HP ESG-D Series: Option H97 Multi-Channel W-CDMA Personality

The HP ESG-D Series RF Signal Generators with Option H97 (HP E4432B and E4433B) provide multi-channel wideband CDMA signals for base station and mobile tests.

To provide you with a complete product solution and protect your investment in the HP-ESG-series RF signal generator family, HP provides:

Standard three-year global warranty
Two-year calibration cycle
Worldwide Call Center and Service Center support network
Full Year-2000 compliance
Optional PC-based performance verification and adjustment software
Free firmware upgrades available on this web site
Manuals on CD-ROM and available on this web site
Answers to frequently asked questions available on this web site
Application and product notes available on this web site
HP-IB, and serial interfaces for connectivity with computers
VXIplug&play instrument driver with programming examples

Optional services include customized, practical education for users including wireless technology basics and HP ESG applications.

A complete overview of the HP ESG Family is provided at: HP ESG Family of Digital and Analog RF Signal Generators.

[ Features ]

Generates multi-channel W-CDMA downlink signals for experimental systems
Typically better than -63 dBc adjacent channel power (ACP) for one DTCH
Select from a list of pre-defined channel configurations including Perch only, Perch plus
multiple DTCH and Multiple DTCH without Perch (choose 1 to 127 channels)
Configure up to 512 channels, each with individually selectable symbol rate, power,
short code, long code, symbol offset, TPC, and data pattern
Choose either 4.096, 8.192, or 16.384 Mchip/sec rates masked symbols

[ Specifications ]

Supplemental Specifications¹

Frequency range:            20 MHz to 3 GHz (HP E4432B)
                            20 MHz to 4 GHz (HP E4433B)

Chip rates:                 4.096, 8.192 or 16.384 Mchips/sec

Modulation:                 QPSK with long and short code spreading

Pre-defined channel configurations      
(All pre-defined channels at 4.096 Mcps, root Nyquist 0.22 alpha filter, 
long code 1, alternating up and down TPC bits, offset symbols. Channel powers 
computed to scale for equal energy per symbol.)
1 DTCH:                     Single 32 ksps DTCH on short code 8
3 DTCH:                     Three 32 ksps DTCH on short codes 8, 9, and 10
Perch 1:                    Single Perch 1 on short code 0
Perch 1 + 1 DTCH:           Perch on short code 0; 32 ksps DTCH on short code 8
Perch 1 + 3 DTCH:           Perch on short code 0; 32 ksps DTCH on short codes 8, 
                            9, and 10
Perch 1 + 50 DTCH:          Perch on short code 0; 32 ksps DTCH on short codes 8 
                            through 57

User-defined W-CDMA:      	
Channel table editor	
  Links:                    Uplink, downlink
  Number of channels:       up to 512
  Symbol rates:             16, 32, 64, 128, 256, 512, 1024 ksymbols/sec
  Short code:               0 to 1023, limited by symbol rate and chip rate
  Channel power:            0 dB to -40 dB, 0.02 dB resolution
  Symbol offset:            Random, 0 to 639, limited by symbol rate
  TPC:                      0000 to FFFF(HEX)
  Long code:                Uplink: 0 to 1FFFFFFFFFF(HEX)
  Data pattern:             Random, 00 to FF(HEX)


Perch 1 structure (1 repeating frame):      
Short code:                 0 to 1023, limited by chip rate
Symbol rate:                16 ksymbols/sec
Long code mask (LCM):       Yes
Short code number for 	
LCM symbols:                1

Frame Duration:             10 ms

Filters:      
W-CDMA root Nyquist:        alpha = 0.22
Nyquist, root Nyquist:      alpha = 0 to 1
Gaussian:                   B_bT = 0.1 to 1
Custom FIR:                 Up to 256 coefficients, 16-bit resolution
IS-95 filters:              IS-95, IS-95 with equalizer, IS-95 modified, 
                            IS-95 modified with equalizer
Rectangle:

I/Q mapping:                Normal, invert

Error vector magnitude:      
(1.8 GHz<f_c<2.2 GHz, default W-CDMA filters, 4.096 Mcps chip rate, <=4 dBm, <=7 dBm 
with Option UNB)
1 DTCH:                     2.3%, typical

Adjacent channel power:      
(1.8 GHz<f_c<2.2 GHz, default W-CDMA filters, 4.096 Mcps chip rate, <=-2 dBm, <=0 dBm 
with Option H99)

          Electronic Attenuator      Mechanical Attenuator      Low ACP
          (standard)                 (Option UNB)               (Option H99)
1 DTCH:   –58 dBc, typical           –58 dBc, typical           –63 dBc, typical
127 DTCH+
 Perch 1: –50 dBc, typical           –56 dBc, typical           –62 dBc, typical

Recommended configuration includes HP E4432B or E4433B with Options UND, H97,
H99 and 1E5.

¹Refer to the HP ESG Series Technical Specifications under Key Literature
for base instrument specifications.

Declarations of Conformity

If you have Adobe's Acrobat Reader already available on your system, please click on the icon provided below to print or view the specifications.

If you do not have the Adobe Acrobat Reader necessary for viewing PDF documentation, download your free Acrobat Reader, and then click on the icon below.

European Regulatory Declarations of Conformity.

[ Ordering ]

HP ESG-D Series RF Signal Generator Option H97 requires Option UND Internal dual arbitrary waveform generator AND one of the following RF Signal Generators: HP E4432B ESG-D Series Digital and Analog RF Signal Generator, 250 kHz to 3 GHz HP E4433B ESG-D Series Digital and Analog RF Signal Generator, 250 kHz to 4 GHz Opt H97 Multichannel W-CDMA personality (Requires Opt UND; not compatible with Opt H03 or H98) Opt UND Internal dual arbitrary waveform generator (Not compatible with Opt H03 or H98) Opt 1E5 High-stability timebase Opt UNB High power with mechanical attenuator (Not compatible with Opt UNA, H03, H98 or H99) Opt UN8 Real-time I/Q baseband generator with TDMA standards and 1M RAM (Not compatible with Opt H03 or H98) Opt UN9 Adds 7M RAM to Option UN8 (Requires Opt UN8; not compatible with Opt H03 or H98) Opt UNA Alternate timeslot level control (Requires Opt UN8; not compatible with Opt UNB, H98 or H99) Opt UN7 Internal bit-error-rate (BER) analyzer (Requires Opt UN8; not compatible with Opt H03 or H98) Opt UN5 Single and multichannel CDMA personality (Requires Opt UND; not compatible with Opt H03 or H98) Opt H99 Improved ACP performance for TETRA, CDMA and W-CDMA (Not compatible with Opt UNA, UNB or H03)

[ Key Literature ]

HP ESG-D Series RF Signal, Product Overview ( PDF)
HP ESG Series, Technical Specifications ( PDF)
HP ESG Series RF Digital and Analog Signal Generators, Brochure ( PDF)
WideBand CDMA - Testing with ESG-D Signal Generators ( PDF)
W-CDMA Solutions from HP, Brochure ( PDF)

If you do not have the Adobe Acrobat Reader necessary for viewing PDF documentation, download your free Acrobat Reader now.

[ Assistance ]
Additional help is a click away!

Want to talk to a knowledgeable engineer about this product at our HP Test and Measurement Call Center? Do you have a question you want to send in by e-mail? A measurement set-up you need to fax in? Follow the link above and you will be given a choice to contact an engineer by telephone, e-mail or fax.

This service is available only in the United States. For assistance outside the U.S., contact your local HP DIRECT or HP Sales Office.

[ Related ]