HP 89410A Vector Signal Analyzer with W-CDMA Capability, DC to 10 MHz

[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]
The HP 89410A covers a frequency range of dc to 10 MHz and offers an optional second channel. The second channel makes it possible to measure frequency response or perform vector network analysis, and the built-in math functions facilitate measurement calibration and correction. Two-channel statistical measurements such as cross-correlation and coherence can also be made.

The HP 89410A provides a flexible source for circuit stimulation. Sinewaves, periodic chirps (sinewave sweeps), and pseudo-random noise are available, along with user-definable arbitrary waveforms. The arbitrary waveforms operate on a block of up to 4096 complex points. Any of these signals can be used as a stimulus while spectrum measurements are made elsewhere in the circuit. Source level and dc offset of the pattern are all controllable by the user.


[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]


[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

Frequency Specifications

Frequency Range: dc to 10 MHz Frequency Span Scalar Mode: 1.0 Hz to 10 MHz Vector Mode: 1.0 Hz to 10 MHz Frequency Resolution: 0.001 Hz Accuracy, Initial: ±10 ppm (±0.2 ppm optional) Resolution Bandwidth: 312.5 µHz to 3 MHz (1, 3, 10 sequence or arbitrary) Phase Noise Center Frequency at 10 MHz ------------------------------------------------ 100 Hz offset: -106 dBc/Hz 1 kHz offset: -110 dBc/Hz 10 kHz offset: -120 dBc/Hz 100 kHz offset: -120 dBc/Hz

Amplitude Specifications

Input Range 50 ohms: -30 dBm to +24 dBm 75 ohms: -31.7 dBm to +22.2 dBm 1 M ohms (referenced to 50 ohms): -30 dBm to +28 dBm Accuracy Absolute Full-Scale: ±0.5 dB Input Noise Density: -114 dBfs/Hz Sensitivity (lowest range, 50 ohms): -144 dBm/Hz Spurious Responses General Spurious: <= -.75 dBfs (>=1 MHz) Second Harmonic Distortion: < -75 dBc (-80 dBc typical) Intermodulation (third order relative to two tones at -6 dBfs): <= -75 dBc (-85 dBc typical) Residual Responses <1 MHz: < -75 dBfs >=1 MHz: -80 dBfs Analog Demodulation Maximum Bandwidth: 10 MHz (typical) Demodulation Accuracy AM: ±1% (typical) PM: ±3° (typical) FM: ±1% of span (typical) Trigger Scalar Mode: Free run, input channel, internal source, HP-IB, external Vector Mode: Free run, input channel, IF channel, internal source, HP-IB, external Input, Coupling: dc/ac Source Scalar Mode: Fixed sine, arbitrary Vector Mode: Arbitrary, fixed sine, random noise, periodic chirp Arbitrary Mode: Up to 4096-complex or 8192-real points Source Level (fixed sine): -110 dBm to +23.9 dBm

Measurement Characteristics

Two Channel Note: Requires second 10 MHz input channel (Option AY7) Channel Match (dc to 10 MHz): ±0.25 dB, +2.0° Real-Time Bandwidth Single-Channel Vector Mode Real-Time Bandwidth: 78.125 kHz Measurement Speed Vector Mode Maximum Display Update Rate: 60 traces/second Averaging Scalar Mode: rms (video), rms (video) exponential, peak hold Vector Mode: rms (video), rms (video) exponential, time, time exponential, peak hold Numbers of Averages: 1 to 99,999 Time-Gating Minimum Gate Length: <400 ns (dependent on span and RBW window selected) Time Capture Memory: 64 Ksample (1 Msample with Option AY9) Trace Math Operanda: Measurement data, data register, constant, other trace math functions, j(omega) Operations: +, -, x, +, cross correlation, conjugate, magnitude, phase, real, imaginary, square root, FFT, inverse FFT, natural logarithm, exponential Marker Functions: Peak signal track, frequency counter, bandpower

