HP 8510SX Microwave Network Analyzer, 45 MHz to 26.5 GHz

The HP 8510SX microwave vector network analyzer is a complete system configured with an HP 8510C vector network analyzer, a 26.5 GHz S-parameter test set, a 26.5 GHz synthesized sweeper, and a complete set of 3.5 mm measurement accessories. The instruments are integrated in the system rack prior to shipment from the factory. Installation is included at no additional charge. This preconfigured system is a complete solution for characterizing the linear behavior of either active or passive networks over the 45 MHz to 26.5 GHz frequency range. The HP 8510C displays measurement results in log/linear magnitude, phase, or group delay format on a large, color CRT with two independent, yet identical channels. The impact of systematic errors is removed by virtually "real-time" error correction, allowing you to adjust your test device while it's being measured. Effective directivity and source match can be improved to as much as 60 dB with a TRL calibration kit that must be purchased separately.

[ Features ]

45 MHz to 26.5 GHz frequency range
Real-time error-corrected measurements
0.001 dB, 0.01 degree, 0.01 ns measurement resolution
Optional time domain and pulsed RF measurement capability

[ Specifications ]

Dynamic Range (for transmission measurements)
			
			Frequency Range GHz
				.045	2	8	20
				to 2	to 8	to 20	to 26.5
Maximum power (dBm)
 measured at port 2		+2 	+3 	+3 	-1 

Reference power (dBm)
 at port 1 (nominal)		-5 	-9 	-14 	-25 

Minimum power (dBm) 
 measured at port 2		-101 	-102 	-101 	-99 

Receiver (dB) 
 dynamic range			103 	105 	104 	100 

System  (dB)
 dynamic range			93 	90 	85 	74 

Measurement port characteristics
			
			Frequency Range (GHz)
				.045	2	8	20
				to 2	to 8	to 20	to 26.5
Residual (dB)

Directivity			48 	50 	50 	50 
Source Match			40 	50 	50 	50 
Load Match			48 	50 	50 	50 
Reflection Tracking		ą0.003	ą0 	ą0 	ą0 
Transmission 
 Tracking			ą0.009  ą0.004  ą0.009  ą0.01 
Crosstalk			117 	114 	108 	95 

Raw (typical) (dB) (Before calibration/error correction)

Directivity			24 	24 	28 	27 
Source Match			23 	23 	16 	14 
Load Match			23 	23 	16 	14

[ Ordering ]

HP 8510SX Microwave Network Analyzer, 45 MHz to 26.5 GHz Opt 001 7 mm accessories (HP 85050C and 85132F) Opt 010 Add time domain capability Opt 230 220V/240V line operation The system includes: HP 8510C Network Analyzer HP 8515A S-parameter Test Set HP 83631B Synthesizer HP 85052B Calibration Kit HP 11752D Gage Kit HP 85131F Cable Set HP 85043C Rack

[ Key Literature ]

HP 8510C Family Network Analyzer, Technical Specifications ( PDF)

If you do not have the Adobe Acrobat Reader necessary for viewing PDF documentation, download your free Acrobat Reader now.

[ Assistance ]

To help you make the right product choices

Local Sales Office

[ Related ]

Related HP 8510C Network Analyzer Family, 45 MHz to 110 GHz product datasheets:

HP 85106D Millimeter-Wave Network Analyzer, 33 GHz to 110 GHz

HP 85107B Microwave Network Analyzer, 45 MHz to 50 GHz

HP 85108A Pulsed-RF Network Analyzer System, 2 GHz to 20 GHz

HP 85108L Pulsed-RF Network Analyzer System, 45 MHz to 2 GHz

HP 8510C Vector Network Analyzer

HP 8510E Microwave Network Analyzer, 45 MHz to 20 GHz

HP 8510SX Microwave Network Analyzer, 45 MHz to 26.5 GHz

HP 8510XF (E7340A) Single Connection, Single Sweep, Network Analyzer System, 45 MHz to 85 GHz

HP 8510XF (E7350A) Single Connection, Single Sweep, Network Analyzer System, 45 MHz to 110 GHz

Related product families available online:

HP 8510 Series