![]() | ||||
![]() |
VXI Digitizers![]()
|
Compared to scanning A/Ds with high absolute accuracy at DC, digitizers are optimized for relative measurements throughout the frequency range and across channels. Because waveform digitizers convert rapidly changing (or high-frequency) signals compared to scanning A/Ds, sample rates are higher, and they usually have a separate A/D for each channel, which greatly increases the cost-per-channel. The resolution of waveform digitizers is usually less than that ofscanning A/Ds for reasons of economy and application.
This product family includes
HP E1432A HP E1437A HP E1431A HP E1429A/B HP E1430A(5) Rate- Sa/s 16x51,200 20 M 8x65,536 2x20 M Bits 16 23 16 12 Signal BW 23 kHz 8 MHz 8x25.6 kHz(1) 2x50 MHz(2) Memory 4 to 32 MBytes 4 MSa 8x16 kSa 512 kSa/ch Arm, Trigger Arm enables Arm enables Arm enables Arm enables trigger state; trigger state; trigger state; trigger state; trigger initiates trigger initiates trigger initiates trigger measurement measurement measurement initiates measurement Sources Input Source TTLtrg Input Channel TTLtrg External VXI ECLtrg Triggering ECLtrg TTL TRG RPM(4) External Level External Level Timebase Alias protected Digital Filter Digital filter 0.05 Hz to bandwidths of spans of spans of 20M Hz; 10 Hz to 23 kHz, 8 MHz to 25.6 KHz to dual rate or sample rates 0.48 Hz to 0.39 Hz in of 25.6 Sa/s of achieve 1.2 Sa/s 2x steps. 1.0 Sa/s to to 20 MSa/s; Corresponding 51.2 k Sa/s alias protected 65,536 Hz to regardless of 1 Hz sample sample rate rates are alias protected regardless of sample rate Signal 16 differential 1 channel; 8 differential 2 channels; Conditioning channels; 1 MOhm; 50 Ohm 8 MHz channels; 50 and 75 100 mV to 20 V anti-alias 1 MOhm, 10 V to single-ended; ranges; AC/DC protected 5 mV ranges; 1 MOhm Coupling; ICP; regardless of ICP power; differential; microphone sample rate AC/DC coupling; 0.1 to 1 V power; programmable single-ended; programmable digital anti- 0.1 to 100 V digital anti- alias filters; differential aliasing filters; simultaneous 10 MHz, 2 pole simultaneous sample and Bessel filter sample and hold hold Programming C Libraries Register-based; Register-based; Message-based; SCPI commands SCPI commands SCPI; HP VEE with with HP E1405/6A; HP E1405/6A; HP VEE; HP VEE; C libraries(3) C libraries(3) VXI Slots C-1 C-1 C-1 C-1 (1) with internal anti-alias filter (2) 1 V range single-ended input, filter off (3) HP-UX only (4) Option AYF Tachometer Input required (5) The HP E1430A is a 10 MSa/s version of the HP E1437A with a 4 MHz maximum bandwidth
HP E1429B 20MSa/s Digitizer Technical Specifications
HP E1431A Technical Specifications
HP E1432A Technical Specifications
HP E1433A Technical Specifications
HP E1437A Technical Specifications
If you do not have the Adobe Acrobat Reader necessary for viewing PDF documentation, download your free Acrobat Reader now. |
![]() |
HP E1429A 20 MSa/s Digitizer HP E1429B 20 MSa/s Digitizer with Local Bus HP E1430A 10 MSa/s Digitizer with DSP HP E1431A 8-Channel 25.6kHz Digitizer HP E1432A 16-Channel 51.2kSa/s Digitizer plus DSP HP E1437A 20 MSa/s Digitizer with DSP Refer to detailed descriptions and ordering information for these products on pages located at this web site.
Page Updated: Monday October 05 18:46:25 UTC 1998