![]() | ||||
![]() |
HP Infinium Oscilloscopes![]()
|
This product family includes
Windows is a U.S. registered trademark of Mircosoft Corporation.
*Denotes Warranted Specifications, all others are typical. Specifications are valid after a 30-minute warm-up period, and ±10°C (models HP 54810A/15A/20A/25A) or ±5°C (HP 54845A) from software calibration temperature.
ACQUISITION | HP 54810A, 54815A, 54820A and 54825A | HP 54845A |
---|---|---|
Maximum Sample Rate Real Time: |
HP 54810A/15A: 1 GSa/s on each channel |
2 channel mode: 8 GSa/s |
Maximum Effective Sample Rate Equivalent Time: |
100 GSa/s | 500 GSa/s |
Memory Depth | 32,768 points/channel | 2 channel mode: 65,536 points 4 channel mode: 32,768 points |
Sampling Modes | ||
Real Time: | Successive single shot acquisitions | |
Equivalent Time: | Random Repetitive sampling | |
Peak Detect: | Captures and displays narrow pulses or glitches 1 ns or wider at sample rates of 250 MSa/s or less |
n/a |
VERTICAL | HP 54810A, 54815A, 54820A and 54825A | HP 54845A |
---|---|---|
Number of Channels | HP 54810A/20A: 2 (simultaneous acquisition) HP 54815A/25A: 4 (simultaneous acquisition |
4 (simultaneous acquisition) |
Analog Bandwidth (-3dB)* | 500 MHz | 50 ohm: 1.5 GHz 1M ohm: 500 MHz (with HP 1161A probe) |
Real Time Bandwidth* | HP 54810A/15A: 250 MHz HP 54815A/25A: 500 MHz |
50 ohm: 1.5 GHz (2 channel mode) 1.0 GHz (4 channel mode) 1M ohm: 500 MHz |
HORIZONTAL | HP 54810A, 54815A, 54820A and 54825A | HP 54845A |
---|---|---|
Main Time Base Range | 500 ps/div to 5 s/div | 100 ps/div to 5 s/div |
Resolution | 10 ps | 2 ps |
Timebase Accuracy | 50 ppm (.005%) | 70 ppm (.007%) |
TRIGGER | HP 54810A, 54815A, 54820A and 54825A | HP 54845A |
---|---|---|
Sweep Modes | Auto, triggered, single | |
Trigger Coupling | dc, ac(7 Hz), low frequency reject (50 kHz), high frequency reject (50 kHz) | |
Trigger Modes | Edge, Glitch, Pattern, State, Delay by Time, Delay by Events, Violation (Runt, Setup/Hold Time, Pulse Width, Transition), Video, Line |
DISPLAY | HP 54810A, 54815A, 54820A and 54825A | HP 54845A |
---|---|---|
Display | 8.4 inch diagonal color active matrix LCD module incorporating amorphous silicon TFTs | |
Annotation | Up to 12 labels, with up to 100 characters each, can be inserted in the waveform display area. Labels can be saved to and recalled from image files and setup files. | |
Active Display Area | 6.73"x 5.04"(33.92 sq. in.) 171 mm x 128 mm (21,888 sq. mm) | |
Waveform Viewing Area | 4.10"x 6.25" (25.6 sq. in.) 104 mm x 159 mm (16,536 sq. mm) in full screen mode | |
Display Resolution | 640 pixels horizontally x 480 pixels vertically | |
Display Update Rate Measurement Conditions |
Real Time mode, minimum persistence display mode, triggered sweep mode, no interpolation, markers off, math off, connect the dots off, 1 channel acquisition, 50 ns/div, statistics off | |
512 pt record (2GSa/s) Waveforms/sec >1,750 Vpp Measurements/sec >65 |
512 pt record (2GSa/s) Waveforms/sec >1,950 Vpp Measurements/sec >65 |
MEASUREMENT | HP 54810A, 54815A, 54820A and 54825A | HP 54845A |
---|---|---|
Automatic Parametrics | 27 automatic measurements: Vpp, Vmin, Vmax, Vavg, Vamptd, Vbase, Vtop, Vrms, Preshoot, Overshoot, Vupper, Vmiddle, Vlower, Rise Time, Fall Time, Period, Frequency, Positive Width, Negative Width, Duty Cycle, Delta Time, Tmax, Tmin, FFT Frequency, FFT Magnitude, FFT Delta Frequency, FFT Delta Magnitude. Over HP-IB only: VTime, TVolts |
COMPUTER SYSTEM/STORAGE | HP 54810A, 54815A, 54820A and 54825A | HP 54845A |
---|---|---|
Disk Drives | 1.4 GByte internal hard drive |
I/O | HP 54810A, 54815A, 54820A and 54825A | HP 54845A |
---|---|---|
