How about with my dump file??

[henrychen]

Dear all:
My key pro is a "Sentinel SuperPro"!

Why I use the "PVA3.3" without "Brute WP" to dump a "spro_RNBO_SPN_DRIVER_25cf_0.dmp" file, then use "dmp2mkey.exe(v2.3)" to convert it to *.reg file, and multikey can't work?

However, I use "edgespro11" to Dump & Solve, then use "SENTEMUL2007" to simulate it. It can work fine!

The below file is my key with .dng, .reg, and .dmp forms!!
http://www.badongo.com/file/17255780

Could anyone help me to solve or check it?

I need the exact .reg file to work with multikey!

Thank you very much!

[gnerogeem]

Please try these reg file. Tell me if it working.

Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\MultiK ey\Dumps\000025CF1]
"DongleType"=dword:00000003
"Copyright"="None"
"Created"="Thu Sep 17 22:46:44.640 2009"
"Name"="25CF Sentinel SuperPro Dump"
"Type"=dword:00000000
"CellType"=hex:\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00
"sntMemory"=hex:\
F7,30,CF,25,00,00,00,00,A7,78,00,00,90,1F,00,00,\
0C,76,12,EF,56,30,00,C4,75,4F,00,E8,00,00,00,06,\
00,00,00,00,00,00,00,00,00,00,00,00,F7,19,BA,93,\
00,00,00,00,00,00,00,00,00,00,00,00,96,0C,DA,90,\
00,00,00,00,A6,3B,25,B8,00,00,00,00,00,00,00,00,\
00,00,00,00,E1,F1,50,F7,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,B1,95,5B,E6,\
00,00,00,00,3C,22,13,91,00,00,00,00,00,00,00,00


For more information, you can refer to this thread.

http://www.reteam.org/board/showthread.php?t=1879

Good luck! :):):):)

[Git]

That first line of CellType is wrong, it should look like this :

"CellType"=hex:\
01,01,03,03,03,03,03,03,\

Did you change it or has dmp2mkey got a bug?

Git

[gnerogeem]

@henrychen

Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\MultiK ey\Dumps\000025CF1]
Your reg name was 25CF0000.reg. What the purpose for number 1 to be there? Is it this reg file is the original or the moded one?

[henrychen]

Dear gnerogeem & Git:
I had tried those two cases, but it still can't work!!
I really had a license.dat file with this keypro, and I can work fine with "SENTEMUL2007".
I don't know what's the exact problem!! Maybe the .dng file is correct, and the .dmp & .reg files should be correct in some places.

Dear gnerogeem:
I just only change the "25CF0000" to "000025CF1" in the .reg file!
It can work fine in my old keypros.
And I had tried to change all the 01 in CellType to 00 and try again.
But it still can't work!!

The original reg file is shown as below:
================================================== =========
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\MultiK ey\Dumps\25CF0000]
"DongleType"=dword:00000003
"Copyright"="None"
"Created"="Thu Sep 17 22:46:44.640 2009"
"Name"="25CF Sentinel SuperPro Dump"
"Type"=dword:00000000
"CellType"=hex:\
01,01,03,03,03,03,03,03,\
03,03,03,03,03,03,01,01,\
03,03,03,03,03,03,03,03,\
03,03,03,03,03,03,03,03,\
03,03,03,03,03,03,03,03,\
03,03,03,03,03,03,03,03,\
03,03,03,03,03,03,03,03,\
03,03,03,03,03,03,03,03
"sntMemory"=hex:\
F7,30,CF,25,00,00,00,00,A7,78,00,00,90,1F,00,00,\
0C,76,12,EF,56,30,00,C4,75,4F,00,E8,00,00,00,06,\
00,00,00,00,00,00,00,00,00,00,00,00,F7,19,BA,93,\
00,00,00,00,00,00,00,00,00,00,00,00,96,0C,DA,90,\
00,00,00,00,A6,3B,25,B8,00,00,00,00,00,00,00,00,\
00,00,00,00,E1,F1,50,F7,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,B1,95,5B,E6,\
00,00,00,00,3C,22,13,91,00,00,00,00,00,00,00,00

[gnerogeem]

I think you need to change all the Celltype to 00.

"CellType"=hex:\
01,01,03,03,03,03,03,03,\
03,03,03,03,03,03,01,01,\
03,03,03,03,03,03,03,03,\
03,03,03,03,03,03,03,03,\
03,03,03,03,03,03,03,03,\
03,03,03,03,03,03,03,03,\
03,03,03,03,03,03,03,03,\
03,03,03,03,03,03,03,03Change it like this.

