MultiKey V18.0.1

[Git]

I don' think anybody mentioned it last week, but MultiKey V18.0.1 has been released. The Sentinel 64 bit problem has been fixed and Hardlock HL_CALC function is now supported.

Remove the .zip from each filename to leave a normal multipart rar arcive.

Git

[gus]

thanks ;)

test

[Trit0n]

Not up to Date: New Release: V 18.0.2 (22.03.09):)

[Ernestine]

Thanks for share. :)

[Trit0n]

New in this Release:

+ Added
- Corrected
! Changed

0.18.0.2 (22.03.2009)
+ Guardant: added entry in the registry with entries in the key.
! in the name of a registry key using a password to read the key.


0.18.0.1 (20.03.2009) (alfa test build)
+ Emulation keys Guardant Fidus (?), Stelth I, Stelth II (old revision);
! changed the internal algorithm haspHL (encrypt / decrypt) using AES;

[alphasxb]

thanks you for your shares!

[diegotorres]

Thank you for sharing Trit0n,

After you install version 18.0.1 and version 18.0.2 I have a problem with the driver in XP64 bit,

"Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)" :eek:

This never happened to me earlier.
Any idea is welcome. Thank you very much.

Regars,

Diego

[benito]

If newer doesnt work use older which work.
New version are useful only if you need Guardant support and it is not much used key...

[diegotorres]

If newer doesnt work use older which work.
New version are useful only if you need Guardant support and it is not much used key...


Thank you very much for your reply Benito,

The problem is that the previous version has a problem for sentinel x64 bit, and say that this new version corrected this problem, for this reason you need to use the new version. Thank you.

Regards,

Diego

[benito]

And you had this problem? I not ;)
I think some problem was in v0.16 but not in 0.17

[smithjsmi]

And you had this problem? I not ;)
I think some problem was in v0.16 but not in 0.17
This is not full, 0.17, 0.171, 0.181 and 0.182 all is not support the rus code decrtyp 32 bytes pairs. but some imporvment in (Encrypt Pairs).

[Git]

CAn you rephrase that please, it makes no sense at all.

Git

[diden]

New in this Release:

+ Added
- Corrected
! Changed

0.18.0.2 (22.03.2009)
+ Guardant: added entry in the registry with entries in the key.
! in the name of a registry key using a password to read the key.


0.18.0.1 (20.03.2009) (alfa test build)
+ Emulation keys Guardant Fidus (?), Stelth I, Stelth II (old revision);
! changed the internal algorithm haspHL (encrypt / decrypt) using AES;

both not working with dumped sentinel key , but he work well with V017
thanks

[BfoX]

This is not full, 0.17, 0.171, 0.181 and 0.182 all is not support the rus code decrtyp 32 bytes pairs. but some imporvment in (Encrypt Pairs).


RUS options is simply part of dongle memory... you can read/write it but not decrypt by emulator.

[+bagigios]

devcon.exe in "x64" dir seems wrong version (it's a 32 bit version :confused: ) and doesn't work in x64 systems.
I've tried to replace the actual release 18.0.2 x64 devcon.exe with the "old" devcon.exe (version 17.0.0 x64) but it could not retrieve drivers in multikey.sys so nothing will be installed then no emulation is made.

[Git]

Latest 64bit Devcon.exe is available here.

Git

[+bagigios]

the devcon.exe in the "here" attached files Multikey 18.0.1 and 18.0.2 are the same and are all 32bit version.
Also in the x64 dir there's a 32bit devcon.exe

The devcon.exe found in x64 dir of old Multikey 17.0.0 is a good x64, but it does not work with the latest x64 multikey.sys (v18.0.2 and v18.0.1).

If there's another version of x64 devcon.exe that works with last multikey please attach it in this thread.

thanks

[smithjsmi]

CAn you rephrase that please, it makes no sense at all.

Git

This Type of Pairs Not support this emulator.

2008/07/15 05:54:48.109 <== HaspHL_decrypt: Pass1 = 0x608D (24717), Pass2 = 0x2C50 (11344)

2008/07/15 05:54:48.109 <== HaspHL_decrypt: Length = 0x20

2008/07/15 05:54:48.109 <== HaspHL_decrypt: Input Data =

2008/07/15 05:54:48.125

A9 46 8D F1 | EB 2E BE 65 | 29 77 0E 78 | F2 E1 62 BC [.F.....e)w.x..b.]

