HP 8752C RF Network Analyzer

[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]
The HP 8752C network analyzer brings superior performance and useful productivity features to simplify and speed your device, component or network measurements in the 300 kHz to 6 GHz range. A swept synthesized source, transmission/reflection test set, and sensitive receiver are integrated into one compact instrument that is simple to set up and use. The analyzer is ideal for service, incoming inspection, production, and final test measurements.

The HP 8572C is a vector network analyzer that provides magnitude and phase information, offers up to 110 dB dynamic range, makes group delay and time domain measurements, and uses vector accuracy enhancement to minimize measurement uncertainty. The productivity features of the HP 8572C increase your throughput in production. The test sequence function allows you to make a measurement once from the front panel and automatically save the keystrokes without an external computer. Productivity is also enhanced by afast CPU clock rate, DOS format for disk output, and a non-volatile memory of 512 KB.


[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]


[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

Frequency Characteristics

Source Range: 300 kHz to 1.3 GHz (std.); 300 kHz to 3 GHz (Option 003); 300 kHz to 6 GHz (Option 006) Resolution: 1 Hz Accuracy: ±10 ppm at 25 °C ± 5 °C Output Characteristics Power Range: -20 to +5 dBm (std.), -85 to +10 dBm (Option 004), -85 to +8 dBm (Option 004 and 075) Resolution: 0.05 dB Level Accuracy: ±1 dB Level Linearity: (-20 to -15 dBm) ±0.5 dB relative to (-15 to 0 dBm) ±0.2 dB -5 dBm (0 to +5 dBm) ±0.5 dB output level

Receiver

Frequency Range: 300 kHz to 1.3 GHz (std.), 300 kHz to 3 GHz (Option 003), 300 kHz to 6 GHz (Option 006) Noise Level: typical Reflection: -75 dBm (3kHz IF BW), -85 dBm (10 Hz IF BW) Transmission: -90 dBm (3 kHz IF BW), -110 dBm (10 Hz IF BW)[300 kHz to 3 GHz] -85 dBm (3KHz IF BW), -105 dBm (10 Hz IF BW)[3-6 GHz] Damage Level: 20 dBm or 25 Vdc (Option 006: 20 dBm or 25 Vdc at reflection port, 20 dBm or 10 Vdc at transmission port.) Crosstalk: 100 dB, 300 kHz to 1.3 GHz; 100 dB (97 dB Option 075), 1.3 to 3 GHz; 90 dB, 3 to 6 GHz

Group Delay Characteristics

Range: 1/(2 x minimum aperture) Aperture: Frequency span/(no. of points - 1) up to 20% of frequency span Accuracy (in seconds): (phase accuracy (in degrees))/(360 x aperture in Hz) RF Connectors Test Ports: 50 ohm Type-N (female) 75 ohm Type-N (female) (Option 075)

Physical Characteristics

Size: 425 mm W x 178 mm H x 508 mm D (16.75 in x 7.0 in x 20.0 in) Weight: Net, 25 kg (56 lb); shipping, 28 kg (63 lb)

Declarations of Conformity


[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

HP 8752C RF Network Analyzer
   Opt 003   3 GHz frequency Extension
   Opt 004   Step Attenuator
   Opt 006   6 GHz Frequency Extension
   Opt 010   Time Domain Capability
   Opt 075   75 ohm Impedance
   Opt 802   Add Dual Disk Drive and HP-IB Cable
   Opt AFN   Add 50 ohm Test Port Cable
   Opt AFP   Add 75 ohm Test Port Cable

Upgrade Kits 08752-60003 Firmware Upgrade Kit for HP 8752A/B (ver. 1.03) 08752-60019 Option 004 Step Attenuator for HP 8752C 08752-60022 Firmware Upgrade Kit for HP 8752C (ver. 6.14) HP 11884D 6 GHz Upgrade Kit HP 11885A 3 GHz Frequency Upgrade Calibration Kits HP 85032B 50 ohm Type-N Calibration Kit Opt 001 Deletes 7mm to Type-N adapters HP 85033D 3.5 mm Calibration Kit HP 85036B 75 ohm Type-N Calibration Kit HP 85039A Type-F 75 ohm Calibration Kit HP 85060A 7-mm E-Cal Module HP 85062A 3.5-mm E-Cal Module HP 85064A Type-N E-Cal Module Fixtures HP 85024A High Frequency Probe HP 85070B High-Temperature Dielectric Probe HP 85071B Materials Measurement Software Other Accessories HP 11852B 50 ohm/75 ohm Minimum Loss Pad Opt 004 50 ohm Type-N (m) and 75 ohm Type-N (f) connectors HP 11853A 50 ohm Type-N Accesory Kit HP 11854A 50 ohm BNC Accesory Kit HP 11855A 75 ohm Type-N Accesory Kit HP 11856A 50 ohm BNC Accesory Kit HP 11878A 3.5 mm Adapter Kit HP 8120-4781 50 ohm Type-N Test Port Cable HP 8120-2408 75 ohm Type-N Test Port Cable HP 8120-2409 75 ohm Type-N (m-f) Test Port Cable HP 85019C Time Domain Upgrade


[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

HP 8752C and 8753D Network Analyzers Configuring Guide, Configuration Guide ( PDF)
HP 8752C RF Vector Network Analyzer, Product Overview ( PDF)

If you do not have the Adobe Acrobat Reader necessary for viewing PDF documentation, download your free Acrobat Reader now. Get Acrobat

[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]
Additional help is a click away!

Want to talk to a knowledgeable engineer about this product at our HP Test and Measurement Call Center? Do you have a question you want to send in by e-mail? A measurement set-up you need to fax in? Follow the link above and you will be given a choice to contact an engineer by telephone, e-mail or fax.

This service is available only in the United States. For assistance outside the U.S., contact your local HP DIRECT or HP Sales Office.

[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

Related Information:

Related product families available online:



Privacy Statement    Use of this site indicates that you accept the Terms of Use
Contact HP Test & Measurement. (c) Copyright 1994 - 1998 Hewlett-Packard Company.

Page Updated: Friday February 05 08:12:03 UTC 1999