HP 8563E Option K35 Adjacent Channel Power Ratio Test Set Optimized for W-CDMA

Use the HP 8563E option K35 with the HP 8560E Series of spectrum analyzers to increase the dynamic range of Adjacent Channel Power Measurements. Option K35 uses an alternate first converter mixer with custom filtering to increase the spectrum analyzer's ACPR measurement dynamic range to at least 70 dB for systems with a guard band between channels of 900 kHz or greater. This meets the needs of emerging W-CDMA specifications.

[ Features ]

Measure W-CDMA Adjacent Channel Power Ratio (ACPR) with a dynamic range of at least 70 dB.
Frequency conversion and filtering optimized for maximum dynamic range measurement of ACPR of systems with 900 kHz or greater guard band.
Device under test can range from 1.2 GHz to 3.0 GHz.
Easy to use. Control menus are integrated into HP 8560E Series soft keys.

[ Specifications ]

Refer to HP 8560E Series Spectrum Analyzer Techincal Specifications for base 
instrument specifications.  The following table provides performance 
characteristics of HP 8563E opt K35 test set.

Frequency Range:              1.2 GHz to 3.0 GHz

Maximum Input Power:          +5 dBm

Damage Input Power:           +30 dBm

Input Attenuator:             0 to 11 dB in 1 dB steps

Conversion Loss:              15 dB nominal (not relevant to ACP ratio measurement)

LO Input Frequency:           3.0 GHz to 6.8 GHz

LO Input Power Range:         +9 dBm to +20 dBm

Dynamic Range:                Measured in a 4.096 MHz integration BW

[ Ordering ]

HP 8563E Opt K35 Adjacent Channel Power Ratio Test Set Optimized for W-CDMA HP 8561E Spectrum Analyzer, 30 Hz to 6.5 GHz Opt E35 Firmware upgrade installed and K35 test set HP 8562E Spectrum Analyzer, 30 Hz to 13.2 GHz Opt E35 Firmware upgrade installed and K35 test set HP 8563E Spectrum Analyzer, 9 kHz to 26.5 GHz Opt E35 Firmware upgrade installed and K35 test set HP 8563E Spectrum Analyzer, 9 kHz to 26.5 GHz Opt K37 K35 test set with firmware ROM chips to upgrade existing HP 8560E Series spectrum analyzers HP 8564E Spectrum Analyzer, 9 kHz to 40 GHz Opt E35 Firmware upgrade installed and K35 test set HP 8565E Spectrum Analyzer, 9 kHz to 50 GHz Opt E35 Firmware upgrade installed and K35 test set In order for the HP 8563E opt K35 softkey menus to ne incorporated into an existing HP 8560E Series spectrum analyzer, the analyzer's firmware must be upgraded. This firmware upgrade is included with the option K37 package.

[ Key Literature ]