3D 6B E0 67 | 11 71 DF 94 | CB B2 68 15 | 8D 0C B0 76 [=k.g.q....h....v]



2008/07/15 05:54:48.171 ==> HaspHL_decrypt: Output Data =

2008/07/15 05:54:48.171

9B DA 4B 33 | 5F F1 6C 25 | DC 7D 4C 33 | 01 00 DC 7D [..K3_.l%.}L3...}]

82 7B 61 F1 | 86 84 F1 8D | E6 33 FB CC | 3A 2C 26 22 [.{a......3..:,&"]



2008/07/15 05:54:48.171 ==> HaspHL_decrypt: Status = 0x00

================================================== ================

2008/07/15 05:54:48.234 <== HaspHL_decrypt: Pass1 = 0x608D (24717), Pass2 = 0x2C50 (11344)

2008/07/15 05:54:48.234 <== HaspHL_decrypt: Length = 0x20

2008/07/15 05:54:48.234 <== HaspHL_decrypt: Input Data =

2008/07/15 05:54:48.234

D3 94 B9 CE | ED 17 E0 A4 | 25 28 49 92 | 47 D0 CF F4 [........%(I.G...]

38 76 99 06 | 19 74 51 BA | 84 4A C8 45 | 3D A0 79 09 [8v...tQ..J.E=.y.]



2008/07/15 05:54:48.296 ==> HaspHL_decrypt: Output Data =

2008/07/15 05:54:48.296

92 3E 73 17 | B1 BC 75 C1 | 3F F7 74 17 | 01 00 3F F7 [.>s...u.?.t...?.]

31 F9 B3 BC | D7 06 91 C5 | C8 44 1B 9C | 37 89 C5 13 [1........D..7...]



2008/07/15 05:54:48.296 ==> HaspHL_decrypt: Status = 0x00

================================================== ================


2008/07/15 05:54:48.359 <== HaspHL_decrypt: Pass1 = 0x608D (24717), Pass2 = 0x2C50 (11344)

2008/07/15 05:54:48.359 <== HaspHL_decrypt: Length = 0x20

2008/07/15 05:54:48.359 <== HaspHL_decrypt: Input Data =

2008/07/15 05:54:48.359

5E 71 1C CA | B5 72 9D 7A | A3 9F 68 BA | CF 5A 67 F5 [^q...r.z..h..Zg.]

BA 94 8B AF | 21 A8 9C C4 | 39 DE 59 CF | B9 07 47 F1 [....!...9.Y...G.]



2008/07/15 05:54:48.421 ==> HaspHL_decrypt: Output Data =

2008/07/15 05:54:48.421

92 20 30 EC | E1 E5 75 DF | EB 9D 31 EC | 01 00 EB 9D [. 0...u...1.....]

B5 D0 E3 E5 | 53 2F AD B3 | 34 09 6F C4 | 12 3C DE 62 [....S/..4.o..<.b]



2008/07/15 05:54:48.421 ==> HaspHL_decrypt: Status = 0x00

[Chrishel]

I grabbed this version of devcon off the windows driver kit cd a while back. It installed all the versions of MultiKey posted here on Vista 64-bit fine (although 0.18.0.1 and 0.18.0.2 don't actually function for me).

http://rapidshare.com/files/215029834/devcon-x64.zip

[smithjsmi]

I grabbed this version of devcon off the windows driver kit cd a while back. It installed all the versions of MultiKey posted here on Vista 64-bit fine (although 0.18.0.1 and 0.18.0.2 don't actually function for me).

http://rapidshare.com/files/215029834/devcon-x64.zip
above I tell for some companies higherly protected the application, and use full option of hasphl protection with code. MK 17 to 18 is good working with hasphl.

[Creator]

can anyone make cat file for multikey.sys ver. 0.18.0.2?

