HP ESG-D Series: Option H99 Improved ACP for IS-95 CDMA, W-CDMA and TETRA

Option H99 is designed to improve adjacent channel power performance (ACP or spurious emissions) of 3 and 4 GHz HP ESG-D Series RF Signal Generators (HP E4432B and E4433B) for IS-95 CDMA, W-CDMA and TETRA applications.

To provide you with a complete product solution and protect your investment in the HP-ESG-series RF signal generator family, HP provides:

Standard three-year global warranty
Two-year calibration cycle
Worldwide Call Center and Service Center support network
Full Year-2000 compliance
Optional PC-based performance verification and adjustment software
Free firmware upgrades available on this web site
Manuals on CD-ROM and available on this web site
Answers to frequently asked questions available on this web site
Application and product notes available on this web site
HP-IB, and serial interfaces for connectivity with computers
VXIplug&play instrument driver with programming examples

Optional services include customized, practical education for users including wireless technology basics and HP ESG applications.

A complete overview of the HP ESG Family is provided at: HP ESG Family of Digital and Analog RF Signal Generators.

[ Features ]

Uses the mechanical attenuator of Option UNB (high power with mechanical attenuator)
Provides typically better than -79 dBc spurious emissions for a reverse IS-95 CDMA signal
above 700 MHz and at an offset up to 1.25 MHz, when option UN5 (multichannel CDMA
personality) is also installed
Generates W-CDMA with typically better than -63 dBc ACP for one traffic channel (DTCH),
when Option H97 (multichannel W-CDMA personality) is also installed
Provides typically better than -72 dBc TETRA signals in the adjacent channel in continuous
mode, when Option UN8 (real-time I/Q baseband generator with TDMA standards and
1M RAM) is also installed
Not compatible with Options UNA (alternate timeslot power control) or Option UNB (high
power with mechanical attenuator)

[ Specifications ]

Supplemental Specifications for HP E4432B or E4433B instruments with Option H99

Spurious Emissions for IS-95 CDMA (with high crest factor on) with Option UN5:

 Channels/Offsets       .885 to 1.25 MHz            1.25 to 1.98 MHz  1.98 to 5 MHz¹
                        Std      UNB      H99       Std  UNB  H99     Std  UNB  H99
 Reverse (at <=0 dBm)
 30-200 MHz             -66(-72) -70(-75) -71(-73)  (-76)(-78)(-74)   (-79)(-79)(-77)
 700-1000 MHz           -68(-73) -72(-76) -78(-79)  (-76)(-79)(-82)   (-79)(-79)(-79)
 1000-2000 MHz          -63(-66) -70(-74) -78(-79)  (-70)(-78)(-82)   (-79)(-79)(-79)
 
 9/64 channels (at <=-2 dBm)     
 30-200 MHz             -65(-68) -68(-71) -70(-72)  (-73)(-76)(-72)   (-78)(-78)(-77) 
 700-1000 MHz           -64(-70) -69(-73) -73(-75)  (-75)(-77)(-79)   (-79)(-79)(-79)
 1000-2000 MHz          -60(-63) -67(-71) -72(-74)  (-68)(-75)(-78)   (-78)(-78)(-78)

¹Specifications apply with high crest factor off

Adjacent Channel Power for W-CDMA with Option H97:
(f_c 1800 to 2200 MHz, at 4.096 Mchip/sec, typical,  <=–2 dBm, at 25 ±5 °C)

           Standard                Option UNB                 Option H99
 1 DTCH:   –58 dBc                    –58 dBc                    –63 dBc
 20 DTCH:  –50 dBc                    –56 dBc                    –62 dBc

Adjacent Channel Power for W-CDMA with Option H98:
(f_c 1800 to 2200 MHz, at 4.096 Mchip/sec, typical,  <=–2 dBm, at 25 ±5 °C)
 1 DTCH:                –61 dBc (-63 dBc)

Adjacent Channel Power for TETRA with Option UN8:
(In 25 kHz bandwidth, with 18 kHz root Nyquist filter, at power levels <=4 dBm; 
<=8 dBm with UNB)
 Continuous Mode:       -72 dBc

The following specifications are different than the standard specifications of the 
base instrument 

Output Power
250 kHz to 3 GHz        +10 to -136 dBm
>3 GHz                  +4 to -136 dBm

Level Accuracy          Specifications degrade by 0.2 dB
With digital 
modulation              <3 GHz specifications apply at <+7 dBm
                        >3 GHz specifications apply at <+4 dBm

Non harmonics (<+4 dBm) <-53 dBc at offsets >3 kHz

AM                      Specifications are typical up to 3 GHz,
                        Not specified above 3 GHz

Pulse Modulation        >60 dB on/off ratio at f_c <250 MHz

Refer to the HP ESG Series "Technical Specifications" under Key Literature
for base instrument specifications.

Declarations of Conformity

If you have Adobe's Acrobat Reader already available on your system, please click on the icon provided below to print or view the specifications.

If you do not have the Adobe Acrobat Reader necessary for viewing PDF documentation, download your free Acrobat Reader, and then click on the icon below.

European Regulatory Declarations of Conformity.

[ Ordering ]

HP ESG-D Series RF Signal Generator Option H99 Requires one of the following RF signal generators: HP E4432B ESG-D Series RF Signal Generator, 250 kHz to 3 GHz HP E4433B ESG-D Series RF Signal Generator, 250 kHz to 4 GHz Opt H99 Improved ACP performance for TETRA, CDMA and W-CDMA (Not compatible with Options UNA, UNB or H03) Opt 1CM Rackmount kit Opt 1CN Handle kit Opt 1CP Rackmount and handle kit Opt 1E5 High stability timebase Opt 1EM Rear-mounted connectors Opt UND Internal dual arbitrary waveform generator (Not compatible with Options H03 or H98) Opt UN8 Real-time I/Q baseband generator with TDMA standards and 1M RAM (Not compatible with Options H03 or H98) Opt UN9 Adds 7M RAM to Option UN8 (Requires Option UN8; not compatible with Options H03 or H98) Opt UN7 Internal bit-error-rate (BER) analyzer (Requires Option UN8; not compatible with Options H03 or H98) Opt UN5 Multichannel CDMA personality (Requires Option UND; not compatible with Options H03 or H98) Opt H97 Multichannel W-CDMA personality (Requires Option UND; not compatible with Options H03 or H98) Opt H98 Real-time W-CDMA for Receiver tests (Not compatible with Options UNB, UND, UN5, UN7, UN8, H03 or H97)

[ Key Literature ]

HP RF Signal Generators Options For The HP ESG Family ( PDF)
HP ESG Series RF Digital and Analog Signal Generators, Brochure ( PDF)
HP ESG Series RF Signal Generators, Technical Specifications ( PDF)
HP ESG Series RF Signal Generators, Configuration Guide ( PDF)

If you do not have the Adobe Acrobat Reader necessary for viewing PDF documentation, download your free Acrobat Reader now.

[ Assistance ]
Additional help is a click away!

Want to talk to a knowledgeable engineer about this product at our HP Test and Measurement Call Center? Do you have a question you want to send in by e-mail? A measurement set-up you need to fax in? Follow the link above and you will be given a choice to contact an engineer by telephone, e-mail or fax.

This service is available only in the United States. For assistance outside the U.S., contact your local HP DIRECT or HP Sales Office.

[ Related ]