"CellType"=hex:\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00

And not to forget after every time you import the reg file to registry,
PLEASE restart your Multikey!
Also delete the previous reg file you have (the original) before importing the new one.

[henrychen]

Dear Git:
It seems no any error message!!
============================================
C:\a>dmp2mkey spro_RNBO_SPN_DRIVER_25cf_0.dmp.dmp

Number of Query Cells = 27
0x08 0x0A 0x0C 0x10 0x12 0x14 0x16 0x18 0x1A 0x1C 0x1E 0x20 0x22 0x24 0x26 0x28
0x2A 0x2C 0x2E 0x30 0x32 0x34 0x36 0x38 0x3A 0x3C 0x3E

DevID = 0x25CF
Serial = 0x30F7
WP = 0x0000

Cell 0x08 : enhanced, sig=15962
*
Descriptor = 0xEF12760C C6 = 0x1F90

Cell 0x0A : enhanced, sig=23978
***
Descriptor = 0xC4003056 C6 = 0x1F90

Cell 0x0C : enhanced, sig=14998
********************
Descriptor = 0xE8004F75 C6 = 0x1F90

Cell 0x10 : standard, sig=0

Cell 0x10 is Inactive (no data in dump)

Cell 0x12 : standard, sig=0

Cell 0x12 is Inactive (no data in dump)

Cell 0x14 : standard, sig=0

Cell 0x14 is Inactive (no data in dump)

Cell 0x16 : standard, sig=164
-****-----------***--------------****-----------*****-----------
Descriptor = 0x93BA19F7 WP = 0x78A7

Cell 0x18 : standard, sig=0

Cell 0x18 is Inactive (no data in dump)

Cell 0x1A : standard, sig=0

Cell 0x1A is Inactive (no data in dump)

Cell 0x1C : standard, sig=0

Cell 0x1C is Inactive (no data in dump)

Cell 0x1E : standard, sig=319
-*----------------------------------------------****------------
Descriptor = 0x90DA0C96 WP = 0x78A7

Cell 0x20 : standard, sig=0

Cell 0x20 is Inactive (no data in dump)

Cell 0x22 : standard, sig=342
-*********-------********-------********---------********-------
Descriptor = 0xB8253BA6 WP = 0x78A7

Cell 0x24 : standard, sig=0

Cell 0x24 is Inactive (no data in dump)

Cell 0x26 : standard, sig=0

Cell 0x26 is Inactive (no data in dump)

Cell 0x28 : standard, sig=0

Cell 0x28 is Inactive (no data in dump)

Cell 0x2A : enhanced, sig=21885
*******
Descriptor = 0xF750F1E1 C6 = 0x1F90

Cell 0x2C : standard, sig=0

Cell 0x2C is Inactive (no data in dump)

Cell 0x2E : standard, sig=0

Cell 0x2E is Inactive (no data in dump)

Cell 0x30 : standard, sig=0

Cell 0x30 is Inactive (no data in dump)

Cell 0x32 : standard, sig=0

Cell 0x32 is Inactive (no data in dump)

Cell 0x34 : standard, sig=0

Cell 0x34 is Inactive (no data in dump)

Cell 0x36 : enhanced, sig=22046
*******
Descriptor = 0xE65B95B1 C6 = 0x1F90

Cell 0x38 : standard, sig=0

Cell 0x38 is Inactive (no data in dump)

Cell 0x3A : standard, sig=365
-*---------------*------------------------------****------------
Descriptor = 0x9113223C WP = 0x78A7

Cell 0x3C : standard, sig=0

Cell 0x3C is Inactive (no data in dump)

Cell 0x3E : standard, sig=0

Cell 0x3E is Inactive (no data in dump)

Processing time 39.422 seconds

Writing MultiKey Registry file...

C:\a>

Dear gnerogeem:
I had tried your method, and restart my PC!
However, it doesn't work!!
Could you help me to re-check from the .dng file??
Thank you very much!!

[gnerogeem]

Not necessary to restart your PC.
Just use restart.cmd from your Multikey folder.
See picture below.

http://img27.imageshack.us/img27/5995/sneap.jpg

To delete your old reg file, go to regedit and delete the reg file.
See picture.

http://img24.imageshack.us/img24/4674/asnap.jpg

To check whether Multikey detect your emulated dongle,
go to My Computer>Properties>Hardware>Device Manager.
See picture.

http://img146.imageshack.us/img146/6168/snapec.jpg

@Git

This the screen when I use dmp2mkey to change dmp to reg file.
Anything suspicious with the dump?

