HP E1328A 4-Channel D/A Converter

[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]
The HP E1328A 4-Channel D/A Converter is a B - size, 1 - slot, register-based VXI module. It has four independent, isolated digital-to-analog channels configurable for either dc voltage or dc current output. Remote voltage sensing is available with no-fault operation.

All four channels are independently isolated and may be floated up to 350 Vdc from ground. Multiple channels may be connected in series or in parallel to increase the voltage or current range (to 48 V or 96 mA using a single module). The D/A converter can be calibrated through software commands. You can use this module in a system with a 5.5-digit multimeter (HP E1326B or equivalent) and multiplexer. Then, the system can be programmed to automatically calibrate the D/A outputs to 24-hour specifications each day. This product may be adapted for use in a C-size mainframe.

Refer to the Related Links Section below for instrument driver availability and downloading instructions, as well as for recent product updates, if applicable.


[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]


[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ] 

VXI Characteristics


VXI device type:        Register based
Data transfer bus:      A16, D16 DTB Slave
Size:                   B
Slots:                  1
Connectors:             P1
Shared memory:          n/a
VXI busses:             n/a
C-size compatibility:   Yes





Instrument Drivers


See the HP Website (http://www.hp.com/go/inst_drivers) for driver
availability and downloading.

Command module firmware:                 ROM
Command module firmware rev:             A.01
I-SCPI Windows® 3.1:                     Yes
I-SCPI Series 700:                       Yes
C-SCPI LynxOS:                           Yes
C-SCPI Series 700:                       Yes
HP Panel Drivers:                        Yes
VXIplug&play Windows Framework:          Yes
VXIplug&play Windows 95/NT® Framework:   Yes
VXIplug&play HP-UX Framework:            No





Module Current


           IPM    IDM
  +5 V:    0.4    0.02
 +12 V:    0.5    0.01
 –12 V:    0      0
 +24 V:    0      0
 –24 V:    0      0
–5.2 V:    0      0
  –2 V:    0      0





Cooling/Slot


Watts/slot:        6.50
DeltaP mm H2O:     0.11
Air Flow liter/s:  0.52


[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ] 

HP E1328A    4-Channel D/A Converter
   Opt  0B3  Service Manual
   Opt  ABJ  Japan - Japanese Localization
   Opt  W01  3 Year Return to HP to 1 Year OnSite Warranty

Trademarks:


[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

HP E1328A Technical Specifications Datasheet ( PDF)

If you do not have the Adobe Acrobat Reader necessary for viewing PDF documentation, download your free Acrobat Reader now. Get Acrobat

[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

To help you make the right product choices

[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

Related Information:


Related VXI Analog Sources product datasheets:



Privacy Statement    Use of this site indicates that you accept the Terms of Use
Contact HP Test & Measurement. (c) Copyright 1994 - 1998 Hewlett-Packard Company.

Page Updated: Thursday February 18 05:18:05 UTC 1999