[plan.cao]

I've downloaded the multikey 18.0.1
but it doesn't work under vista

-I installed driver's key
-run in safemode
-multikey 64/install.bat

-> It writes devcon failed

I also tried with devcon64 by replacing the devcon.exe in multikey 64
and then it worked drivers sucessfully installed
but when I look on device manager Vista says me that he could not load the driver because he is corrupted same problem than diegotores http://www.reteam.org/board/attachment.php?attachmentid=113&d=1238082991

[Creator]

I also tried with devcon64 by replacing the devcon.exe in multikey 64
and then it worked drivers sucessfully installed
but when I look on device manager Vista says me that he could not load the driver because he is corrupted same problem than diegotores http://www.reteam.org/board/attachment.php?attachmentid=113&d=1238082991

multikey drivers did not signed, so you have two ways on Vista x64:

1. Make your own signature;
2. F8 on every start, "do not check drivers signature"

I can make proper signature, if someone helps me to create cat file for driver...

[Klopschik]

Driver Signing:

http://www.nvnews.net/vbulletin/showthread.php?t=96785

[kooolguy]

Tried Multikey 18.0.2 with Hardlock & it works like a charm. Thanks to the developers :)

[Klopschik]

...all vUsb versions doesn't work with nemetschek prog. Any hints?

[benito]

I think Nemetschek no more use Hardlock as protection, or you are talking about older versions?

[Klopschik]

customer can choose hardlock or softlock.

[Trit0n]

Do you have MultiKey Gamebit-Release also tested?

[Klopschik]

Yes, but doesn't work also. Funny, refkey - verifykey are correct and the same as with original hardlock.

Safekey hardlock.sys works, but i wish to get multikey working.

[Tenglang]

Driver Signing:

http://www.nvnews.net/vbulletin/showthread.php?t=96785


thanks for your sharing:p

[william99]

anyone kind enough to lead me how to use this multi key. i already got the dump file and the reg. but it didnt working. btw its for hasp m1


edit: its working i got the wrong dump file. thx anyway for all of the reteam member

[Trit0n]

History

0.18.0.3 (15.04.2009)
- Fixed installation on 64 bit systems.

Remove the .zip from each filename to leave a normal multipart rar archive.

[Klopschik]

HL_Calc fixed???

[gokilaravee]

Thanks Trit0n ..it si working fine..

[mrcdcn]

Do you plan add dallas ibutton in your multikey emulator?

[kiki]

Do you plan add dallas ibutton in your multikey emulator?

correction for you the creator of MK 16/17/18 is elite not Trit0n

[BfoX]

@kik: the creator of MK project is BitGame

[everin]

History

0.18.0.3 (15.04.2009)
- Fixed installation on 64 bit systems.

Remove the .zip from each filename to leave a normal multipart rar archive.

I tested this emu feeding with my flora dump. but it failed to emulate. I think HL_CALC didn't work.

[Git]

I told him 2 versions ago how to do it so it should be working. It's working fine on my emulator.

Git

[ping3839]

History

0.18.0.3 (15.04.2009)
- Fixed installation on 64 bit systems.

Remove the .zip from each filename to leave a normal multipart rar archive.

I need it,Thanks for your sharing.

[frolito]

first of all excuse my English
multillave supports this windows vista in all its presentations:D

and thank you very much for the download

both not working with dumped sentinel key , but he work well with V017
thanks

[sataron]

@kik: the creator of MK project is BitGame
And there was it from my submission:)

[cadbob]

I'm missing something here 0.18.0.3 works fine with XP64 but with Vista X64 its not loading as it needs to be Digitally Signed. How are we getting around this now? I was hoping F8 saafe mode would work but, Nope!

[Git]

Use the Search facility Bob, this was covered about a month ago and somebody gave a URL to a good article on the sugject.

Git

[cadbob]

Hi Git,

Is this the Link you are thinking of?
Driver Signing:
http://www.nvnews.net/vbulletin/showthread.php?t=96785

or is there another way to get around it?
Thanks

[cadbob]

Certificate Maker.

Not sure thou how to get into bootloader i'm still a vista newbie

http://home.arcor.de/wrfan/files/Test.Certificate.rar

Hope this helps people

[Git]

Don't recognise the nvnews link. The arcor archive is the right one.

If you have something to add to a message, please don't comment to yourself, use the Edit button and add to your message.

Git

[cadbob]

I was trying to attach the files from the acorlink but couldnt so posted link.
But have a couple of questions.
If the certificate Signing app is freely available why was the driver not signed for Vista?