C:\Documents and Settings\Test\Desktop>dmp2mkey.exe spro_RNBO_SPN_DRIVER_25cf_0.
dmp

Number of Query Cells = 27
0x08 0x0A 0x0C 0x10 0x12 0x14 0x16 0x18 0x1A 0x1C 0x1E 0x20 0x22 0x24 0x26 0x28
0x2A 0x2C 0x2E 0x30 0x32 0x34 0x36 0x38 0x3A 0x3C 0x3E

DevID = 0x25CF
Serial = 0x30F7
WP = 0x0000

Cell 0x08 : enhanced, sig=15962
*
Descriptor = 0xEF12760C C6 = 0x1F90

Cell 0x0A : enhanced, sig=23978
***
Descriptor = 0xC4003056 C6 = 0x1F90

Cell 0x0C : enhanced, sig=14998
********************
Descriptor = 0xE8004F75 C6 = 0x1F90

Cell 0x10 : standard, sig=0

Cell 0x10 is Inactive (no data in dump)

Cell 0x12 : standard, sig=0

Cell 0x12 is Inactive (no data in dump)

Cell 0x14 : standard, sig=0

Cell 0x14 is Inactive (no data in dump)

Cell 0x16 : standard, sig=164
*-**------------*-**------------*****-----------*-**------------
Descriptor = 0x93BA19F7 WP = 0x78A7

Cell 0x18 : standard, sig=0

Cell 0x18 is Inactive (no data in dump)

Cell 0x1A : standard, sig=0

Cell 0x1A is Inactive (no data in dump)

Cell 0x1C : standard, sig=0

Cell 0x1C is Inactive (no data in dump)

Cell 0x1E : standard, sig=319
*---------------*---------------*---------------*---------------
Descriptor = 0x90DA0C96 WP = 0x78A7

Cell 0x20 : standard, sig=0

Cell 0x20 is Inactive (no data in dump)

Cell 0x22 : standard, sig=342
*********-------*********-------*-*******-------*--******-------
Descriptor = 0xB8253BA6 WP = 0x78A7

Cell 0x24 : standard, sig=0

Cell 0x24 is Inactive (no data in dump)

Cell 0x26 : standard, sig=0

Cell 0x26 is Inactive (no data in dump)

Cell 0x28 : standard, sig=0

Cell 0x28 is Inactive (no data in dump)

Cell 0x2A : enhanced, sig=21885
*******
Descriptor = 0xF750F1E1 C6 = 0x1F90

Cell 0x2C : standard, sig=0

Cell 0x2C is Inactive (no data in dump)

Cell 0x2E : standard, sig=0

Cell 0x2E is Inactive (no data in dump)

Cell 0x30 : standard, sig=0

Cell 0x30 is Inactive (no data in dump)

Cell 0x32 : standard, sig=0

Cell 0x32 is Inactive (no data in dump)

Cell 0x34 : standard, sig=0

Cell 0x34 is Inactive (no data in dump)

Cell 0x36 : enhanced, sig=22046
*******
Descriptor = 0xE65B95B1 C6 = 0x1F90

Cell 0x38 : standard, sig=0

Cell 0x38 is Inactive (no data in dump)

Cell 0x3A : standard, sig=365
***-------------**--------------**--------------*---------------
Descriptor = 0x9113223C WP = 0x78A7

Cell 0x3C : standard, sig=0

Cell 0x3C is Inactive (no data in dump)

Cell 0x3E : standard, sig=0

Cell 0x3E is Inactive (no data in dump)

Processing time 110.967 seconds

Writing MultiKey Registry file...

[henrychen]

@gnerogeem
I had tried your methods. However, it still can't work!!

[gnerogeem]

Hmmm..that seems weird.

BTW where can I download this software.
I wanna test it myself then.

[Git]

gnerogeem - that is nonsense, you must NOT change the CellTypes. You have just removed all the algorithms and changed the rerserved cells status. That is a seriously misleading message and you should remove it.

BTW, can you guys please stop commenting to your own messages?. If you want to add something, use the Edit butto, it is what it is there for.

Git

[gnerogeem]

Oh thanks for the info Git,
and sorry for not using Edit button.

[henrychen]

@gnerogeem
The software is CodeV (v9.82).
I can send you the software.
However, the license key is registered with my adviser's name.
Therefore, I can't give you that!
Sorry!