Vector Modulation Specifications (Option AYA)

Continuous or TDMA Formats: BPSK, QPSK, DQPSK, Pi/4 DQPSK, 8PSK, 16QAM, 32QAM, MSK, 2 and 4 level FSK Digital Video Format: 64-256QAM, 8-16VSB Data Block Lengths: Adjustable up to 4096 symbols (with Option UFG) User Selection of Filters: Raised cosine, root raised cosine, Gaussian, user-defined Adjustable Alpha (BT): 0.05 to 100 Trace and Table Formats: Constellation, vector diagram, eye diagrams, trellis diagrams, continuous I or Q vs. time, continuous error vector magnitude vs. time, modulation quality summary, detected symbol table Analysis Types: Error vector magnitude, phase error, magnitude error, amplitude droop, carrier frequency error, IQ offset, error vector spectrum, measured IQ spectrum

General Specifications

Environmental Calibration Interval: 1 year Warm-up Time: 30 minutes Temperature Operating: 0 to 55°C Not Operating: -20 to 65°C Power Requirements 115 Vac Operation: 90 to 140 V rms, 47 to 440 Hz 230 Vac Operation: 198 to 264 V rms, 47 to 63 Hz Maximum Power Dissipation: 750 VA Audible Noise (typical at 25°C): LpA<=50 dB Dimensions: Weight: 25 kg (55 lb) Size: 426 mm W x 230 mm H x 530 mm D (16.7 in x 9.1 in x 20.9 in)


[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

HP 89410A     Vector Signal Analyzer, DC to 10 MHz
   Opt AY5    Precision Frequency Reference
   Opt AY7    Second 10 MHz Input Channel
   Opt AY9    Extend Time Capture to 1 Msample
   Opt AYA    Vector Modulation Analysis
   Opt AYB    Waterfall and Spectrogram
   Opt AYH    Digital Video Modulation Analysis
   Opt AYJ    Add Adaptive Equalization to Modulation Analysis
   Opt UFG    4-MB Extended RAM and Additional I/O
   Opt UG7    Advanced LAN Support
   Opt IC2    HP Instrument BASIC
   Opt IFO    PC-Style Keyboard - U.S. Version (other options
              available for German, Spanish, French, U.K., Italian,
              and Swedish)
HP 89450A     DMCS Radio Test Personality
HP 89451A     Radio Test Personality
HP 89411A     21.4 MHz Downconverter
HP 89430A     1.8 GHz RF Section (converts HP 89410A to HP 89440A)
HP 89431A     2.65 GHz RF Section (converts HP 89410A/40A to HP 89441A)
HP 89400A     +24C User Training (scheduled)

Upgrade Kits
HP 89410U     HP 89410A Vector Signal Generator Optional Upgrade Kits
   Opt UE2    Firmware Upgrade to the Latest Version
HP 89400A     +24Y UserTraining (dedicated)


[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

HP 89400 Series Vector Signal Analyzers, Configuration Guide ( PDF)
HP 89410A dc to 10 MHz Vector Signal Analyzer , Technical Specifications ( PDF)
Downconverted Measurements Using the HP 89410A and HP 89441A, Product Note 89400-9 ( PDF)
HP's W-CDMA Code-Domain Power Measurement System, Product Overview ( PDF)

If you do not have the Adobe Acrobat Reader necessary for viewing PDF documentation, download your free Acrobat Reader now. Get Acrobat

[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

To help you make the right product choices

[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

Related Information:


Related HP 89400 Vector Signal Analyzer Family product datasheets:


Related HP E3830 Series Wide Bandwidth Signal Analysis Systems product datasheets:

Related product families available online:



Privacy Statement    Use of this site indicates that you accept the Terms of Use
Contact HP Test & Measurement. (c) Copyright 1994 - 1998 Hewlett-Packard Company.

Page Updated: Friday February 12 00:52:18 UTC 1999