When I do figure out the instruction that came with arcor, will the driver be good for any machine with vista x64 or would I have to run this on each individual machine?

The instructions don't seem to point to the driver with the command line instruction so I dont quite get it.

[Git]

The reason he didn't sign it is probably because it costs quite a few hundred dollars minimum to get a developers certificate and it will only be granted if your details are disclosed and your reputation impeccable. Doesn't exactly go hand in hand with writing dongle emulators.

So it has to be fudged. Full fidging instructions you will find if you search here.

Git

[cadbob]

The reason he didn't sign it is probably because it costs quite a few hundred dollars minimum to get a developers certificate and it will only be granted if your details are disclosed and your reputation impeccable. Doesn't exactly go hand in hand with writing dongle emulators.

So it has to be fudged. Full fidging instructions you will find if you search here.

Git


Oh nooo, I knew that he/she could not go about it through Microsoft, but why not use Arcor to sign?

Does it not work?

I have read so many diffrent ways people have tried but have not seen the best way yet. I might be missing something along my searches. But I'm in here reading every night. Even thou some things I just dont understand I still read and read. I'm just a lowly drafter! So if you could give some hints or links would be awesome.

Thanks

[Klopschik]

Use readydriverplus http://www.citadelindustries.net/readydriverplus/index.php

This does work without problems!

[cadbob]

Use readydriverplus http://www.citadelindustries.net/readydriverplus/index.php

This does work without problems!

Thanks Klopschik, I have read that but also read people are having problems with it. Does it run with Vista 64 SP1?

[Klopschik]

...without probs on 2 different pc's (asus). Works also on win seven.

[cadbob]

Great thanks Klopschik! For the life of me I cant under stand the below instructions to sign the Multikey.sys so I wouldnt have to use driver ready. Would be nice to get some coaching from the pros!

Enable the testsigning mode in the vista boot loader:

bcdedit.exe /set TESTSIGNING ON
These instructions are for the first time you sign a driver:

1) Create the certificate:

makecert.exe -$ individual -r -pe -ss "WRFan Certificate Store" -n CN="WRFan Treibersignierung" "WRFan Treibersignierung.cer"

2) Install the certificate into the Trusted Root Certification Authorities store:

certmgr.exe /add "WRFan Treibersignierung.cer" /s /r localMachine root

or do it manually through the Certificate snap-in:

%windir%\System32\certmgr.msc

3) Sign the driver with the certificate:

signtool.exe sign /v /s "WRFan Certificate Store" /n "WRFan Treibersignierung" BT848.sys

4) Verify the signed driver validity:

signtool.exe verify /pa /v BT848.sys

5) Overwrite the original driver with the signed one and reboot your system. Changes to the vista boot loader require a reboot, if you already are in testsigning mode, you might open the device manager and re-activate the device that relies on the signed driver, then a reboot is not necessary
--------------------
For signing further drivers, repeat steps 3 + 4 + 5

[Git]

It is spelled out exactly step by step, what more could anybody do to help you. Do you want somebody to actually do it for you?

Git

[cadbob]

It is spelled out exactly step by step, what more could anybody do to help you. Do you want somebody to actually do it for you?

Git


LOL, Mind?

Sorry Couldn't resist

But seriously, I don't see where to type in Multikey.sys? I know Treibersignierung is German for driver at least I think so, so do I replace that with Multikey.sys?

From what I have gathered though it only creates a Test Certificate (Not a Hacked one) so you would still have to boot in test mode to use it. (Is that true?) If so seeing I dont cant get XP64 drivers for my laptop im stuck with Vista 64 and using my dongle! (Sucks)

Thanks

[Edison]

McAfee SecurityCenter thinks Multikey V.18.0.3 is full of virus and troyans. Should I be worried?

[Trit0n]

McAfee SecurityCenter thinks Multikey V.18.0.3 is full of virus and troyans. Should I be worried?