LAN | Enables data/setup file transfers and use of network printers; supports popular network operating systems including Novell NetWare, Microsoft, Banyan VINES, SCO UNIX and IBM; 10 MBPS operation that complies with IEEE 802.3 Ethernet and ISO/IEC 8802-3 Ethernet standards; TCP/IP protocol; RJ-45, BNC, and AUI connectors. | |
HP-IB | Fully programmable, complies with IEEE 488.2 | |
RS-232 (serial) | 2 ports: COM1, COM2. Printer and pointing device support | |
Centronics | Printer Support | |
Printers and Plotters | Supports all printers and plotters compatible with Microsoft® Windows 95. Includes but is not limited to HP DeskJet- and LaserJet-series printers. HP-IB devices not supported. | |
PS/2 port | For PS/2 mouse | |
Keyboard port | For optional keyboard | |
Video Output | 15 pin VGA, full color |
Probes and Accessories for HP Infinium Oscilloscopes
( PDF)
HP 54810/15/20/25/45A HP Infinium Oscilloscopes
( PDF)
If you do not have the Adobe Acrobat Reader necessary for viewing PDF documentation, download your free Acrobat Reader now. |
![]() |
HP 54810A HP Infinium Oscilloscope HP 54815A HP Infinium Oscilloscope HP 54820A HP Infinium Oscilloscope HP 54825A HP Infinium Oscilloscope HP 54845A HP Infinium Oscilloscope All the above models include: 1 C3751-60201 PS-2 Mouse 1 54810-85901 Infinium Mouse pad 1 54810-97000 User's Quick Start Guide, English language 1 54845-99000 Service Guide 1 54810-99000 Programmer s Guide 1 54810-97002 Programmer s Quick Reference Guide 2 1160A 10:1 10 M ohm passive probes (54810A, 54820A) 4 1160A 10:1 10 M ohm passive probes (54815A, 54825A) 4 1161A 10:1 10 M ohm passive probes (54845A) 1 54810-68701 Accessory Pouch Options Opt 090 Delete standard probes 2 1160A probes for the 54810A/20A 4 1160A probes for the 54715A/25A 4 1161A probes for the 54845A Opt 001* Additional standard probes 2 1160A probes for the 54810A/15A/20A/25A 2 1161A probes for the 54845A Opt 002* Add 1 1162A 1:1 passive probe Opt 003* Add 1 1163A 10:1 500 ohm, low C passive probe Opt 006* Add 1 1152A 2.5 GHz, .6 pF active probe (for HP 54845A) Opt 008* Add 1 1153A 200 MHz differential probe Opt 1BP Mil Std 45662A and ANSI/NCSL Z-540 calibration with test data Opt 1CL* Add 1 Keyboard (E2610A) Opt 1CM* Add 1 Rackmount kit (E2609A) Opt UL3* Add 1 Clip-on track ball pointing device (E2611A) Opt UL5* Add 1 Touchpad pointing device (E2612A) Opt W50 Five-year, customer-return, repair coverage (additional 2 years) * Multiple options can be ordered
Additional Probes
Probes listed above as options can also be ordered by model numbers. HP 1144A 800 MHz Active Probe (requires HP 1142A power supply) HP 01144-61604 Probe power extender (required when using more than 2 HP 1144A active probes) HP 1145A 2-channel, 750 MHz SMT active probe (requires HP 1142A power supply) HP 1146A Oscilloscope AC/DC Current Probe HP 1137A 5kV, 100:1 High Voltage ProbeAccessories
HP 1182A Testmobile HP-IB cables HP 10833A 1 m (3.3 ft.) HP 10833B 2 m (6.6 ft.) HP 10833C 4 m (13.2 ft.) HP 10833D 0.5 m (1.6 ft.) Centronics Printer cable C2951A 3 m (9.9 ft.)
Additional help is a click away!
Want to talk to a knowledgeable engineer about this product at our HP Test and Measurement Call Center? Do you have a question you want to send in by e-mail? A measurement set-up you need to fax in? Follow the link above and you will be given a choice to contact an engineer by telephone, e-mail or fax.
This service is available only in the United States. For assistance outside the U.S., contact your local HP DIRECT or HP Sales Office.
Related Information:
HP Probes and Accessories for HP Infinium Oscilloscopes A complete set of technical information on probing and connection accessories for the HP Infinium oscilloscope.
Related product groups available online:
Page Updated: Friday February 12 08:42:35 UTC 1999