HP E1418A 8/16-Channel D/A Converter

[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]
The HP E1418A 8/16-Channel D/A Converter is a C-size, 1-slot, register-based VXI module. It consists of 8 or 16 fully independent, isolated or non-isolated, 16-bit D/ As. Each channel can be set to voltage or current mode with local or remote sensing on voltage outputs. All outputs can be updated with register-level programming to allow fast backplane access. Each channel can be updated individually, or by using the internal data buffer, synchronized so that all channels change simultaneously. The channel output mode is set with jumpers in the terminal block for each channel or by register programming. Each D/A converter can be calibrated without removal through software commands and use of the terminal block CALBUS in conjunction with a 5.5-digit multimeter. The on/off terminal block has standard screw terminals for field wiring.

Refer to the Related Links Section below for instrument driver availability and downloading instructions, as well as for recent product updates, if applicable.


[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]


[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

VXI Characteristics

VXI device type: Register based Data transfer bus: A16 or A24, D16 Size: C Slots: 1 Connectors: P1/2 Shared memory: n/a VXI busses: n/a C-size compatibility: n/a

Instrument Drivers

See the HP Website (http://www.hp.com/go/inst_drivers) for driver availability and downloading. Command module firmware: Downloadable Command module firmware rev: A.08 I-SCPI Windows® 3.1: Yes I-SCPI Series 700: Yes C-SCPI LynxOS: Yes C-SCPI Series 700: Yes HP Panel Drivers: No VXIplug&play Windows Framework: Yes VXIplug&play Windows 95/NT® Framework: Yes VXIplug&play HP-UX Framework: No

Module Current

IPM IDM +5 V: 0.7 0.01 +12 V: 0.04 0.01 –12 V: 0 0 +24 V: 0.44 0.01 –24 V: 0.44 0.01 –5.2 V: 0 0 –2 V: 0 0

Cooling/Slot

Watts/slot: 25.4 DeltaP mm H2O: 0.10 Air Flow liter/s: 2.00


[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

HP E1418A    8-Channel D/A Converter, Non-Isolated
   Opt  001  16-Channel D/A Converter, Non-Isolated
   Opt  002  8-Channel D/A Converter, Isolated Channels
   Opt  003  16-Channel D/A Converter, Isolated Channels
   Opt  A3E  Crimp/Insert Connectors
   Opt  A3H  Ribbon Cable Connectors
   Opt  W01  3 Year Return to HP to 1 Year OnSite Warranty
HP E1523A    1-Channel Isolation Plug-on for HP E1418A*
HP E1524A    8 Non-isolated Channel Expansion Kit for HP E1418A**
HP E1525A    8 Isolated Channel Expansion Kit for HP E1418A**


*NOTE:   You can add isolation to single channels with HP E1523A.
**NOTE:  You can add an 8 channel expansion kit to existing
         8 channel units with the HP E1524A and E1525A.

Trademarks:


[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

HP E1418A Technical Specifications Datasheet ( PDF)

If you do not have the Adobe Acrobat Reader necessary for viewing PDF documentation, download your free Acrobat Reader now. Get Acrobat

[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

To help you make the right product choices

[ Summary ][ Features ][ Specifications ][ Key Literature ][ Ordering ][ Assistance ][ Related ]

Related Information:


Related VXI Analog Sources product datasheets:



Privacy Statement    Use of this site indicates that you accept the Terms of Use
Contact HP Test & Measurement. (c) Copyright 1994 - 1998 Hewlett-Packard Company.

Page Updated: Thursday February 18 05:19:07 UTC 1999