] [Model Number Index]

Privacy Statement    Use of this site indicates that you accept the Terms of Use

Contact HP Test & Measurement. (c) Copyright 1994 - 1998 Hewlett-Packard Company.

Page Updated: Thursday February 18 07:55:51 UTC 1999