HP 8751A Network Analyzer, 5Hz to 500MHz

Product Summary

The HP 8751A network analyzer is a high-throughput instrument with lab precision that covers 5Hz to 500MHz.

The HP 8751A provides resolution of 0.001Hz, 0.001dB, 0.001 degree, and 10ps for characterizing the linear behavior of either passive or active networks,devices, or components in the lab and the production test areas. The built-in 1.44MB disk drive is for direct save/recall of instrument state, calibration data, and application programs for your customization. Dedicated 50/75ohm S-parameter test sets, 50/75ohm T/R test kits, and the 1Mohm input adapters are all available.

Product Features

• 5Hz to 500MHz
• High Accuracy and Resolution:
  • +- 0.02dB, +- 0.12deg. dynamic accuracy
  • 0.001Hz, 0.001dB, 0.001 degree, 10ps resolution
  • Full 2-port and interpolative calibration
• High throughput tesing:
  • 10 updates of 201 sweep points per second
  • 0.4ms/point fast list sweep(IFBW = 4 kHz)
• Powerful Graphic Analysis Tools:
  • Conjugate matching analysis
  • Up to 4 traces simultaneous measurement/display
  • Eight active trace makers per channel
• Built-in 1.44MB disk drive for save/recall
• Crisp color display with RGB output
• HP Instrument BASIC for customization

Product Specifications

Frequency
Range:5Hz to 500MHz, Resolution:1mHz

Accuracy:+- 20ppm, +- 1.0ppm(Opt.001)

Stability:+- 2.5X10E-9/8hours(typical 23+- 5degC with Opt.001)


Output Characteritics
Power Range: -50 to + 15dBm, Resolution:0.1 dB

Flatness:+- 2.0dB @ 5Hz <= freq.<= 500MHz(23 +- 5deg., +0dBm, relative to 50MHz)

Level Accuracy:+-0.5dB(50MHz, 0dBm)

Level Linearity:+- 0.5dB @ output level >= -35dBM
                +- 1.5dB @ output level < -35dBM (50MHz, relative to 0 dBm)

Impedance: 50ohm

Receiver
Frequency Range:5Hz to 500MHz

Input Range: 0dBm @ ATT = 20dB
            -20dBm @ ATT = 0dB

IF Bandwidth:2Hz, 20Hz, 200Hz, 2kHz, 4kHz

Noise Level: - 130dBm @ IFBW = 20Hz, ATT=0 dB, frequency >= 100kHz 

Maximum Input Level: 0 dBm

Impedance: 50ohm

Crosstalk: < -100dB

Dynamic Accuracy: +- 0.02dB, +- 0.12deg.(input level - 10 to - 50dB, 20Hz IFBW)

Delay Characteristics:
Apeture Frequency: 0.5to 20%

Display Range:10ps to 500s

Accuracy:(Phase accuracy)/(360 X aperture)

Product Ordering Information

HP 8751A       Network Analyzer
   Opt 001     High-Stability Frequency Reference
   Opt 002     HP Instrument BASIC and 1MB RAM
   Opt 907     Front Handle Kit
   Opt 908     Rack Mount Kit
   Opt 909     Rack Flange and Handle Kit
   Opt 910     Extra Operating Manual
   Opt 915     Add Service Manual
   Opt W30     Extended Repair Service

HP 87511A      50ohm S-Parameter Test Set
   Opt 001     N-Type Port

HP 87511B      75ohm S-Parameter Test Set
   Opt 907     Front Handle Kit
   Opt 908     Rack Mount Kit
   Opt 909     Rack Flange and Handle Kit
   Opt 910     Extra Operating Manual

HP 87512A      50ohm Transmission/Reflection Test Kit
HP 87512B      75ohm Transmission/Reflection Test Kit
HP 41802A      1Mohm Input Adapter
HP 41800A      Active Probe

If you do not have the Adobe Acrobat Reader necessary for viewing this documentation, download your Free Acrobat Reader now.

Accessory product datasheets available online:

To help you make the right instrument choices

Your Field Sales Engineer is ready to answer your questions about specifications, applications and ordering. Find your Field Sales Engineer at your Local Sales Office.

[Hewlett-Packard] [Test & Measurement] [Product Information] [Model Number Index]

Contact HP Test & Measurement. (c) Copyright 1994, 1995, 1996, 1997 Hewlett-Packard Company.

Page Updated: Thursday June 19 16:11:49 UTC 1997