![]() | ||||
![]() |
HP 87075C Multiport Test Set, 75 Ohms![]()
|
Quickly and completely characterize your devices with a single connection. The HP test system eliminates time-consuming reconnections of a device to a two-port network analyzer to test all its signal paths. By saving time, you keep your costs down and your volumes up so you can remain competitive in the fast-growing cable-TV device-manufacturing industry.
HP also provides the HP 87075A/B custom multiport test sets through HP's special handling.
Frequency Specifications1
Frequency Range: 3 MHz to 1.3 GHz Noise Floor2: -84 dBm Receiver Dynamic Range: Instrument Dependent Measurement Dynamic Range3: 60 dB Connector Type: Type-N Female, 75 Ohm Maximum Test Port Power Measurement Level: +16 dBm Damage Level: +20 dBm Port-To-Port Isolation: 60 dB Port-To-Port Insertion Loss Reflection To Port N: 6 dB Port N To Transmission: 7 dB Multiport System Residuals Transmission Measurement Source Match Corrected: 30 dB Uncorrected: 14 dB Load Match: 16 dB Reflection Measurement Directivity: 40 dB Source Match Corrected: 30 dB Uncorrected: 14 dB Load Match: 20 dB Port Switching Time: 1 second Test Set Settling Time: 10 msec SelfCal Calibration Time4 Reflection: 2 seconds Transmission: 4 seconds Line Power Frequency: 47 to 60 Hz Voltage: 115V nominal (90 V to 132 V) or 230 V nominal (198 V to 264 V). A third-wire ground is required. Cabinet Dimensions: 132.8 mm H x 425 mm W x 495 mm D Weight Net: 7.7 kg Shipping: 11.3 kg
Environmental Characteristics
General Conditions ESD (electrostatic discharge) must be eliminated by use of static-safe work procedures and an antistatic bench mat. Operating Environment Indoor Use Only Operating Temperature: 0° to 55° C Maximum Relative Humidity: 80% for temperatures up to 31° C decreasing linearly to 50% relative humidity at 40° C. Altitude: up to 4,572 meters (15,000 ft) Non-Operating Storage Conditions Temperature: –40° C to +70° C Humidity: 0 to 90% relative at +65° C (noncondensing) Altitude: 0 to 15,240 meters (50,000 ft) 1This part provides several types of performance information: Specifications describe the test set’s warranted performance over a temperature range of 20°C to 30°C, unless otherwise stated. Supplemental Characteristics (indicated by italics) are typical, but nonguaranteed parameters, intended to provide useful information in using the product. The following conditions must be met for the test set to meet its specifications:
HP 87075C Multiport Test Set, 75 Ohms Opt 002 Two-port system Opt 006 Six-port system Opt 012 Twelve-port system Opt 1CM Rack-mount kit Opt UK6 Commercial calibration certificate with dataAll orders include the following:Cables 8120-2408 75 ohm Type-N to Type-N cable (M-M) 8120-2409 75 ohm Type-N to Type-N cable (M-F) 8120-8396 75 ohm Type-N to Type-F cable (M-M) 8120-8397 75 ohm Type-N to Type-F cable (M-F) Precision Adapters 85039-60010 Type-N (M) to Type-F (M) 85039-600111 Type-N (F) to Type-F (M) 85039-600131 Type-N (M) to Type-F (F) 85039-60014 Type-N (F) to Type-F (F) 85039-600021 Type-F (F) to Type-F (F) 85039-600061 Type-F (M) to Type-F (M) 85039-60012 Type-F (M) to Type-F (F) 1Included in HP 85039B Commercial Adapters 1250-2350 Type-F (F) to Type-F (F) 1250-2369 Type-N (M) to Type-F (M) 1250-2368 Type-N (F) to Type-F (M) Calibration Kits HP 85039B 75 ohm Type-F calibration kit Opt 00M Male standards only Opt 00F Female standards only HP 85036B 75 ohm Type-N calibration kit HP 85036E Economy 75-ohm Type-N calibration kit
HP 87075C includes a power cord, test-set calibration disk, 87075-60026,
87075-60028, 8120-6818, and 87075-90005 Option 1CM includes 87075-60027 and 87075-60029
HP 87075C Multiport Test Set, Product Overiew
HP 871XC, Configuration Guide
Custom Multiport Test Sets HP 87050A/B, Product Overview
If you do not have the Adobe Acrobat Reader necessary for viewing PDF documentation, download your free Acrobat Reader now. |
![]() |
Related product families available online:
Page Updated: Monday October 05 19:40:57 UTC 1998