HP E5126A J2 Electrical Interface Pod

The HP E5126A J2 6.312 Mb/s Electrical Interface Pod generates and analyzes 6.312 Mb/s PDH frames on the HP E5200A Broadband Service Analyzer.

[ Features ]

Generates and analyzes 6.312 Mb/s PDH frames
Line rate of 6.312 Mb/s
Alarm and error generation
Supports the 6.312 Mb/s framing format as specified in ITU-T G.703, ITU-T G.704, ITU-T G.804, NTT Technical Reference of Cell Relay Interface Ver.1., NTT Cell Relay Service UNI Specification Ver 0.1., ATM Forum 6,312 kbps UNI Specification

[ Specifications ]

Inputs & Outputs
Line Code           B8ZS

Load Impedence      Unbalanced, 75 ohms+/- 5%

Transmit Levels     @ 3.156 Mb/s : 6.2 to 13.3 dBm 
                    @ 6.312 Mb/s : <-14 dBm as per G.703

Connectors          BNC


Operating Modes
Full Duplex

Receive Loopback

Transmit Loopback


J2 Measurements
LOS (S)
LOF (S)
AIS (S)
Payload AIS (S)
RAI (S)
Code Violation (C,R,S)
CRC-5 (C,R,S)
MFAS (C,R,S)
C = Count

R = Ratio

S = Errored seconds



Physical Specifications
Size		149mm (W) x 222mm (D) x 44mm (H)
		(5.8in x 8.7in x 1.7in)

Weight		Approximately 1 kg (2.2lb)

Environmental	Operating Temperature	0° to 50°C
		Storage Temperature	-40° to 70°C

Humidity	Maximum 95 % @ 40°C
		Minimum 15 % @ 40°C

[ Ordering ]

HP E5126A J2 Electrical Interface Pod Opt UK6 Factory Calibration Test Data HP E5200A Broadband Service Analyzer Opt 126 Add J2 6.312 Mb/s Electrical Interface Pod

[ Key Literature ]