language tranlation

[gokilaravee]

Hi,

Any one can translate this below to ENGLISH..PLS

NASIL YÜKLENÝR (UMARIM BUNDAN SONRA KÝMSE SORMAZ)
Bilgisayarýmýzda bir sanal sürücü olmasýnda fayda var deamontools yada alcohol kullanabilirsiniz. Þayet bunla uðraþamam derseniz "Wilcom2006Multi.CD2.with.SP2.embroidery" klasörü içerisindeki iso dosyasýný nero ile cdye yazdýrýnýz.
1- indirdiðimiz "Wilcom_ES2006_Multilanguage_CD1_CD2".rar dosyasýný masaüstüne açýyoruz...

2- Açtýðýmýz klasör içerisinde "Wilcom2006Multi.CD1.embroidery" ve "Wilcom2006Multi.CD2.with.SP2.embroidery" adlý iki klasör daha var.

3- "Wilcom2006Multi.CD1.embroidery" adlý klasöre girip "setup.exe" týklýyoruz kurulum yapýyoruz karþýmýza cd2yi takýn gibi bir ibare geliyor ilk baþta anlattýðým gibi yazdýrdýðýnýz yada sanal sürücüye koyduðunuz "Wilcom2006Multi.CD2.with.SP2.embroiderydonkers" cdsinin yerini gösterip kurulumu tamamlayýp sonra bilgisayarý yeniden baþlatýyoruz. Açýlýþta usb kilidi takýn diyecek tamam diyip geçin.

4- Bilgisayarýnýz açýldýktan sonra sýra ile baþlat->çalýþtýr->" services.msc " yazýp etner tuþuna basýyoruz (týrnak iþaretleri olmayacak).

5- Karþýmýza gelen hizmet yönetiminden SQLSERVERAGENT ve MSSQLSERVER bulun üzerine týklayýp baþlangýç türünü devre dýþý seçiyoruz ve kapatýyoruz.

6- Tekrar sýra ile baþlat->çalýþtýr->"msconfig" (týrnakk iþaretleri olmayacak) yazýyoruz baþlangýç’a geliyoruz Service Manager (SQLMANGR.EXE) karþýsýnda ki tiki kaldýrýyoruz tamam kapat diyoruz bilgisayarý yeniden baþlatayým mý diye soruyor baþlatmadan çýk yazan butona basýyoruz.

7- herhangi bir"Wilcom2006Multi.CD2.with.SP2.embroidery" yazan klasöre gidiyoruz ve her "WilcomESServicePack2.exe" týklýyoruz kurulum yapýyoruz. Bilgisayarý yeniden baþlat yazýyor tamam diyor yeniden baþlatýyoruz. Bilgisayar takýlabilir uzun süre windows kapatýlýyor yazarsa bilgisayarýn açma tuþuna basýlý tutup kapatýn(reset yapmayýn).Bilgisayar baþlayýnca usb kilidi takýn diyecek tamam ok tamam diyip çýkýn.

8- "Wilcom2006Multi.CD1.embroidery" klasörü içerisinde "[crack]" yazan klasöre girin.

9- "Serial Reader" yazan klasöre girin ve “Serial Reader.exe” týklayýn. Karþýmýza gelen ekranda "Install Emulator" yazan butona týklayýn 5-10 sn bekleyin ve "Get & Save LockIDs" yazan butona basýn. Karþýmýza nereye kayýt yapacaðýný soran bir ekran gelecek masaüstünü seçip dosya adýna LOCK yazýp tamam diyin. 5-10 sn bekleyin "Uninstall Emulator" yazan butona basýn (uyarý mesajý çýkarsa tamam diyin tekrar basýn tekrar uyarý verirse tamam diyin ve tekrar basýn) pencereyi kapatýn.

10- "Serial Reader" klasörü içerisindeki uninstall.reg dosyasýna týklayýn tamam tamam diyip çýkýn.

