HP 8714C Economy Network Analyzer, 300 kHz to 3 GHz (magnitude and phase measurements)

The HP 8714C RF economy network analyzer provides speed, accuracy and measurement versatility in a compact, integrated instrument for high-volume RF component manufacturing, inspection and maintenance. An integrated synthesized source and transmission/reflection test set enable complete swept frequency characterization of RF components with a single connection.

For testing narrowband devices, the internal synthesized source provides a fast (50 ms/sweep), stable (1 Hz resolution) stimulus. Calculate and display specified device characteristics in real time. Eight markers per channel, marker search, tracking, bandwidth and a variety of math functions speed component testing.

The instrument has a large, 9-inch instrument display, or use a VGA-compatible color monitor for enhanced visibility. Display formats include linear and log magnitude, group delay, phase, SWR, polar, Smith chart and real and imaginary. For 75-ohm measurements, dBV/dBmV/dBµV formats are also available.

• 300 kHz to 3 GHz

• Integrated transmission/reflection test set with narrowband and broadband detection

• "Real time" sweep speed (50 ms/sweep), synthesized 1 Hz resolution source, and 100 dB of system dynamic range

• Internal 3.5-inch disk drive (LIF/DOS formats) and VGA interface

• Internal HP Instrument BASIC (IBASIC) capability

• TCP/IP-compliant Ethertwist LAN interface option

• AM delay and fault location/SRL options

Source Characteristics
                    
Frequency Range
Min. frequency:                    300 kHz
Max. frequency:	                   3 GHz

Resolution:	                   1 Hz

Accuracy:	                   <5 ppm


Output Characteristics
Power Range (standard) 	
<1000 MHz:	                   -5 to 10 dBm
>1000 MHz:	                   -5 to 10 dBm

With Attenuator
<1000 MHz:	                   -60 to 7 dBm
>1000 MHz:	                   -60 to 7 dBm
With 75 ohms:	                   reduces output by 3 dB
With Group Delay:	           reduces output by 3 dB

Test Port Accuracy and Flatness
Standard:	                   ±1.0 dB
Opt 1EC:	                   ±1.5 dB
Opt 1E1:	                   ±2.0 dB
Opt 1EC and 1E1:	           ±3.0 dB


Signal Purity
Harmonics	                   (at +7 dBm)
<1 MHz:	                           <-30 dBc
>1 MHz:	                           <-30 dBc


Receiver Characteristics
Frequency Range	
Narrowband:                        300 kHz to 3 GHz
Broadband:	                   10 MHz to 3 GHz

Dynamic Range
Narrowband				
     <5 MHz	                   >80 dB
     >5 MHz	                   >100 dB
Broadband
     Internal:                     >60 dB
     External:                     >66 dB

Maximum Input
Narrowband
     (at 0.8 dBm compression):     10 dBm
Broadband
    (at 0.5 dBm compression):      16 dBm

Input Damage Level:	           20 dBm


AM Delay Characteristics
Apertures:                         55.56 kHz
Input Amplifier Range:             -10 to +13 dBm
Resolution:                        0.5 ns
Range:                             30 µs (9000 m)
Accuracy:                          ±4 ns


Test Set Characteristics
Reflection Port Match:             30 dB
Transmission Port Match:           18 dB typical
System Directivity:                40 dB


RF Connectors
Test Ports:                        All models are available with 50-ohm
                                   or 75-ohm, type-N connectors (f)


Physical Characteristics
Size:                              430 mm W x 180 mm H x 480 mm D
                                   (7 in x 17 in x 18.75 in)
Weight
Net:                               20.5 kg (45 lb)
Shipping:                          25 kg (55 lb)

HP 8714C     Economy Network Analyzer, 300 kHz to 3 GHz (magnitude and
             phase measurements)
   Opt 1EC   75-Ohm System Impedence
   Opt 1E1   60 dB Attenuator
   Opt 1C2   IBASIC Capability
   Opt 1DA   50-Ohm AM Delay
   Opt 1DB   75-Ohm AM Delay
   Opt 1CL   DIN Keyboard
   Opt 1CM   Rackmount
   Opt 100   Fault Location/SRL
   Opt 101   Transportable Operating Case and Fault Location/SRL
   Opt 1F7   LAN Interface


Calibration Kits
HP 85032E     50 Ohm Calibration Kit
HP 85036E     75 Ohm Calibration Kit

