|
| ||
|
|
HP 87104A Multiport Coaxial Switch, DC to 4 GHz, SP4T terminated | |
![[ Summary ]](../Graphics/tab-summary.gif)
![[ Features ]](../Graphics/tab-features.gif)
![[ Specifications ]](../Graphics/tab-specs.gif)
![[ Ordering ]](../Graphics/tab-ordering.gif)
![[ Assistance ]](../Graphics/tab-assistance.gif)
The HP 87104A multiport switch improves insertion loss repeatability and isolation, which is necessary for higher performance test systems. The repeatability and reliability of this switch is vital to ATS measurement accuracy and can cut the cost of ownership by reducing calibration cycles and increasing test system up time. The HP 87104A terminated multiport switch provides the long life and reliability required for automated test and measurement, signal monitoring, and routing applications. Highly repeatable switching capability is made possible through HP's rigorous design and tight manufacturing specifications. Low insertion loss repeatability reduces sources of random errors in the measurement path, which improves measurement accuracy.
General Operating Data
Maximum Power Rating: 1 watt average into 50 ohms internal loads Switching: 1W CW Non-Switching: 50W Pk (not to exceed 1 watt average) Life: 5,000,000 cycles minimum
Indicator Specifications
Maximum Withstand Voltage: 60V Maximum Current Capacity: 100 mA Maximum "ON" Resistance: 50 ohms Maximum "OFF" Resistance: 1 Gohms
Switch Drive Specifications
| Parameter Test | Conditions | Min | Nom | Max | Units |
|---|---|---|---|---|---|
| Supply Voltage, Vcc | |||||
| STD, Opt. T24 | 20 | 24 | 32 | V | |
| Supply Current, Icc | Switching: Pulse width >= 15 ms: Vcc = 24VDC1 |
||||
| Std, Opt. T24 | 2001 | mA | |||
| Supply Current (quiescent) | |||||
| STD, Opt. T24 | 25 | 50 | mA | ||
| Option T24 | |||||
| High Level Input | 3 | 7 | V | ||
| Low Level Input | 0.8 | V | |||
| Max High Input Current | VccMax Vinput=3.85VDC | 1 | 1.4 | mA |
1Closing one RF path requires 200 mA. Add 200 mA for each addtional RF path closed or opened. Using all RF paths open (selecting pin 16) requires 200 mA per RF path reset with Vcc=24 VDC.
Frequency Range: dc to 4 GHz SWR: 1.2 maximum Insertion Loss: 0.3 dB + 0.015 X frequency (GHz) Isolation: 100 dB maximum Repeatability: 0.03 dB maximum Connectors: SMA (f)
Environmental Specifications
Operating Temperature: -25 to 75°C Storage Temperature: -55 to 85°C Temperature Cycling: -55 to 85°C, 10 cycles per MIL- STD-202F, Method 107D, Condition A (modified) Vibration Operating: 7 g: 5 to 2000 Hz at 0.25 in p-p Survival: 20 g: 20 to 2000 Hz at 0.06 in p-p, 4 min/cycle, 4 cycles/axis Random: 2.41 g (rms) 10 min/axis Shock Half-Sine: 500 g at 0.5 ms, 3 drops/direction, 18 total Operating: 50 g at 6 ms, 6 directions Moisture Resistance: 65°C, 95% RH, 10 days per MIL-STD-202F Method 106E Altitude Storage: 50,000 feet (15,240 meters per MIL-STD- 202F, Method 105C, Condition B) RFI: Per MIL-STD-461C, RE02, Part 4 Magnetic Field: <5 gauss 1/4 inch from surface
Physical Specifications
Weight: 229 gm (0.50 lb)
HP 87104A Multiport Coaxial Switch, DC to 4 GHz, SP4T terminated Opt 100 Solder terminals Opt T24 24 VDC bias with TTL logic Opt UK6 Commercial certificate of calibration w/test data Opt UKS Certificate of calibrationHP 87104/87106A,B,C Multiport Coaxial Switches, Product OverviewHP 11713A Attenuator Switch Driver Accessory Cable: 5061-0969 HP 70611A Attenuator/Switch Driver1 HP 87130A Attenuator/Switch Driver1
1HP 87104 or HP 87106 in combination with HP 87130A or HP 70611A does not provide position sensing capability. Use HP 87204/87206 if position sensing is required.
| If you do not have the Adobe Acrobat Reader necessary for viewing this documentation, download your Free Acrobat Reader now. |
|
Accessory product datasheets available online:
To help you make the
right instrument choices
Page Updated: Thursday June 19 16:15:11 UTC 1997