![]() | ||
![]() |
HP E1458A VXI 96-Channel Digital Input/Output |
The HP E1458A 96-Channel Digital Input/Output module is a C-size, 1-slot, register-based VXI module that offers twelve 8-bit bi-directional data ports. It provides block memory transfers and six GPIO handshake protocols (none, leading edge, trailing edge, pulse, partial, and strobe) for a wide range of applications.
Functionally similar to the HP E1330B, the HP E1458A is intended for digital I/O control applications such as digital subassembly test or data acquisition and control. Each of the 12 identical ports consists of eight data lines and six handshake/control lines.
Each 8-bit port is individually configured for positive/negative
true logic and read/write or tri-state condition. The HP E1458A is
arranged into three banks of four ports each. Ports can be combined
within a bank, allowing data transmission using bytes, words
(16-bit), or long words (32-bit). Data transmission can be from a
single port (8 bits) or from multiple ports up to all 12 ports.
Note: Configuration software that allows you to easily select
compatible interfaces, controller platforms, and VXI test system
components is available on CD ROM. Order the
"Test System
and VXI Products Catalog and CD ROM" from
the Test & Measurement Catalogs available on this web site.
General Characteristics
Logic levels: TTL Compatible, 5 V maximum Number of channels: 96 Channel type: Input or Output Output or input type: TTL Memory: none Max. pattern rate: n/a 32-bit block transfer: 325 Kb/s Test synchronization: Software triggers, hardware handshaking
Data Lines
Output characteristics: Iout (high): -5.2 mA @ Vout = 2.5 V (pull-up enabled) Iout (low): 48 mA @ Vout = 0.5 V Input characteristics: Iin (high): <2.5 mA @ Vin = 2.5 V Iin (low): <-3.2 mA @ Vin = 0.4 V Vin (high): >2.0 V (5.0 V maximum) Vin (low): <0.8 V
Handshake Lines
Output characteristics: Iout (high): 250 µA @ Vout (high): 5 V Iout (low): 40 mA @ Vout (low): 0.7 V Iout (low): 16 mA @ Vout (low): 0.4 V Input characteristics: Vin (high): >2.0 V Vin (low): <0.8 V Iin (low): <1.75 mA
Block Mode Transfers
8-bit wide: @ 90 KB/s 32-bit wide: @ 325 KB/s
VXI Characteristics
VXI device type: Register-based Size: C Slots: 1 Connectors: P1/P2 Shared memory: No VXI busses: No C-size compatibility: Yes
Instrument Drivers
Click here for driver availability and downloading.Command module firmware: Downloadable Command module firmware rev: A.06 I-SCPI Win 3.1: Yes I-SCPI Series 700: Yes C-SCPI LynxOS: Yes C-SCPI Series 700: Yes HP VEE Drivers: Yes VXIplug&play Win Framework: Yes VXIplug&play Win95/NT Framework: Yes VXIplug&play HP-UX Framework: No (not available at time of publication)
Module Current
IPM IDM +5 V: 1.2 0.1
Cooling/Slot
Watt/slot: 2.50 deltaP mm H2O: 0.04 Air flow liter/s: 0.21
HP E1458A VXI 96-Channel Digital Input/Output Opt 022 Opto 22 components cable Opt 0B3 Service manual Opt W01 3-yr. return to HP to 1-yr. on-site warrantyHP E1458A Technical Specifications Datasheet
If you do not have the Adobe Acrobat Reader necessary for viewing this documentation, download your Free Acrobat Reader now. |
![]() |
Page Updated: Thursday June 19 16:15:40 UTC 1997