I don't think so:)
Test with Online Scan (http://www.virustotal.com)


File MultiKey.sys received on 05.06.2009 10:54:28 (CET)
Current status: finished

Result: 0/40 (0.00%)
Compact Print results
Antivirus Version Last Update Result
a-squared 4.0.0.101 2009.05.06 -
AhnLab-V3 5.0.0.2 2009.05.06 -
AntiVir 7.9.0.160 2009.05.06 -
Antiy-AVL 2.0.3.1 2009.05.06 -
Authentium 5.1.2.4 2009.05.06 -
Avast 4.8.1335.0 2009.05.05 -
AVG 8.5.0.327 2009.05.05 -
BitDefender 7.2 2009.05.06 -
CAT-QuickHeal 10.00 2009.05.06 -
ClamAV 0.94.1 2009.05.06 -
Comodo 1153 2009.05.06 -
DrWeb 5.0.0.12182 2009.05.06 -
eSafe 7.0.17.0 2009.05.05 -
eTrust-Vet 31.6.6490 2009.05.05 -
F-Prot 4.4.4.56 2009.05.05 -
F-Secure 8.0.14470.0 2009.05.06 -
Fortinet 3.117.0.0 2009.05.06 -
GData 19 2009.05.06 -
Ikarus T3.1.1.49.0 2009.05.06 -
K7AntiVirus 7.10.723 2009.05.05 -
Kaspersky 7.0.0.125 2009.05.06 -
McAfee 5606 2009.05.05 -
McAfee+Artemis 5606 2009.05.05 -
McAfee-GW-Edition 6.7.6 2009.05.06 -
Microsoft 1.4602 2009.05.06 -
NOD32 4055 2009.05.06 -
Norman 6.01.05 2009.05.05 -
nProtect 2009.1.8.0 2009.05.06 -
Panda 10.0.0.14 2009.05.05 -
PCTools 4.4.2.0 2009.05.05 -
Prevx1 3.0 2009.05.06 -
Rising 21.28.21.00 2009.05.06 -
Sophos 4.41.0 2009.05.06 -
Sunbelt 3.2.1858.2 2009.05.06 -
Symantec 1.4.4.12 2009.05.06 -
TheHacker 6.3.4.1.319 2009.05.05 -
TrendMicro 8.950.0.1092 2009.05.06 -
VBA32 3.12.10.4 2009.05.05 -
ViRobot 2009.5.6.1720 2009.05.06 -
VirusBuster 4.6.5.0 2009.05.05 -
Additional information
File size: 90112 bytes
MD5...: 70fe2a9d444badac5b6efaecf31e20a7
SHA1..: 67daab1ee252da8fd3e99155baa235f22fab10e7
SHA256: d29bdbdee029a963d9d358c0c9c4fbce24ea112433c36bc8fc 9eb0f498ceacf9
SHA512: e3c215f23ba70b8fc357547432f37d31e94156c3317c47946e 8fcb956425b52e
ec69ede4e6fd9fe44e946e7448d061e7bdd8bc2a0189932316 627aba00814920
ssdeep: 1536:XpICS4Ai4FmjLiL7dXDDOE+AajtdHJsh1SWBAIrykoMd9 HglZ/fF+7:i7hD
DOE+AI0Is5BnglZ/f47

PEiD..: -
TrID..: File type identification
Win32 Executable Generic (51.1%)
Win16/32 Executable Delphi generic (12.4%)
Clipper DOS Executable (12.1%)
Generic Win/DOS Executable (12.0%)
DOS Executable Generic (12.0%)
PEInfo: PE Structure information

( base data )
entrypointaddress.: 0x14956
timedatestamp.....: 0x49e5a2ec (Wed Apr 15 09:03:40 2009)
machinetype.......: 0x14c (I386)

( 6 sections )
name viradd virsiz rawdsiz ntrpy md5
.text 0x480 0x75ae 0x7600 7.01 8bc3ff37b81d2b6b727edc36b90bc900
.data 0x7a80 0x1dc 0x200 1.62 91e25fd46d9bfce20ceda292962ea36c
PAGE 0x7c80 0xcb55 0xcb80 6.46 6e841dd6f8355a5f143170a9321e0686
INIT 0x14800 0x6ba 0x700 5.68 f44e837d52531732baf114344667d780
.rsrc 0x14f00 0x3e8 0x400 3.32 e2fd057ddc171cb63ecc2f5f75553e33
.reloc 0x15300 0xcfe 0xd00 6.61 be3910a1bd573be990c5ac9231b7ac1c

