![]() | ||
![]() |
HP E2406A Motorola 68030 Preprocessor Interface |
The HP E2406A provides an easy way to connect your Motorola 68030
target system to an HP logic analyzer. The preprocessor
provides a complete electrical and mechanical interface between
your target system and an HP logic analyzer. Included with the E2406A
is software which automatically configures the analyzer labeling
address, data and status lines. The inverse assembler decodes bus
activity and displays 68030 mnemonics in state listings.
Microprocessor Compatibility
128 pin PGA up to 50 MHz Motorola MC68030
Logic Analyzers Supported
HP 165X HP 16510 HP 16540A/D, 16541A/D HP 16542A HP 16550A HP 1655XA HP 1661A/AS, C/CS HP 1671A
Probes Required
Five 16-channel probes are required for complete state disassembly and to monitor all signals
Adapters
All pods are terminated on the probe. No additional TAs need to be ordered.
Signal Line Loading
One TTL load plus 3 pF maximum on AS, CBREQ, CLK, REFILL and RESET One TTL load, one FCT load plus 3 pF maximum on CLK One FCT load plus 3 pF maximum on all other signals
Environmental
Temperature Operating 0 to +55 C (+32 to +131 F) Nonoperating -40 to +75 C (-40 to +167 F) Humidity Up to 90% noncondensing. Avoid sudden extreme temperature changes which could cause condensation within the instrument Altitude Operating 4,600 m (15,000 ft) Nonoperating 15,300 m (50,000 ft)
Additional Characteristics:
Operations Displayed: Burst Transfer User Data Read/Write, User Program Read Supervisor Read/Write, Supervisor Program Read Bus Grant CPU Space Accesses including Breakpoint Acknowledge, Interrupt Acknowledge, Access Level Control and Coprocessor Communication Target Signal Timing 2 ns setup and 2 ns hold with respect to the rising edge of the target clock (CLK) on STERM , CBACK and CIIN 1 ns setup and 6 ns hold with respect to the falling edge of the target clock (CLK) on all other lines
HP E2406A Motorola 68030 Preprocessor Interface
All orders include the following:
Preprocessor Interface hardware (including circuit card and cables) Inverse assembler and configuration software Five 100kohm termination modules (HP 01650-63204) Four jumpers (HP 1258-3743) User's Guide
Page Updated: Thursday June 19 16:11:45 UTC 1997