![]() | ||
![]() |
HP E1352A VXI 32-Channel Single-Ended FET Multiplexer |
The HP E1352A FET multiplexer is a B-size, 1-slot, register-based VXI module that switches 32 channels of high only and one low common input.
The FET multiplexer module consists of a B-size component card (labeled E1351-66201 on each one) and a screw terminal block that plugs onto the component card. The HP E1352A is functionally similar to the HP E1351A, E1353A, E1357A, and E1358A.
An analog bus connector on the faceplate provides easy connection
to an HP E1326B DMM, HP E1411B DMM, and/or other slot-adjacent
multiplexers. Common high, low, and guard signals are connected
by tree switch to both the tree terminals on the terminal card and
the analog bus connector.
Note: Configuration software that allows you to easily select
compatible interfaces, controller platforms, and VXI test system
components is available on CD ROM. Order the
"Test System
and VXI Products Catalog and CD ROM" from
the Test & Measurement Catalogs available on this web site.
Input
DC: Maximum voltage (any terminal to any other terminal or chassis): 16 Vpk AC rms: Maximum voltage (any terminal to any other terminal or chassis): 16 Vpk Maximum current (per channel common, non-inductive): 1 mA Maximum power per channel: n/a
DC
Maximum thermal offset per channel, differential Hi-Lo: 25 µV (0 to 28°C), 250 µV (28 to 55°C), Closed channel resistance: <3.1 kOhm Insulation resistance (between any two points): 10E8 Ohm, 10E3 Ohm ±10% guard to chassis Insultation resistance (Hi to Lo, power off): >1 kOhm for |Vin| <14 V, >220 Ohm for |Vin| >14 V
AC
Minimum bandwidth (-3 dB, 50 Ohm source/ load): 500 kHz (1 MOhm || 10 pF termination) Crosstalk (channel-to-channel): 100 kHz: n/a 10 MHz: n/a Both: n/a Closed channel capacitance: <2000 pF Hi/Lo-Chassis, <200 pF Hi-Lo
General Characteristics
Relays: FETs Break-before-make Relays open on power down Relays open on power up Minimum relay life: No load: unlimited Rated load: unlimited Reference junction measurement accuracy (18 to 28 °C operating): n/a Strain gage excitation: n/a Screw terminal wire size: 16 to 26 AWG (1.5, 1.2, 0.9, 0.75, 0.5 mm) Scanning rate: 13,000 channels/s typ.
VXI Characteristics
VXI device type: Register-based,A16, slave only Size: B Slots: 1 Connectors: P1 Shared memory: None VXI busses: None C-size compatibility: Requires E1403B
Instrument Drivers
Click here for driver availability and downloading.Command module firmware: ROM Command module firmware rev: A.03 I-SCPI Win 3.1: Yes I-SCPI Series 700: Yes C-SCPI LynxOS: Yes C-SCPI Series 700: Yes HP VEE Drivers: Yes VXIplug&play Win Framework: Yes VXIplug&play Win95/NT Framework: Yes VXIplug&play HP-UX Framework: No (not available at time of publication)
Module Current
IPM IDM +5 V: 0.2 0.01 +12 V: 0.13 0.01
Cooling/Slot
Watt/slot: 1.00 deltaP mm H2O: 0.02 Air flow liter/s: 0.10
HP E1352A VXI 32-Channel Single-Ended FET Multiplexer Opt 0B3 Service manual Opt W01 3-yr. return to HP to 1-yr. on-site warranty HP E1352-80001 Extra screw terminal block HP E1411-80001 Digital FET mux-to-external DMM cableHPE1352A Technical Specifications Datasheet
If you do not have the Adobe Acrobat Reader necessary for viewing this documentation, download your Free Acrobat Reader now. |
![]() |
Page Updated: Thursday June 19 16:15:23 UTC 1997