( 2 imports )
> ntoskrnl.exe: DbgPrint, IofCompleteRequest, RtlAssert, IoInvalidateDeviceRelations, ExFreePool, KeClearEvent, InterlockedIncrement, KeSetEvent, InterlockedDecrement, IoGetDeviceProperty, IoAttachDeviceToDeviceStack, IoDeleteDevice, IoRegisterDeviceInterface, KeInitializeEvent, IoCreateDevice, ObfReferenceObject, IoDetachDevice, IofCallDriver, KeWaitForSingleObject, IoSetDeviceInterfaceState, KeLeaveCriticalRegion, ExAllocatePoolWithTag, IoRequestDeviceEject, PoStartNextPowerIrp, PoCallDriver, PoSetPowerState, swprintf, ObfDereferenceObject, IoBuildSynchronousFsdRequest, IoGetAttachedDeviceReference, ZwClose, ZwSetValueKey, ZwOpenKey, RtlInitUnicodeString, RtlTimeFieldsToTime, RtlTimeToTimeFields, KeQuerySystemTime, KeTickCount, ZwEnumerateKey, ZwQueryKey, ZwQueryValueKey, KeDelayExecutionThread, KeBugCheckEx, RtlCopyUnicodeString, IoGetCurrentProcess, KeEnterCriticalRegion, strncmp
> HAL.dll: ExReleaseFastMutex, KeGetCurrentIrql, ExAcquireFastMutex

( 0 exports )

PDFiD.: -
RDS...: NSRL Reference Data Set
-
packers (Kaspersky): PE_Patch

[Edison]

It is the Guardant dumper file that is the source of the problem. McAfee SecurityCenter deletes the Guardant dumper Grd2Mult.exe everytime I try to unrar it, claiming it is infected by a 'New Malware.n' Troyan...

[Trit0n]

Maybe [WinUpack]/[Upack_Patch]/[PolyEnE] signatures in the file are the problem.
if you don't trust the dumper try this:

[Trit0n]

correction for you the creator of MK 16/17/18 is elite not Trit0n

@kik: the creator of MK project is BitGame

And there was it from my submission:)

- And what about Tyrus:D


Unikey Emulator for SCAD 11.1, Ing+2006, Stark 2006, Normcad 5.4,
Lira 9.4, Monomah 4.2, PPP 3.2, OM SNiP Zhelezobeton 2.06,
Fok PK 2006, Fok PK Parus 2006, FOK PK Lenta 2004,
Paschal Plan, Euroschal 2008, StroyConsultant Prof,
Robot Office 20.0/20.1/21, 1C.Rarus.Mebelnoe predpriyatie red.2,
Sema 10.2 eXtra, APM WinMachine2008 9.5, K3-Kottedge 5.5

(C) Tyrus 2009
ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ¿
³° LAVTeam RELEASE DIVISION PROUDLY PRESENTS ... °³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Ù
Emulator for Hasp, Hardlock, Sentinel, Guardant, Eutron
28.02.2009

[darksider]

Hello,

I'm having some trouble to get this thing flying.
I got:
- Vista x64 without the driver signing check
- h5dmp
- unidmp2reg 1.15b
- multikey 0.18.0.3
- hasp hl pro dongle
- hasphl2009.exe

I used hasphl2009 to get the key1 and key2, and then dumped the dongle on a xp-machine with h5 dump.
I converted the dongle-dump using unidmp2reg into the vusb format. I then edited the reg file to match the new path of multikey (I just compared it with an appropriate example).

I added the file to the registry (yes I know there are still the q/a keys missing at this point).

I clicked install.cmd in the 64bit dir of multikey. The Virtual USB MultiKey Device shows in the device manager.

But windows does not detect any virtual dongles. Actually whenn I click restart.cmd or remove.cmd the console window just hangs.

When I reboot the machine with signed drivers only active, it does not load the multikey driver and I can remove it wthe the remove.cmd.

Does anyone know where my mistake might be?=

regards
Darky

[Git]

Dongle not showing in Device Manager is exactly what happens when a required Reg file entry is missing or incorrect. Check line by line with the example supplied with MultiKey.

I am not quite sure what you mean about the driver not loading though.

