HP E7830A ATM Forum UNI 3.1 ATM Layer Conformance Test Suite for Intermediate Systems

The HP E7830A ATM Forum UNI 3.1 ATM Layer Conformance Test Suite for Intermediate Systems is designed to test the Cell Layer function at the UNI for ATM Intermediate Systems, e.g. ATM switches. Derived from the ATM Forum Testing Sub-Working Group's output, HP has developed the ATS, which has been approved by the ATM Forum. The ATM Forum Cell Layer Executable Test Suite (ETS) is an implementation of the ATM Forum ATM Layer Conformance Abstract Test Suite (ATS) for Intermediate Systems. The Cell Layer test suite consists of 46 test cases in 8 test groups.

The ATS allows two Points of Control and Observation (PCOs) corresponding to two Cell Protocol Processor (CPP) and 2 Line Interface (LIF) pairs on the Protocol Tester.

ATM Network equipment manufacturers and network operators can expect to achieve higher confidence with regard to their implementation with this automated conformance test software.

[ Features ]

The test suite organization is as follows:
- 11 General - 11
- 1 Cell Discrimination/VCI
- 5 Cell Discrimination/PTI
- 3 M Plane/Information Flows
- 8 M Plane/OAM Cell Format
- M Plane/Fault
- 9 Management/Alarm Surveillance
- 5 M Plane/Fault Management/Connectivity Verification/End to End Loopback
- 4 M Plane/Fault Management/Connectivity Verification/UNI Loopback
Fully automated stimulus-response test suite
Flexible test case selection translates into either exhaustive testing or tailoring test case selection to suit the implementation
Flexible data recording and playback capabilities built-in to the interface's trace window
Clear verdict assignments for each test case run (such as PASS or FAIL)
Test repeatability achieved by saving test session setups and results
Test campaigns easily configured via interactive True/False or value setting questions for most PICS, PIXIT and other types of statements
Comprehensive multi-level online help available

[ Ordering ]

HP E7830A ATM Forum UNI 3.1 ATM Layer Conformance Test Suite for Intermediate Systems

All orders include the following:

ETS (on CD-ROM).
ETS User's Guide.
ATS Manual.
Release Notice.
Test Manager GUI (on CD-ROM).
Test Manager User's Guide.
Test Manager Release Notice.
Hardware key.

Requirements:
Base system requirement: HP E4200A/B HP Broadband Series Test System Form 7 Transportable Base or HP E4210A/B HP Broadband Series Test System Form 13 Mainframe Base and: 2 HP E4209A/B Cell Protocol Processor 2 compatible HP Broadband Series Test System Line Interface (LIF) HP E4214A/B UNI Signalling Test Application

[ Key Literature ]

E7830A UNI 3.1 ATM Layer ETS for Intermediate Systems

If you do not have the Adobe Acrobat Reader necessary for viewing PDF documentation, download your free Acrobat Reader now.

[ Assistance ]

To help you make the right product choices

Local Sales Office

Related product families available online:

Broadband Series Test System

Broadband/ATM