HP 8657A Option 022 0.3 GMSK Modulated Synthesized Signal Generator

Product Summary

The HP 8657A Option 022 signal generator provides 0.3 Gaussian Minimum Shift Keying (0.3 GMSK) modulation for testing receivers designed for the Global System for Mobile Communications (GSM) Pan-European Digital Cellular Radio System. This option contains the necessary premodulation filtering and signal-processing circuitry to generate precise 0.3 GMSK modulation over the entire 520 to 1040 MHz and 10 to 130 MHz frequency bands.

The HP 8657A Option 022 is also a versatile signal generator offering a variety of features, such as simultaneous and mixed modulation combinations of AM and FM, as well as a carrier phase adjust capability that allows you to characterize phase-sensitive devices. The low residual FM and excellent phase noise performance of this signal generator makes it ideal for many in-channel and even out-of-channel receiver tests. It offers a wide output range, +13 to -143.5 dBm with superior level accuracy of 1.0 dB. Built for reliability, this signal generator uses an all-electronic attenuator, which is backed with a five-year warranty to ensure that you will make consistent, repeatable measurements every time.

Product Features

• 0.3 GMSK Modulation

• Wide frequency coverage, 100 kHz to 1040 MHz

• Electronic attenuator

• <35 ms frequency switching speed

• AM and FM capabilities

• ±1 dB level accuracy (typically ±0.5 dB)

• Amplitude offset and phase adjustment capabilities

Product Specifications

Frequency Specifications

Range:					100 kHz to 1040 MHz
Resolution:				10 Hz
Timebase Aging Rate:			±2 ppm/year (typ)
    Option 001:				1.5 x 10e-6 parts/day after 10 
					days (typ.)
Switching Speed (w/i 100 Hz):		<35 ms (30 ms typ. at 25°C)


Spectral Purity Specifications

SSB Phase Noise
    (fc = 500MHz, 20 kHz offset):	<-130 dBc/Hz
Non-Harmonics (>5 kHz offset, CW):	<-60 dBc
Harmonics (at levels <=+7 dBm):		<-30 dBc
Subharmonics:				None
Residual FM (0.3 to 3 kHz, CW):		<4 Hz rms


Output Specifications
Range:				+13 to -143.5 dBm into 50 ohms,
				+10 dBm, 100 kHz to 1 MHz
Resolution:			0.1 dB
Absolute Accuracy:		< ±1 dB, >= -127 dBm
				< ±1.5 dB, >+7 dBm
Reverse Power Protection:	50 W


0.3 GMSK Digital Modulation Mode Specifications
Frequency Range
Date Normal:			520 to 1040 MHz
Date Inverted:			10 to 130 MHz
Harmonics (fc <1030 MHz):	<-30 dBc
Non-Harmonic Spurious (>150 kHz offset):
				<-50 dBc
Noise Floor:			<-100 dBc/Hz
Modulation Format:		0.3 GMSK
Pre-modulation Filter:		Gaussian LPF
Bandwidth x Data Rate (BT):	0.3
Data Rate:			270.833 kHz (±1 kHz)
Modulation Phase Error:		<3° rms (1° typ.)
(890-960 MHz, 10-130 MHz):	<8° peak (5° typ.)
Frequency Error (fc <1030 MHz):	10 Hz
Inputs:				Serial data and clock


Frequency Modulation Specifications

Maximum Peak Deviation:		99 kHz, fc < 130 and > 260
				50 kHz, fc 130 to 260 MHz
Resolution:			100 Hz, deviations < 10 kHz,
				1 kHz, deviations > 10 kHz
Bandwidth (1 dB):		dc to 50 kHz
Indicator Accuracy:		< ±5% of setting
Distortion (internal rates, >=3 kHz peak deviation):
				<0.5 % THD + noise


Amplitude Modulation Specifications

Depth (output at <=+7 dBm):	0 to 99%
				fc >= 400 kHz
Resolution:			1%
Bandwidth (1 dB):		20 Hz to 40 kHz
Accuracy (internal rates):	< ±(2% + 6% of setting)
	(<90% AM < + 7 dBm)
Distortion:			<1.5%
	(0 to 30% AM, internal rates, level < + 7 dBm)


General Specifications

Remote Programming Interface:	HP-IB (HP's implementation of IEEE-488)
IEEE-488 functions:		SH0, AH1, T0, L2, SR0, RL1, 
				PP0, DC1, DT0, C0, E1
Save/recall/sequence registers:	100 nonvolatile registers to save 
				front-panel settings
Operating temperature:		0°C to 55°C
0.3 GMSK Modulation:		+15°C to 35°C
Power requirements:		100 V, 120 V, 220 V, or 240 V (+5, -10%) from 
				48 to 440 Hz, 175 VA maximum
0.3 GMSK Modulation:		90 TO 264 V from 48 to 66 Hz; 75 VA maximum
Size:				133 mm H x 425 mm W x 520 mm D 
				(5.25 in x 16.75 in x 20.5 in)
0.3 GMSK Modulation:		44 mm H x 425 mm W x 422 mm D
				(1.75 in x 16.75 in x 17 in)
Weight: 			18.2 kg (40 lb)
0.3 GMSK Modulation:		4 kg (9 lb)

Product Ordering Information

HP 8657A	Opt 022 0.3 GMSK Modulated Synthesized Signal Generator
   Opt 001	High-Stability Timebase
   Opt 907	Front Handle Kit (HP 5061-9689)
   Opt 908	Rack Flange Kit (HP 5061-9677)
   Opt 910	Extra Operation/Calibration and Two Service Manuals
   Opt 915	Add Service Manual
   Opt +W30	3-year Repair Service
   Opt +W32	3-year Calibration Service

To help you make the right instrument choices

Your Field Sales Engineer is ready to answer your questions about specifications, applications and ordering. Find your Field Sales Engineer at your Local Sales Office.

[Hewlett-Packard] [Test & Measurement] [Product Information] [Model Number Index]

Contact HP Test & Measurement. (c) Copyright 1994, 1995, 1996, 1997 Hewlett-Packard Company.

Page Updated: Thursday June 19 16:21:56 UTC 1997