HP 8900D Peak Power Meter

Product Summary

The HP 8900D power meter directly displays the peak power of RF pulses over a 100 MHz to 18 GHz frequency range. Measurements can be made on pulses with widths from 1 µs (100 ns in compare mode) to CW, and repetition rates from 100 Hz (0 Hz in compare mode) to 100 kHz. The HP 8900D has a high-resolution 3 and 1/2 digit digital display calibrated in watts. The direct reading display and range annunciator make the digital version a good choice for productions and field applications where unambiguous or frequent readings are required.

Product Features

• Frequency Range 100 MHz to 18 GHz

• Direct display of RF pulses

Product Specifications

General Specifications
Frequency Range:		100 MHz to 18 GHz
Dynamic Range (2 ranges of 10 and 100 mW full scale):			
				20 dB (0 to +20 dBm)
Pulse Response
  Direct Mode
	Pulse Width:		1 µs to CW
	Repetition Rate:	100 Hz to 100 kHz
  Compare Mode
	Pulse Width:		100 ns (typical) limited by rise-time
 				specification
	Repetition Rate: 	0 to 100 kHz
  Rise-Time:			75 ns
  Fall-Time:			125 ns (as measured on video output)
Power Consumtption:		100 and 120 Vac +5, -10%, 48 to 66 Hz 
				and 360 to 440 Hz; 220 and 240 Vac +5, 
				-10%, 48 to 66 Hz

Meter Accuracy
CW
	Direct:			±0.2 dB
	Compare:		±0.2 dB
Pulse
	Direct: 		±0.35 dB
	Compare:		±0.25 dB
Transfer Accuracy CW to Pulse
	Direct: 		±0.2 dB
	Compare:		±0.2 dB

Product Ordering Information

HP 8900D	Digital Peak Power Meter
   Opt W30	Extended Repair Service
   Opt W32	Calibration Service

To help you make the right instrument choices

Your Field Sales Engineer is ready to answer your questions about specifications, applications and ordering. Find your Field Sales Engineer at your Local Sales Office.

[Hewlett-Packard] [Test & Measurement] [Product Information] [Model Number Index]

Contact HP Test & Measurement. (c) Copyright 1994, 1995, 1996, 1997 Hewlett-Packard Company.

Page Updated: Thursday June 19 16:13:23 UTC 1997