HPE1339A 72-Channel Digital Output/Relay Driver


[ Summary ][ Features ][ Specifications ][ Ordering ][ Assistance ]

Product Summary

The HP E1339A 72-channel digital output/relay driver is a B-size, 1-slot, register-based VXI module. Channels can be used (with external pull-up resistors) as digital outputs or as drivers for external relays. All channels are referenced to chassis ground, can sink up to 200 mA each, and can switch voltages up to 32 V. Limited power is available on the module faceplate for powering external devices. An on-board jumper permits either the +5, +12, or +24 V VXI power supplies to be used for powering external devices. The E1339A module includes a downloadable SCPI driver for the HP E1300/E1301A B-size mainframes or for the HP E1306A and E1406A Command Modules. This driver provides open/close commands for individual 72-channel operation or for 36-channel dual output operation (the latter is designed specifically for driving latching microwave relays).


[ Summary ][ Features ][ Specifications ][ Ordering ][ Assistance ]

Product Features



[ Summary ][ Features ][ Specifications ][ Ordering ][ Assistance ]

Product Specifications



General

Number of channels:    72
Channel type:    Output
Output or input type:    n/a
Memory:    n/a
Max. pattern rate:    n/a
32-bit block transfer:    n/a
Test synchronization:    n/a
Sink current per channel:    200 mA
Maximum open collector voltage:    n/a
Maximum available current (only one of the three internal
power supplies can be selected):

5 V:
+ 12 V:
+ 24 V:
   1 A (fused and requires P2)
1 A (fused)
1A ( fused and requires P2)

VXI Characterstics

VXI device type:    Register-based
Data Transfer Bus:    n/a
Size:    B
Slots:    1
Connectors:    P1/P2
Shared Memory:    None
VXI Busses:    None
C-size compatibility:    Requires E1407A

Instrument Drivers

Click here for driver availability and downloading.
Command Module Firmware:    Downloadable
Command Module Firmware Rev:    A.08
I-SCPI Win 3.1:    No
I-SCPI Series 700:    No
C-SCPI LynxOS:    No
C-SCPI Series 700:    No
HP VEE Drivers:    No
VXIplug&play Win Framework:    No
VXIplug&play Win95/NT Framework:    Yes
VXIplug&play HP-UX Framework    Yes

Module Current

IPM IDM

+5 V: 0.19 0.10
+12 V: 0.10 0.01
-12 V: ---- ----
+24 V: ---- ----
-24 V: ---- ----
-5.2 V: ---- ----
-2 V: ---- ----

Cooling/Slot

Watts/slot:    6
deltaP mm H2O:    0.05
Air flow liter/s:    0.42



[ Summary ][ Features ][ Specifications ][ Ordering ][ Assistance ]

Product Ordering Information

HP E1339A	72-Channel Digital Output/Relay Driver
   Opt 0B3      Service Manual
   Opt W01      3 yr. return to HP to 1 yr. OnSite warranty
   Opt 0B1      Add manual set 



[ Summary ][ Features ][ Specifications ][ Ordering ][ Assistance ]

To help you make the right instrument choices



Contact HP Test & Measurement. (c) Copyright 1994, 1995, 1996, 1997 Hewlett-Packard Company.

Page Updated: Thursday June 19 16:11:02 UTC 1997