HP R11644A WR-28 Mechanical Calibration Kit, 26.5 GHz to 40 GHz

[ Summary ][ Key Literature ][ Ordering ][ Assistance ][ Related ]
The HP R11644A calibration kit contains the precision mechanical standards required to calibrate the systematic errors of the HP 8510C network analyzer system. This calibration kit has a precision 50 ohm airline for performing the Thru-Reflect-Line (TRL) calibration, the most accurate error-correction technique for coaxial measurements. This kit also contains flush short circuit, a precision shim, and a fixed termination.


[ Summary ][ Key Literature ][ Ordering ][ Assistance ][ Related ] 

HP R11644A     Mechanical Calibration Kit

[ Summary ][ Key Literature ][ Ordering ][ Assistance ][ Related ]
Additional help is a click away!

Want to talk to a knowledgeable engineer about this product at our HP Test and Measurement Call Center? Do you have a question you want to send in by e-mail? A measurement set-up you need to fax in? Follow the link above and you will be given a choice to contact an engineer by telephone, e-mail or fax.

This service is available only in the United States. For assistance outside the U.S., contact your local HP DIRECT or HP Sales Office.

Related product families available online:



Privacy Statement    Use of this site indicates that you accept the Terms of Use
Contact HP Test & Measurement. (c) Copyright 1994 - 1998 Hewlett-Packard Company.

Page Updated: Thursday February 25 09:00:29 UTC 1999