1 HardLock with 2 keys inside?

[yotoxionomai]

Hello guys,

Im testing a new program, which license ends in less than two weeks, for this purpose i have a violet Hardlock key.
I used HaspHL 2007/Edge to dump it, but there is a problem, the Hasp/HL dongle window shows two keys:
0000:1A48
0000:1A5C
I tryied to dump it but it only dumps the first one, and as soon as i try to load the dng file, the emulator only displays the 00001A48 as a Lincensed Dongle.
Any Ideas?

[SonofabiT]

@yotoxionomai
I assume that you only plug a single actual hardlock dongle and there aren't any active/installed hardlock emulator on you PC.

Your s/w detects two modad. Usually only one modad which will valid. You can try to dump each modad with public hardlock dumper which will generate a .dat and .reg files.

If you realy want to make sure which is the right modad, then monitor your actual dongle with Toro Hasp/Hardlock monitor.

If you still confuse, simply try to dump your hardlock with 1A48 modad and then 1A5C. If everythings ok, you should get 1a48.dat and 1a48.reg or 1a5c.dat and 1a5c.reg.

[yotoxionomai]

Already tried Toro´s monitor, install usb filter and all, but the log files still log out Zero values.
Note: While running toro´s monitor i find several references to 1A48 and 1A5C.
All "CMD" based dumpers give the following message,
"Hardlock module not found. (Error: 7)"

[SonofabiT]

If you already installed a new hardlock driver and read this post :
http://reteam.org/board/showthread.php?t=1697&page=2, but still get a problem, then we hope anyone else explain to us. :)

[yotoxionomai]

Was capable of making a dump with some brute force tool,
it generated a dat file, i then used dump2reg.
It generated two reg files:
REGEDIT4
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\Emulator\Hardlock\Dump\00001A48]
"hlkMemory"=hex:00,00,00,00,00,00,00,00,00,00,00,00,00,00,00, 00,\
...
"Seed1"=dword:00008xx7
"Seed2"=dword:0000Bxxx
"Seed3"=dword:0000xx2D
"ID"=dword:00000000
"DongleType"=dword:00000002
"withMemory"=dword:00000001

REGEDIT4
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\Emulator\Hardlock\Dump\00001A48]
"hlkMemory"=hex:00,00,00,00,00,00,00,00,00,00,00,00,00,00,00, 00,\
...
"Seed1"=dword:0000xxD1
"Seed2"=dword:00000xxD
"Seed3"=dword:0000xx2D
"ID"=dword:00000000
"DongleType"=dword:00000002
"withMemory"=dword:00000001

I also runned the dat file thru HLsolver and the results are as follow:

HL Solver
Processing...
-> Seed1=0x8xx7, Seed2=0xBxxx, Seed3=0x6xx8
-> Seed1=0xxxD1, Seed2=0xxxD, Seed3=0x6xx8

Except for the third seed the rest seems ok, still i dont understand it...how do i merge both reg files?
Do their cells need to be reversed to be used under Multikey?

[SonofabiT]

Try to use each seeds combinations which you have and follow a references given by Example directory of multikey emulator. You have 4 seeds combinations. Later you will know which is the right seeds combinations. ;)

[yotoxionomai]

Thanks sonofabiT!

The seeds in the first reg were correct, i just had to replace
seed3 by 00006xx8, and make the necessary adjustments in MK example.
All works now!:D