A Tutorial For Cracking:

Nokia Startup Logo Editor v1.0A & Nokia Smart Messaging Agent v0.99B

Author: The_Libran [C4A]

OK folks I have never written a tutorial before I never would have written one but for the insistence of
Mr.Fanatic [Founder Of C4a].... So here I am writing a tutorial for Nokia Startup Logo Editor v1.0A
A) Nokia Startup Logo Editor v1.0A

1) Tools required
2) Introduction
3) Voila you have the serial cracked!!!!

(1) The tools required:

1) Numega Smartcheck v6.03 (www.numega.com)
2) And of course !! Nokia Startup Logo Editor v1.0A (www.wildies.de/nokia)

That's all :) ...... Smartcheck is a real powerful tool for cracking VB programs ... I used
softice to crack VB programs before Smartcheck and believe me it wuz one hell of a nightmare...
which always succeeded :) ... Anyway That's all you will be needing

(2) Introduction:

To crack any program you require basic knowledge of programming. If you already know a bit of
programming it will help you to develop cracking skills faster. This tut doesn't require you to
know much of programming anyway :). If you would like to learn cracking the best way is through
tutorials a lotto which you can find at www.corleone.net . Cracking this program wont be difficult
for you if you have already done some VB programming .So lets start ...Go to the program folder of
Nokia and right click on the Nokia executable file and view it with Quick-view plus (www.inso.com).
You will see that there under the import table section there is a reference to msvbvm6.dll, which
tells us that we can use Smartcheck for cracking it .. that's the way you check to see which files
are used by the program you can also do this with WDASM32 (Windows Disassembler) u can get it at
--> ( www.corleone.net ).

(3) Serial-trapping begins:

1) Start Numega Smartcheck and load the program Nokia Startup Logo Editor
2) Now run the program by clicking Program > Start or by clicking the greesn button on the toolbar
3) Let the program load. After its finished loading click on Help>Register
4) I have entered this info in the box that pops up
Username: The_Libran [C4A]
Serial: 1234567890
License: 1111111111
5) Now Click OK
6) Then click on the Smartcheck window and locate "Toolbox_Toolclick"
7) Click on "Toolbox_Toolclick" to expand it, locate "frmregister.show"
8) Click on "frmregister.show" to expand it, locate "cmdOk.click" and expand it
9) Scroll down till you see the following in the window:

10) What is that code??? Is that what's on ur mind right now ... Is it the license key ???
11) Yes it is :). Note down this number and go back to the Nokia Startup Logo Editor, click Help>Register
in the toolbar and enter the code you just found.
12) Press OK ...... No message saying you have registered successfully???
13) OK now click Help>About on the toolbar and you can see that its still unregistered??????
14) OK OK don't get angry and delete this tutorial I will explain what s gone wrong here :)
15) Go back to where you had found the number, and click on "Left" i.e. is just above
"Len returns long: 28". I wont go into much detail here, will just explain what the Left
function does here. Now just look in the debug window i.e. the right window frame and you
will see that Left function seeks a long length of 30 characters, but our number is only
28 characters long???
16) If you scroll through the other functions before calculation of your Key you will find that
the Key is generated using your Name and Serial. If you have already done some programming
it will help you here. I have found it out here for you that the serial number should be
greater than 13 characters to get the correct serial and also the key should include at
least one "-" in between these characters.
17) Ok so lets proceed now
18) Enter the following info in the registration box:
Username: The_Libran [C4A]
Serial: 11111-11111-11111-11111-11111
License: 1111111111
19) Press OK ... now again locate "toolbox_toolclick","frmregister_show","cmdok_click".
20) Scroll down as before till you reach the following code:

21) Now you can see that the code here is 30 characters long, same as required by us :)
22) So now note down this code and enter it in the Registration Box and now click about
Do you see Licensed to: The_Libran [C4A] <-- if you have entered same info.
Serial: 11111-11111-11111-11111-11111
If not then you must have missed on some character in the 30 characters code :)

B) Nokia Smart Messaging Agent v0.99B:

1) Follow same steps as in the Nokia Startup Logo Editor and get the serial for this
One too :)

(4) Last Words:

There's a quote in the world of Cracking:
"If you provide a person with a crack he will be hungry for more so instead teach him to
Crack and make cracks for himself"

But not everyone has the time to write tutorials, especially me cuz I am busy with my
work. But if I get a good response for this Tutorial I promise more tuts :)

My regards fly out to,
Mr.Fanatic, Astaga and all C4A members

You can contact me at zeynab@hotmail.com.