Git

[rooky2000]

Hello,

I'm having some trouble to get this thing flying.
I got:
- Vista x64 without the driver signing check
- h5dmp
- unidmp2reg 1.15b
- multikey 0.18.0.3
- hasp hl pro dongle
- hasphl2009.exe

regards
Darky

Maybe DongleType line is missing in your Reg file

[darksider]

Maybe DongleType line is missing in your Reg file

Should have mentioned it, of course I added the dongletype line with a value of "1" for hasp.

In my opinion the main problem might be the strange behaviour of the multikey emu itself. Meanwhile I tried the 32 bit version on a win32 system and got the same problem: after intstalling with install.cmd, remove.cmd and restart.cmd don't do anything, it seems like the devcon.exe hangs. The console windows just shows a blinking cursor - nothing more.

[BfoX]

try install the original hasp/hardlock drivers before multikey.

[darksider]

Hi,

there were some hasp drivers installed, since the protected app works with the original dongle. I updated the Drivers to version 5.60 from the aladdin homepage and reinstalled the multikey driver. No success so far.

I even noticed another Problem: as soon as the multikey-driver is installed all my connected usb-devices cease to function. If I plug in an USB-Memory-Device it is not recognized by Windows, the light of the HASP-Dongles won't turn on anymore. After deinstalling multikey (without the signed option on) all usb-devices again work totally normal.

Same behaviour on a XP machine.

[bolota]

- And what about Tyrus:D


Unikey Emulator for SCAD 11.1, Ing+2006, Stark 2006, Normcad 5.4,
Lira 9.4, Monomah 4.2, PPP 3.2, OM SNiP Zhelezobeton 2.06,
Fok PK 2006, Fok PK Parus 2006, FOK PK Lenta 2004,
Paschal Plan, Euroschal 2008, StroyConsultant Prof,
Robot Office 20.0/20.1/21, 1C.Rarus.Mebelnoe predpriyatie red.2,
Sema 10.2 eXtra, APM WinMachine2008 9.5, K3-Kottedge 5.5

(C) Tyrus 2009
ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ¿
³° LAVTeam RELEASE DIVISION PROUDLY PRESENTS ... °³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Ù
Emulator for Hasp, Hardlock, Sentinel, Guardant, Eutron
28.02.2009

it's possible multikey 18.0.3 emulate eutron?
Or this emulator isn't multikey.
thanks

[BfoX]

@bolota: it not hold 16-bit solutions

[chanvaidan]

Hi Git
I have problem with LPT Dongles Key you can help me.
I use dumper PVA 3.3 but it don't work with LPT key, it only work with USB Dongles Key. I have use driver SENTEMUL DRIVER new 7.5.0 but PVA 3.3 always dump with file 192 byte it don't smaller 100 bytes. I hope you can help me.
I am sorry bad english

[bolota]

@bolota: it not hold 16-bit solutions
it's bad news, I need one 16 bit solution for my old program.

for new programs,How I make the emulation?

[Thangdc]

I emulator hasp HL by v18.0.3 but have error 1031 envelope unknow error, please help me

[jmaxwell]

How To Install Sentinel Emulator on Vista x64
-------------------------------------------

1) Install ReadyDriver Plus: http://www.citadelindustries.net/readydriverplus/index.php

2) Download Multikey posted here: http://www.reteam.org/board/showpost.php?p=13121&postcount=33 and run install.cmd under /Release/MultiKey64. Next, install Sentinel.REG file under /Examples

3) Remember to reboot your machine immediately after completing #2!

If this doesn't work, then follow steps below:

3) On a different x86 (32 bit) machine, follow steps 1 & 2 posted here: http://www.reteam.org/board/showthread.php?t=662

4) Use the ssp to reg converter ver 1.11 posted at the bottom of that message in step #3 to obtain .REG from .SSP.

5) Open the REG file in Notepad or any other text editor and make the following changes:

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet
\Services\Emulator\Sentinel\Dump\XXXX0000]

To

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet
\MultiKey\Dumps\0000XXXX]

6) Use the .REG with Multikey (step #2) and reboot your machine!

Assumes:
- You have access to a 32-bit machine
- You have access to the Sentinel USB dongle

If everything was done right, you should see this:

http://imgur.com/daYgG.jpg

Hope this helps :p

[abc123ww]

Thank u very much
BR.