HP E1810A OpenRobot Digital I/O Board

The HP E1810A OpenRobot Digital I/O Board adds an additional 48 digital I/O points to an HP OpenRobot Controller. It connects directly to Opto 22 carrier boards providing a wide range of voltage and current ratings.

[ Features ]

48 point digital I/O board and I/O driver for the HP OpenRobot Controller
Inputs and Outputs are configurable in groups of 8 for up to 6 groups
Directly connects to two Opto 22 PB 24 carrier boards (cables, carrier boards, & isolators are not included)

[ Specifications ]

User

2 - 50 pin header connectors User selectable interrupts IRQ 2-15

Environmental

Temperature 0 - 55° C

Humidity 15 - 95% non-condensing

Power 5 V 500 mA typ., 800 mA max

Dimensions 185mm (L)x 100mm (H) Mass 250g

[ Ordering ]

HP E1810A OpenRobot Digital I/O Board

----Available in North America Only---- To help you make the right controller choices, Your Sales Engineer is ready to answer your questions about specifications, applications and ordering. Call the OpenRobot Help Desk at 248.844.0555 or email us at "openrobotsales@hp.com". Do you require hardware or software technical support? OpenRobot technical support is available at 248.844.0555 or email us at "openrobotsupport@hp.com".

All orders include the following:
1 - HP E1810A OpenRobot Digital I/O Board 1 - HP E1810A driver

[ Key Literature ]

No literature is available online at this time.

[ Assistance ]

To help you make the right instrument choices

Local Sales Office

[ Related ]

Related Information:

HP OpenRobot I/O Boards

Related product families available online:

HP OpenRobot Controller