|
| ||
|
|
HP 8970 Noise Figure Measurement Family | |
![[ Summary ]](../Graphics/tab-summary.gif)
![[ Features ]](../Graphics/tab-features.gif)
![[ Specifications ]](../Graphics/tab-specs.gif)
![[ Ordering ]](../Graphics/tab-ordering.gif)
![[ Assistance ]](../Graphics/tab-assistance.gif)
Noise figure measurements from 10 to 1600 MHz (2047 MHz optional)
are easy, accurate, and repeatable with the HP 8970B noise figure meter.
You save precious time, money, and resources, since the measurements are
done quickly and accurately. In addition, the wide dynamic range of the
HP 8970B allows simultaneous gain measurements up to 40 dB or loss
measurements to 20 dB, with no external attenuation or amplification.
The HP 8970S/V noise figure measurement systems remove the burden of
designing, building, and supporting a microwave noise figure measurement
system. You can now spend your time designing and building products,
not test systems. Each system consists of an HP 8970B noise figure
meter, HP 8971C noise figure test set, and a synthesized local
oscillator. The HP 8970V system, which operates from 10 MHz to 20 GHz,
uses the new HP 83711A synthesized CW generator as its local oscillator.
The HP 8970S, allows you to select a local oscillator from a recommended
list provided in the ordering section . The HP 8971C noise figure test
set brings the simplicity of double-sideband measurements and the
accuracy of single-sideband measurements together in one package.
Careful design and high-performance components, including a stable YIG
filter, allow broadband single-sided measurements from 10 MHz to 26.5
GHz with a single calibration sweep.
Related product datasheets available online:
Partial Specifications
(See HP 8970S technical data for complete specifications.) Frequency Range: HP 8970S: 10 MHz to 26.5 GHz HP 8970V: 10 MHz to 20 GHz Noise Figure Measurement Range: 0 to 30 dB Noise Figure Instrumentation Uncertainty (for a 14 to 16 dB ENR noise source in a 10° to 40°C environment and for device under test noise figure plus gain greater than 10 dB): 10 MHz to 18 GHz: ±0.2 dB (plus typical drift of ±0.015dB/°C) 18 to 26.5 GHz: +0.4 dB (plus typical drift of +0.08 dB/°C) Gain Instrumentation Uncertainty: 10 MHz to 18 GHz: +0.28 dB (plus typical drift of +0.05 dB/°C) 18 to 26.5 GHz: +0.07 dB/°C Noise Figure (maximum) 10 to 30 MHz: 18 dB 30 to 100 MHz: 13 dB 0.1 to 12 GHz: 10 dB 12 to 18 GHz: 11.5 dB 18 to 26.5 GHz: 14 dB Input SWR: 10 MHz to 18 GHz: 2.25 18 to 26.5 GHz: 2.7 Image and Odd Harmonic Rejection HP 8971C: 20 dB
HP 8970B Noise Figure Meter Opt 020 Extends upper frequency from 1600 to 2047 MHz Opt 700 External MATE translator Opt 907 Front panel handle kit Opt 908 Rack mounting flange kit Opt 909 Front panel handle kit plus rack mounting flange kit Opt 915 Service manual Opt 916 Extra operating manual Opt W30 Two additional years of return-to-HP service Opt W32 Calibration service HP 8971C Noise Figure Test Set Accessories Supplied: One LO to HP 8971C Cable, SMA (female), 300 mm One HP 8971C to HP 8970B Cable, N (male), 190 mm One N (male) to SMA (male) Adapter Two HP-IB Cables, 0.5 m Options: Opt 001 Add internal LO power amp Opt 002 Delete internal RF pre amp Opt 907 Front panel handle kit Opt 908 Rack mounting flange kit Opt 909 Front panel handle kit plus rack mounting flange kit Opt 915 Service manual Opt 916 Extra operating manual Opt W30 Two additional years of return-to HP service Opt W32 Calibration service Complete Noise Figure Measurement Systems HP 8970V Noise Figure Measurement System (0.01-20 GHz) HP 8970B Noise Figure Meter, HP 8971C Noise Figure Test Set (with options if desired) HP 83711A Synthesized CW Generator HP 8970S Noise Figure Measurement System HP 8970B Noise Figure Meter HP 8971C Noise Figure Test Set (with options if desired) Synthesized Microwave Signal Source (select one) Recommended Models HP 83711B Synthesized CW Generator (1 to 20 GHz) HP 83712B Synthesized CW Generator (10 MHz to 20 GHz) HP 8671B Synthesized CW Generator (2 to 18 GHz) HP 8673G Synthesized CW Generator (2 to 26.6 GHz) (Option 008 is not recommended) HP 83731B Synthesized Signal Generator (1 to 20 GHz) HP 83732B Synthesized Signal Generator (10 MHz to 20 GHz) HP 8672A Synthesized Signal Generator (2 to 18 GHz) HP 8673B Synthesized Signal Generator (2 to 26.5 GHz) (Option 008 is not recommended) HP 8673C Synthesized Signal Generator (10 MHz to 18 GHz) HP 8673E Synthesized Signal Generator (2 to 18 GHz) HP 83620A Synthesized Sweeper (10 MHz to 20 GHz) HP 83622A Synthesized Sweeper (2 to 20 GHz) HP 83630A Synthesized Sweeper (10 MHz to 26.5 GHz) HP 83640A Synthesized Sweeper (10 MHz to 40 GHz) HP 83650A Synthesized Sweeper (10 MHz to 50 GHz) HP 83751A Synthesized Sweeper (2 - 20 GHz) HP 83752A Synthesized Sweeper (0.01 - 20 GHz) Accessories HP 1494-0060 Rack Slide Kit for HP 8970B or 8971B HP 9211-2649 Transit case for the HP 8970B HP 9211-2648 Transit case for the HP 8971B
To help you make the
right instrument choices
Page Updated: Thursday June 19 16:09:42 UTC 1997