![]() | ||
![]() |
HP 909F Precision Coaxial Termination, DC to 6 GHz |
The HP 909F family of precision low reflection loads are intended for use as calibration standards.
Tantalum nitride on sapphire thin-film technology is used for exceptional long-term impedance stability. To ensure the best possible wear resistance characteristics, gold-plated beryllium copper has been used for the connector contacts.
Frequency
Frequency Range: dc to 6 GHz, usable to 18 GHz Impedance (nominal): 50 ohm Connector: HP 909F, APC-7 Option 012: type-N (m) Option 013: type-N (f) Reflection Coefficient (max) HP 909F dc to 5 GHz: 0.0025 (1.005 SWR) 5 to 6 GHz: 0.005 (1.01 SWR) 6 to 18 GHz: 0.07 (1.15 SWR) typical Option 012 dc to 2 GHz: 0.0035 (1.007 SWR) 2 to 3 GHz: 0.005 (1.01 SWR) 3 to 6 GHz: 0.01 (1.02 SWR) 6 to 18 GHz: 0.07 (1.15 SWR) typical Option 013 dc to 2 GHz: 0.0035 (1.007 SWR) 2 to 3 GHz: 0.005 (1.01 SWR) 3 to 6 GHz: 0.01 (1.02 SWR) 6 to 18 GHz: 0.07 (1.15 SWR) typical Power Rating: 500 mW avg.; 100 W peak, 10 mS/pulse
Weight
Net: 60g (2 oz) Shipping: 200 g (8 oz)
Environmental
Temperature Operating: +15° C to +35° C Non-Operating: –55° C to +75° C Altitude Operating: 15,000 ft Non-Operating: 50,000 ft Humidity: Cycling 5 days, +40°C @ 95% RH Vibration: 0.015", 5-55-5 Hz, 15 min., 3 axes Shock: 100 g, 1-2 ms, 3 times 3 planes EMC: Radiation interference is within the requirements of MIL-STD-461, method RE02, VDE 0871, CISPR Publication 11.
HP 909F Precision Coaxial Termination, dc to 6 GHz Connector Options (Standard connector is APC-7): Opt 012 Type-N (m) Opt 013 Type-N (f)HP 909F Precision Coaxial Termination, Technical Specifications
If you do not have the Adobe Acrobat Reader necessary for viewing this documentation, download your Free Acrobat Reader now. |
![]() |
Page Updated: Thursday June 19 16:18:28 UTC 1997