HP E1367A Dual 1x4, 75 Ohm RF Multiplexer

[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]
The HP E1367A 75 Ohm RF Multiplexer is a B-size, 1-slot, register-based VXI module. It is the ideal choice for video and telecommunications applications. The HP E1367A is identical to the HP E1366A, except that the HP E1366A has a 50 Ohm characteristic impedance.

Switching consists of connecting a channel to its common terminal. The HP E1367A can easily be used with SCPI commands to scan multiple channels, where each channel is switched to its common, one at a time. When open (disconnected from common), each channel is connected to a 75 Ohm termination.

The HP E1367A is arranged as two independent banks of channels (Bank 0 and Bank 1), each acting as a 1x4 one-wire multiplexer. Only one channel in each bank can be connected to its common at any time. Each channel consists of a nonlatching, armature relay. At power-on or reset, all channels are open and connected to their termination resistors. The termination resistor can be removed if desired. The multiplexer relays are arranged in a tree-switched configuration, providing high isolation and low VSWR.

Refer to the Related Links Section below for instrument driver availability and downloading instructions, as well as for recent product updates, if applicable.


[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]


[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ] 

VXI Characteristics


VXI device type:       Register based, A16, slave only
Size:                  B
Slots:                 1
Connectors:            P1
Shared memory:         None
VXI busses:            None
C-size compatibility:  Requires HP E1403C





Instrument Drivers


See the HP Website (http://www.hp.com/go/inst_drivers) for driver
availability and downloading.

Command module firmware:                Downloadable
Command module firmware rev:            A.01
I-SCPI Windows® 3.1:                    Yes
I-SCPI Series 700:                      Yes
C-SCPI LynxOS:                          Yes
C-SCPI Series 700:                      Yes
HP Panel Drivers:                       Yes
VXIplug&play Windows Framework:         No
VXIplug&play Windows 95/NT® Framework:  Planned 1998
VXIplug&play HP-UX Framework:           No





Module Current


           IPM     IDM
  +5 V:    0.1     0.01
 +12 V:    0.18    0.01
 –12 V:    0       0
 +24 V:    0       0
 –24 V:    0       0
–5.2 V:    0       0
  –2 V:    0       0





Cooling/Slot


Watts/slot:        3.00
DeltaP mm H2O:     0.05
Air Flow liter/s:  0.25


[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ] 

HP E1367A       75 Ohm RF Multiplexer (2 x 4:1)
   Opt  0B3     Service Manual
   Opt  W01     3 Year Return to HP to 1 Year OnSite Warranty

Trademarks:


[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

HP E1367A Technical Specifications Datasheet ( PDF)

If you do not have the Adobe Acrobat Reader necessary for viewing PDF documentation, download your free Acrobat Reader now. Get Acrobat

[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

To help you make the right product choices

[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

Related Information:


Related VXI RF Multiplexer Modules product datasheets:

Related product families available online:



Privacy Statement    Use of this site indicates that you accept the Terms of Use
Contact HP Test & Measurement. (c) Copyright 1994 - 1998 Hewlett-Packard Company.

Page Updated: Thursday February 18 07:21:41 UTC 1999