11- "Wilcom2006Multi.CD1.embroidery" klasörü içerisinde "[crack]" klasörü altýndaki "Keygen" yazan klasöre girin "TOROActivatorGenerator.exe" týlayýn. "Generate for Wilcom 2006" yazan butona basýn ve masaüstündeki LOCK. ID dosyasýný seçin tamam diyin ardýndan size “TORO_57FD245C.hasp” dosyasýný nereye kaydedeceðini sorun bir ekran gelecek dosyayý C:\WINDOWS\SYSTEM32 seçip tamam diyin. Ýþlem 1-10dk arasý sürebilir. Ýþlem 100% olunca pencereyi kapatýn.

12- "Wilcom2006Multi.CD1.embroidery" klasörü içerisinde "[crack]" klasörü altýndaki "Crack" klasörüne girin.

13- "1 VirtualHaspUsb" klasörüne girip wilcom.reg týklayýp tamam, tamam diyin ardýndan “install.exe” týklayýn ve bekleyin yeni aygýt bulacak “aladdin hasp” yükleyecek. Aygýt kuruldu ve kullanýma hazýr yazana kadar bekleyin.

14- Sonra "2 UsbFilter" yazan klasöre gidin ve "UsbFilter_Install.inf" üzerine sað tuþ ile týklayýn yükle diyin. Yeniden baþlatma isteyecek tamam diyip yeniden baþlatýn.
NOT: Bilgisayar açýlmasý yavaþlayabilir bunun nedeni yapýlan crack iþlemi deðil programýn hasp kilidini kontrol etmesidir. Masaüstündeki "Wilcom ES Designer 2006" týkladýðýnýzda açýlmasý biraz zaman alýr bunun nedeni de hasp kilididir. Ancak sorunsuz çalýþýr. Aslýnda bu yazdýklarým programý crack grup tarafýndan Ýngilizce olarak yazýlmýþ durumda ancak Ýngilizce bilmeyen arkadaþlar için açýklayýcý þekilde anlattým umarým iþinize yarar.

[asus]

That's instruction to help you to use TORO's emulator for Wilcom 2006 with ServicePack 2 upgrading.

[gokilaravee]

I need this thing in english..

Pls help me out

[asus]

I need this thing in english..

Pls help me out

Come here http://translate.google.com

[gokilaravee]

this is in turkish language.There is no translators avail for this ..

[asus]

this is in turkish language.There is no translators avail for this ..

Go to this place:

http://translation.babylon.com/Turkish/to-English

[kodyazan]

Hi,
...
Aslýnda bu yazdýklarým programý crack grup tarafýndan Ýngilizce olarak yazýlmýþ durumda ancak Ýngilizce bilmeyen arkadaþlar için açýklayýcý þekilde anlattým umarým iþinize yarar.

Too long to translate .. here is last two sentences:
"
....
The things I wrote is already written in English by the crack team. But I explained it ın detail for the friends who don't know english."

[TORO]

ha ha :D
i wrote it in English originally.

[bolota]

WILCOM 2006 With SP2 INSTALL
============================


1. Install WILCOM 2006 (Wilcom 2006+crack_emulator\Wilcom2006 WORK\Setup.exe), you have to reboot
and upon startup it asks you to install your red usb dongle, just vlivk 'Cancel' then 'exit' from this.

2. Now install SERVICE PACK 2 (Wilcom 2006+crack_emulator\Wilcom 2006 SP2\Wilcom 2006 SP2\WilcomESServicePack2.exe)
and reboot as required.

3. Go To 'VIRTUALHASPUSB' FOLDER AND FIRST RUN 'WILCOM.REG' AND THEN 'INSTALL.BAT'
(WHEN RUN 'INSTALL.BAT' NEW HARDWARE INSTALLATION FOR HASP USB KEY WILL START, just click 'ok'.

