![]() | ||
![]() |
HP E2447AA Motorola 68000 Preprocessor Interface |
The Motorola 68000 preprocessor interface provides an easy way to
connect your Motorola 68000 microprocessor to a HP logic analyzer.
All necessary clocks are passed through the preprocessor to the logic
analyzer, ensuring that the data is captured at the correct time.
Microprocessor Compatibility
68000, 68010, 68HC000 68-pin PGA through 16.7 MHzLogic Analyzers Supported
HP 1650, 1652, 1654 HP 16510B, 16511B HP 16554A, 16555A, 16556A HP 1660C, 1661C, 1662C, 1663C, 1664CPods Required
Four pods allow timing measurement of all processor signals Note: Each preprocessor has three connectors available for state analysis with additional connectors for timing analysis for all signals. For disassembly, three pods must be used. All signals used in disassembly can be double probed for state and timing analysis.Adapters
All connectors are terminated on the preprocessor; no termination adapters are required. For timing analysis, one termination adapter is required per pod. Adapters available: PLCC/PGA IC Chip Carrier Socket PGA/PLCC Adapter 64-pin DIP and 69-pin PLCC adapters are available through Emulation Technology (408)982-0660Signal Line Loading
50 kOhms plus 22 pF on USD 100 kOhms plus 18 pF on all other lines
HP E2447AA Motorola 68000 Preprocessor InterfaceHP E2447AA and E2447AB Motorola 68000 and 68EC000 Preprocessor InterfacesHP 1200-1751 PLCC/PGA IC Chip Carrier Socket HP 1200-1752 PGA/PLCC Adapter
If you do not have the Adobe Acrobat Reader necessary for viewing this documentation, download your Free Acrobat Reader now. |
![]() |
All orders include the following:
Configuration software
Inverse assembler
Page Updated: Thursday June 19 16:21:47 UTC 1997