Upgrade Kits
HP 86221B     AM Delay Upgrade Hit, 50 ohm
HP 86223B     Attenuator Upgrade Kit
HP 86224C     IBASIC Upgrade Kit
HP 86225B     AM Delay Upgrade Kit, 75 Ohm
HP 86226C     Firmware Upgrade Kit
HP 86226T     TV Tuner Firmware Upgrade Kit
HP 86227C     LAN Upgrade Kit
HP 86228C     FL/SRL Upgrade Kit
HP C1405B     ABA/DIN Keyboard

Accessory Kits
HP 11853A     Type-N Accessory Kit
HP 11854A     BNC Accessory Kit
HP 11855A     Type-N Accessory Kit
HP 11856A     BNC Accessory Kit

Detectors and Bridges
HP 86200B     50 Ohm Scalar Detector
HP 86201B     75 Ohm Scalar Detector
HP 86205A     50 Ohm Bridge
HP 86207A     75 Ohm Bridge

Adapters and Cables
HP 86211A     Type-N to Type-F Adapter Kit
HP 8120-1839  BNC Test Port Cable, 50 ohm
HP 5063-0061  BNC Test Port Cable, 75 ohm
HP 8120-4781  Type-N Cable, 50 ohm
HP 8120-2408  Type-N Cable, 75 ohm
HP 8120-6737  Type-N 75 ohm Cable, 10 ft male/male
HP 86217A     Type-N 50 ohm Cable, male/male
   Opt 11     11 feet
   Opt 15     15 feet
   Opt 31     31 feet
HP 86217B     Type-N 50 ohm Cable, male/female
   Opt 11     11 feet
   Opt 15     15 feet
   Opt 30     30 feet
HP 86218A     Type-N 75 ohm Cable, male/male
   Opt 10     10 feet
   Opt 15     15 feet
   Opt 30     30 feet
HP 86218B     Type-N 75 ohm Cable, male/female
   Opt 10     10 feet
   Opt 15     15 feet
   Opt 30     30 feet
HP 1250-2713  Feed Thru, female/female
HP 9211-2656  Transit Case

HP 8711C/8712C/8713C/8714C RF Economy Network Analyzers Technical Specifications
HP 8711C/8712C/8713C/8714C RF Economy Network Analyzers Configuration Guide

If you do not have the Adobe Acrobat Reader necessary for viewing PDF documentation, download your free Acrobat Reader now.

Additional help is a click away!

Want to talk to a knowledgeable engineer about this product at our HP Test and Measurement Call Center? Do you have a question you want to send in by e-mail? A measurement set-up you need to fax in? Follow the link above and you will be given a choice to contact an engineer by telephone, e-mail or fax.

This service is available only in the United States. For assistance outside the U.S., contact your local HP DIRECT or HP Sales Office.

Related Information:

HP 8711C, 8712C, 8713C, 8714C Network Analyzer Firmware Upgrade, C.04.52 (1.4 MB)

Printer Compatibility Guide for Network and Spectrum Analyzers

Using a Network Analyzer to Characterize High-Power Components

VXIplug&play Universal Instrument Driver for the HP 8711C, 8712C, 8713C, 8714C Network Analyzers Revision A.01.00

Related HP 8711C RF Economy Network Analyzer Family product datasheets:

HP 85032E Economy Calibration Kit, Type-N, 50 Ohm
HP 85033D Calibration Kit, 3.5 mm
HP 86205A RF Bridge, 50 Ohm, 300 kHz to 6 GHz
HP 86207A RF Bridge, 75 Ohm, 300 kHz to 3 GHz
HP 8711C Economy Network Analyzer, 300 kHz to 1.3 GHz (magnitude measurements)
HP 8712C Economy Network Analyzer, 300 kHz to 1.3 GHz (magnitude and phase measurements)
HP 8713C Economy Network Analyzer, 300 kHz to 3 GHz (magnitude measurements)
HP 8714C Economy Network Analyzer, 300 kHz to 3 GHz (magnitude and phase measurements)

Related product families available online:

HP 8711 Economy Network Analyzer Family

[Hewlett-Packard] [Test & Measurement] [Product Information] [Model Number Index]

Privacy Statement    Use of this site indicates that you accept the Terms of Use

Contact HP Test & Measurement. (c) Copyright 1994 - 1998 Hewlett-Packard Company.

Page Updated: Thursday November 05 21:21:03 UTC 1998