4. AFTER FINISH HASP KEY GO TO 'USBFILTER' FOLDER AND RIGHT CLICK ON 'USBFILTER_INSTALL.INF' AND CLICK INSTALL
(IT WILL ASK YOU TO RESTART YOUR COMPUTER AND DO SO)

5. go to 'Serial Reader' Folder


6. First Run 'Serial Reader.exe' and click on 'install Emulator' button.


7. After that click on 'Get & Save Lock IDs' File.


8. It will ask you to save the file.


9. Save it naming it 'Lock.ID'. I just saved it to the desktop, anywhere will do.


10. Now Close the 'Serial Reader.exe' and run the 'uninstall.reg' to uninstall emulator.


11. Go to 'Keygen' folder


12. run 'TOROActivatorGenerator.exe' and click the 'Generate for Wilxom 2006' button
It will ask for the 'Lock.ID' file you just created in step 9. The 'Browse for Folder' window pops up, I let
it go to Desktop again. It takes a while to do its magic. But it will create a file called 'TORO_57FD245C.hasp'


13. COPY/move the file 'TORO_57FD245C.hasp' just created TO C:\WINDOWS\SYSTEM32


14. RUN WILCOM 2006 ...ENJOY


(NOTE: WILCOM WILL ONLY WORK ON THE PC THAT HAS GENERATED SERIAL FOR)
(Note: This only Tested successfully for WinXP Pro SP2, wouldn't work on Vista)

somewhere in the net ;)

[gokilaravee]

Thanks a lot....

[gokilaravee]

Now everything is over..Software is working fine..but when I am using any option.it is showing memory is not enough to use this option.

Can anyone help me out..

[TORO]

just go to my emulator utility and press uninstall

[doubtful]

HOW IT'S INSTALL
Mount it Deamontools or alcohol or burn "Wilcom2006Multi.CD2.with.SP2.embroidery" with nero.
1- Extract downloaded "Wilcom_ES2006_Multilanguage_CD1_CD2".rar to desktop

2- There are 2 folders in the extracted folder
"Wilcom2006Multi.CD1.embroidery" and
"Wilcom2006Multi.CD2.with.SP2.embroidery"

3- Go to "Wilcom2006Multi.CD1.embroidery" folder and click "setup.exe" and start installation. put "Wilcom2006Multi.CD2.with.SP2.embroiderydonker s" cd when need it. Restart computer after installation and when asking usb key in startup click ok. [i think, it means cancel]

4- After restarting go to Start->Run and type "services.msc" and press enter. (without quotas)

5- For SQLSERVERAGENT and MSSQLSERVER services, select disabled for startup type.

6- Go to Start->Run and type msconfig and press enter. Select startup in configuration utility and uncheck SQLMANGR.exe, close the utility (Don't restart yet).

7- Go to "Wilcom2006Multi.CD2.with.SP2.embroidery" folder and click "WilcomESServicePack2.exe" and start installation. Restart computer after installation and when asking usb key in startup click ok. (If computer freeze in restart process hold down power button don't press restart button).

8- Go to "[crack]" folder in "Wilcom2006Multi.CD1.embroidery"

9- Go to "Serial Reader" folder and launch “Serial Reader.exe". Click "Install Emulator" button, wait 5-10 secs. and click "Get & Save LockIDs" button. When asked, choose desktop folder and use "LOCK" for file name, wait 5-10 secs and click "Uninstall Emulator" button (if you see any error message click "Uninstall Emulator" button again and again).

10- Double click uninstall.reg file in "Serial Reader" folder and complete uninstallation.

11- Go to Keygen folder in "[crack]" folder and launch "TOROActivatorGenerator.exe". Click "Generate for Wilcom 2006" button and select LOCK.ID from desktop. When asked select C:\WINDOWS\SYSTEM32 folder for “TORO_57FD245C.hasp” file. Wait 1-10 mins for completing.

12- Go to "Crack" folder in "[crack]" folder.

13- Go to "1 VirtualHaspUsb" folder and double click wilcom.reg (click "ok" to complete) then click "install.exe". Windows will find "aladdin hasp" device and wait for "device ready for usage" message.

14- Go to "2 UsbFilter" folder and press right click on "UsbFilter_Install.inf" file and select "install". When asked select restart.

NOT: Windows startup times can be increase due to hasp dongle search, it's not relationship with crack operation. Wait after launching "Wilcom ES Designer 2006" application due to hasp dongle search but application works wihout any problem. Actually this progress explained in english by crack group but i translated for who don't know english. I hope it's works for you.