![]() | ||
![]() |
HP E1469A VXI 4x16 Relay Matrix |
The HP E1469A matrix is a C-size, 1-slot, register-based VXI module. This module consists of a 64-channel 2-wire relay component card (same component card as the HP E1460A). A terminal block, which provides 4x16 matrix topology, is included.
The HP E1469A matrix switches both high and low on each crosspoint.
Multiple modules can easily be interconnected with the HP
E1468-80002 daisy-chain cable. The HP E1468-80002 daisy-chain cable
allows quick connect and disconnect of one module from another and
is easily attached to expansion connectors on the HP E1469A terminal
blocks. For applications requiring more than 64 crosspoints, the
newer HP E1465/66/67A relay matrixes are recommended unless your
application requires the high voltage/power capability and superior
crosstalk performance of the HP E1469A matrix.
Note: Configuration software that allows you to easily select
compatible interfaces, controller platforms, and VXI test system
components is available on CD ROM. Order the
"Test System
and VXI Products Catalog and CD ROM" from
the Test & Measurement Catalogs available on this web site.
Input (HP E1469A)
Maximum voltage (any terminal to any other terminal chassis): DC: 220 V AC rms: 250 V Maximum current (per channel, non-inductive): 1Adc or ac rms (V<30 Vdc/rms) 0.3 Adc or ac rms (V<220 Vdc/rms) Maximum power: Per module: 40 VA
DC (HP E1469A)
Maximum thermal offset: 7 µV (per channel, differential Hi-Lo) Closed channel resistance (per channel): <1.5 ohms initially <3.5 ohms end of relay life Insulation resistance (between any two points): 5x10E8 ohms (<=40°C, <=95% RH) 5x10E8 ohms (<=25°C, <=40% RH) Minimum bandwidth (-3 dB, ZL=ZX=50 ohms): 10 MHz, 25 MHz (typical)
AC (HP E1469A)
Minimum bandwidth (-3 dB, 50 Ohm): 10 MHz, 25 MHz (typical) Crosstalk (channel-to-channel): 10 kHz: <-90 dB (single matrix only) Closed channel capacitance: Hi-Lo: 650 pF Lo-Chassis: 700 pF
General (HP E1469A)
Bias current: <0.5 nA/Volt (at 25°C, 25% RH, from Hi or Lo to chassis, per group of 16 channels) Minimum relay life: No load: 4x10E6 operations Screw terminal wire Size: 18 to 26 AWG (1.2, 0.9, 0.75, 0.6, 0.5 mm)
VXI Characteristics
VXI device type: Register-based, A16, slave only Size: C Slots: 1 Connectors: P1/2 Shared memory: None VXI busses: TTL trigger bus C-size compatibility: n/a
Instrument Drivers
Click here for driver availability and downloading.Command module firmware: ROM Command module firmware rev: A.04 I-SCPI Win 3.1: Yes I-SCPI Series 700: Yes C-SCPI LynxOS: Yes C-SCPI Series 700: Yes HP VEE Drivers: Yes VXIplug&play Win Framework: Yes VXIplug&play Win95/NT Framework: Yes VXIplug&play HP-UX Framework: No (not available at time of publication)
Module Current
IPM IDM +5 V: 0.1 0.1
Cooling/Slot
Watt/slot: 5.00 deltaP mm H2O: 0.08 Air Flow liter/s: 0.42
HP E1469A VXI 4x16 Relay Matrix Opt 0B3 Service manual Opt W01 3-yr. return to HP to 1-yr. on-site warranty HP E1469-80011 Extra screw terminal block HP E1468-80002 Cable kit, daisy chainHPE1469A Technical Specifications Datasheet
If you do not have the Adobe Acrobat Reader necessary for viewing this documentation, download your Free Acrobat Reader now. |
![]() |
Page Updated: Thursday June 19 16:15:37 UTC 1997