HP E1465A VXI 16x16 Relay Matrix

Product Summary

The HP E1465A relay matrix is a C-size, 1-slot, register-based VXI module. This 16x16 matrix switches each crosspoint--both high and low. The HP E1465A features easy expansion to larger matrixes via a chaining cable that allows you to interconnect rows and columns on different modules. A full HP E1401B 13-slot mainframe can have up to 3072 2-wire crosspoints.

The HP E1465A module provides the best cost-per-crosspoint for large matrix applications. It shares the same switch card with the HP E1466A and E1467A; each product’s unique terminal block determines the matrix configuration. Therefore, you can change matrix topology simply by plugging in the various terminal blocks. The terminal blocks can be obtained separately. Creating a matrix as large as 32x32 requires four matrix modules and interconnected rows and columns on the terminal blocks. All the HP E1465/66/67A matrix modules offer similar densities, with different row/column sizes and identical performance specifications. All specifications are identical for this family, except for crosstalk.

Product Features

• 16x16 two-wire switching matrix
• Rows and columns expand to make larger matrixes
• 1A, 200-V signal switching
• Downloadable channel lists into onboard memory for higher system throughput
• Includes HP QUIC easy-to-luse terminal blocks
• Interchangeable terminal blocks allow changing between 3 matrix types
• VXIplug&play frameworks are supported per the Instrument Drivers information listed below.

Note: Configuration software that allows you to easily select compatible interfaces, controller platforms, and VXI test system components is available on CD ROM. Order the "Test System and VXI Products Catalog and CD ROM" from the Test & Measurement Catalogs available on this web site.

Product Specifications

Input (HP E1465A)
Maximum Voltage (any terminal to any other terminal chassis):
	DC:	200 V
	AC rms:	170 V
	Peak:	238 Vp-p

Maximum Power:	
        Per module:  62.5 VA (resistive load)
        Per channel: 30 W




DC (HP E1465A)
Maximum Thermal Offset:	5 µV (per channel, differential Hi-Lo)

Closed Channel Resistance (per channel):	<4.0 ohms initially (worst crosspoint)
						<1.8 ohms initially (best crosspoint)
						<10.0 ohms end of relay life

Insulation Resistance (between any two points):	>10E8 ohms (<=40°C, <=95% RH)
						>10E8 ohms (<=25°C, <=40% RH)

Minimum Bandwidth (-3 dB, ZL=ZX=50 ohms):	10 MHz




AC (HP E1465A)
AC specifications apply with no more than one crosspoint closed per row or column.
Specifications are for 16x16 matrix, for Z(load)=Z(source)=50 ohms.

Crosstalk(1)
Within a Card (worst path)			<10 kHz		<100 kHz	<1 MHz
	Closed Path to Closed Path (typical)(3)	-78 dB		-57 dB		-41 dB
	Open Row to Open Row (typical)(3)	-93 dB		-73 dB		-46 dB
	Open Row to Open Column (typical)(3)	-84 dB		-63 dB		-47 dB
	Open Column to Open Column (typical)(3)	-86 dB		-65 dB		-48 dB
Module-to-Module(2) (represents 16x32 configuration)
	Closed Path to Closed Path (typical)(3)	-78 dB		-58 dB		-43 dB
	Open Row to Open Row (typical)(3)	-84 dB		-66 dB		-52 dB
	Open Row to Open Column (typical)(3)	-84 dB		-63 dB		-48 dB
	Open Column to Open Column (typical)(3)	-93 dB		-72 dB		-48 dB
Closed Channel Capacitance:
	Hi to Lo:	<270 pF
	Hi to Ground:	<430 pF
	Lo to Ground:	<440 pF

NOTES:	(1) Specifications are for worst crosspoint. Matrix expansion degrades crosstalk and
	    bandwidth performance.
	(2) Chaining cable used to connect modules (HP P/N E1466-80002).
	(3) Typical is defined as the worst crosspoint test result from one or two matrix 
	    modules. If guaranteed specifications are necessary, contact your local sales 
	    representative.

Minimum bandwidth (-3 dB, 50 Ohm):  10 MHz



General (HP E1465A)
Time to close one channel:  8.9 ms (HP V743 and C-SCPI)

Power-down state:           Relay states are unchanged at power-down.

Power-up state:             Relays are open at power-up.

Minimum Relay Life:	   No load 10E7 operations

Screw Terminal Wire Size:   18 to 26 AWG (1.2, 0.9, 0.75, 0.6, 0.5 mm)


VXI Characteristics
VXI device type:        Register-based, A16, slave only
Size:                   C
Slots:                  1 
Connectors:             P1
Shared memory:          None
VXI busses:             None
C-size compatibility:   n/a

Instrument Drivers
Click here for driver 
availability and downloading.
Command module 
 firmware:               ROM 
Command module 
 firmware rev:           A.08
I-SCPI Win 3.1:          Yes
I-SCPI Series 700:       Yes
C-SCPI LynxOS:           Yes
C-SCPI Series 700:       Yes
HP VEE Drivers:          Yes
VXIplug&play Win 
Framework:               Yes
VXIplug&play Win95/NT 
Framework:               Yes
VXIplug&play HP-UX 
Framework:               No (not available at time of publication)


Module Current
                IPM       IDM 
+5 V:           0.1       0.01
+12 V:          0.18      0.01



Cooling/Slot
Watt/slot:  5.00
deltaP mm H2O:  0.08
Air Flow liter/s:  0.42

Product Ordering Information

HP E1465A	VXI 16x16 Relay Matrix
   Opt 0B3	Service manual  
   Opt W01	3-yr. return to HP to 1-yr. on-site warranty

HP E1465-80001	Terminal block, 16x16 relay matrix
HP E1466-80002	Cable kit, daisy chain

HP E1465A Technical Specifications Datasheet

If you do not have the Adobe Acrobat Reader necessary for viewing this documentation, download your Free Acrobat Reader now.

To help you make the right instrument choices

Your Field Sales Engineer is ready to answer your questions about specifications, applications and ordering. Find your Field Sales Engineer at your Local Sales Office.

[Hewlett-Packard] [Test & Measurement] [Product Information] [Model Number Index]

Contact HP Test & Measurement. (c) Copyright 1994, 1995, 1996, 1997 Hewlett-Packard Company.

Page Updated: Thursday June 19 16:15:25 UTC 1997