HP E5125A E1 Interface Pod

The HP E5125A E1 2.048 Mb/s Interface Pod generates and analyzes 2.048 Mb/s PDH frames using the HP E5200A Broadband Service Analyzer.

[ Features ]

Generates and analyzes 2.048 Mb/s PDH frames
E1 line rate of 2.048 Mb/s
Alarm and error generation
Comprehensive range of measurements

Supports the basic frame and the CRC-4 multiframe structures at 2.048 Mb/s as specified in ITU-T G.703, ITU-T G.704, ITU-T G.706, ITU-T G.804, ITU-T G.823, ITU-T G.775, ITU-T I.431, ATM Forum E1 Physical Layer Interface Specification

[ Specifications ]

Inputs and Outputs
Line Code       HDB3

Load Impedence  5 Ohm resistive: unbalanced BNC 
                120 Ohm resistive: balanced ISO/IEC 10173 (RJ-48)

Gain Control    0 dB/20 dB selectable

Transmit Levels Unbalanced (BNC) 2.37 V peak +/- 10%
                Balanced (RJ-48) 3.0 V peak +/- 10%

Signal Level    0 dB/4 dB loss (flat) selectable

Connectors      Unbalanced 75 Ohm (BNC)
                Balanced 120 Ohm (RJ-48) 


Operating Modes
Full duplex

Transmit loopback

Receive loopback

Loop through


Measurements
LOS (S)
OOF (S)
AIS (S)
RAI (S)
LCV Error (C,R,S)
CRC-4 Error (C,R,S)
FEBE (C,R,S)
Number of Frames (C)
C = Count

R = Ratio

S = Errored seconds



Physical Specifications
Size		149mm (W) x 222mm (D) x 44mm (H)
		(5.8in x 8.7in x 1.7in)

Weight		Approximately 1 kg (2.2lb)

Environmental	Operating Temperature	0° to 50°C
		Storage Temperature	-40° to 70°C

Humidity	Maximum 95 % @ 40°C
		Minimum 15 % @ 40°C

[ Ordering ]

HP E5125A Interface Pod, E1 2.048 Mb/s Opt UK6 Factory Calibration Test Data HP E5200A Broadband Service Analyzer Opt 125 Add E1 2.048 Mb/s Interface Pod

[ Key Literature ]