HP 8510XF Single Connection, Single Sweep, Network Analyzer Systems, 45 MHz to 110 GHz

The HP 8510C system can easily be configured for making measurements at millimeter-wave frequencies. Hewlett-Packard offers two fully integrated systems for making millimeter measurements in coax, waveguide and on-wafer. The HP 8510XF is a family of single connection, single sweep, 45 MHz to 110 GHz network analyzer systems. These systems are designed for on-wafer and coaxial (1.0 mm) measurements. The HP 85106D offers hardware for configuring systems in the 33 to 50 GHz, 40 to 60 GHz, 50 to 75 GHz, and 75 to 110 GHz waveguide bands. These systems are fully integrated, tested, and verified at the factory prior to shipment. System installation at your facility and one year, on-site service are included at no additional cost.

The HP 8510XF systems have been designed to measure broadband devices to 110 GHz in coax (1.0 mm) or on-wafer, fully calibrated, in a single sweep. By building on the HP 8510C network analyzer, the HP 8510XF provides excellent measurement performance in frequency coverage, dynamic range and measurement accuracy.

Covering a broadband frequency range in millimeter-wave has been virtually impossible due to the frequency limitations of each waveguide band. The recent development from Hewlett-Packard of a broadband connector, coaxial calibration kit and directional couplers allows broadband devices to be measured over a wide frequency range, 45 MHz to 110 GHz, in one frequency sweep. All frequency band switching is performed internally by the HP 8510C, making it extremely convenient when measuring broadband devices on-wafer or in coax.

This product family includes

HP 8510XF (E7340A) Single Connection, Single Sweep, Network Analyzer System, 45 MHz to 85 GHz

HP 8510XF (E7350A) Single Connection, Single Sweep, Network Analyzer System, 45 MHz to 110 GHz

[ Features ]

New test heads designed to measure broadband devices to 110 GHz in coax (1.0 mm) or on-wafer
Full frequency calibrations supported on-wafer and using a new 1.0 mm coaxial calibration kit
Complete line of 1.0 mm accessories: calibration kit, verification kit, adapters and port cables

[ Specifications ]

Complete HP 8510XF Systems
Frequency Range
HP E7340A
   Standard:                  2 to 85 GHz
   With Opt 005:              45 MHz to 85 GHz                                   
HP E7350A
   Standard:                  2 to 110 GHz
   With Opt 005:              45 MHz to 85 GHz

[ Key Literature ]

HP 8510 System Solutions, Brochure ( PDF)
HP 8510XF Single-Connection, Single Sweep Systems, Product Overview ( PDF)
HP V/W281C,D mm-Wave-to Coax Adapters 50-110 GHz, Product Overview ( PDF)

If you do not have the Adobe Acrobat Reader necessary for viewing PDF documentation, download your free Acrobat Reader now.

[ Ordering ]

HP 8510XF Single Connection, Single Sweep, Network Analyzer Systems, 45 MHz to 110 GHz Complete HP 8510XF Systems HP E7340A Single Connection, Single Sweep Network Analyzer System, 2 to 85 GHz Opt 005 Extend low frequency to 45 MHz Opt 006 RF pass thru Opt 010 Add time domain capability to HP 8510C Opt 230 220/240 volt line operation HP E7350A Single Connection, Single Sweep Network Analyzer System, 2 to 110 GHÿÿÿÿz Opt 005 Extend low frequency to 45 MHz Opt 006 RF pass thru Opt 010 Add time domain capability to HP 8510C Opt 230 220/240 volt line operation

[ Assistance ]

To help you make the right product choices

Local Sales Office

Related product groups available online:

HP 8510 Series