My experience with HASP HL Time

[besoeso]

I share my experience with you and it is the follow:

1. Software with protection:

http://rapidshare.com/files/294303955/navigator.rar

2. Tools for emulation:

-Dumpers:
a) H5dmp
b) HASP HL Dump by tyrus.

-Loger:
haSploGer 1.7 by Xyrurg + sataron

-Emulator:
Chingachguk & Denger2k + version 0.15.1.4
Multikey last version.

-Converters:
UniDumpToReg by sataron for convertion of dmp to reg
Bin2DTable by Git for covertion of bin pairs tables to emulator format.

3. Files generated:

http://rapidshare.com/files/294310991/DUMP_-_LOG_-_REGKEY-TABLES.rar (http://rapidshare.com/files/294310991/DUMP_-_LOG_-_REGKEY-TABLES.rar)

Reg key for Multikey V18.0.3 emulator: 189

Steps that i follow:

1. Dump dongle key with h5dmp. Two files generated:
hasp.dmp and hhl_mem.dmp.(I dumped with HASP HL Dump by tyrus too)

2.To convert to reg file with UniDumpToReg tool, select vusbus HL option. I used hasp.dmp and hhl_mem.dmp files.

3.I introduce in registry the reg file and run Chingachguk & Denger2k + version 0.15.1.4 emulator.

4.Run program with protection.

5.I see a message 1003 Envelope hasp hl error

6.Then, I got 2 pairs tables of executable, table1.bin and table2.bin.I use ollydump plugin of ollydbg and hexworkshop.

7.I use tool Bin2DTable for to convert .bin to format Qtable and Atable for Chingachguk & Denger2k + version 0.15.1.4 emulator and Dtable for Multikey V18.0.3 emulator.

8.I copy pairs tables Qtable and Atable to reg file for emulation.

9.I introduce in registry the reg file again with tables.

10. Remove emulator

11. Intall again emulator

12. Run the program


Note: I have tested with multikey emulator v18.03 but when i run the emulator no dongle usb key detect in S.O. win xp. and after i can´t run it again and can´t remove too. It is normal if it not working file key.

Any suggestion. You can test my files. I for now i not find the problem.

If anyone want i can upload the tools in a file.

Thank you.

[foffa]

i have seen that LOGS and passwords befor
is this a duplicate user or both users have same software
????!!!
did 流星1978 have explain ????

[besoeso]

@foffa

Yes, it is the same software. I know this user. It is my friend.

[Git]

besoeso - you say you use QTable and ATable, but V18.0.3 of MultiKey does not use that format, it uses the single line per pair DTable format :

[HKEY_LOCAL_MACHINE\System\CurrentControlSet\MultiK ey\Dumps\12345678\DTable]
"10:9D355C8DAD356FE15F82CD3AC3073410"=hex:77,12,DB,1E,29,9B,64,BC,34,41,D7,6C,F1,7F,63, DE

Git

[foffa]

@besoeso
your tabels from .exe are correct
i think more tables should be extracted from .dll files
also extracting master pairs from Pioneer.exe could help
it is not in your files !!!!!! yur other friend post logs from that exe

who have explanation for this ???
experts !!!!!!

[besoeso]

@Git
Hi Git,

You can download my reg key for Multikey V18.0.3 in this link:

http://www.reteam.org/board/attachment.php?attachmentid=189&d=1255864586

When run it. Multikey installed it but S.O. not hasp key detect. Then not work it. I have uploaded the reg key, if you want can check it.

Thanks for your response.

@foffa

Hi foffa,

Pionner is a software different because i will must to introduce this tables. Are diffente key dongles

Thanks for your response.

[Git]

foffa - they are correct table but they are not correct for later multikey which uses the new format. Note that he says it works OK with C&D 0.15.1.4 which does use that format. Or maybe I have just jumped on a typo.

Git

[besoeso]

@ Git

I think that will could to be of Hasp Time limit. The software will can want write in dongle. Emulator not support it.

Corret me if it is strong.

But i not known because multikey v18.0.3 no start fine.:confused:

[Git]

besoeso - appologies, your Q/A format is correct for multikey. Opening your reg file was like opening a picture and seeing it is an old friend :)

"Type"=dword:000000DA
this is correct for Hasp HL Time
"NetMemory"=hex:00,00,00,00,00,00,00,00,00,00,FD,FF
this is correct for all Time variants

It looks OK to me, but it is easy to miss a small typo. All it takes is one missing comma.

Ah, think I've got it :
"DongleType" = dword: 00000001
No spaces allowed. Should be :
"DongleType"=dword:00000001

Try that.

Git

[besoeso]

@Git

Ok Git, i now did run multikey emulator 18.0.3 fine but i have the same results that the emulator Chingachguk & Denger2k + version 0.15.1.4.

The results are:

When i start the software with protection nothing happen. No error messages popup and windows program not appear.:)

I have checked dll for hasp hl protection but there aren´t more.

It is a mysterius.:D

[Git]

Sometimes the best way to find these problems is to use a logger and run the program first with the dongle and then with the emulator. Compare the logs and you will see where it is stopping. There's a good chance that will lead you to the problem.

Git

[SonofabiT]

@besoeso - Check your P.M. I have been managed a multikey reg of your hasp dongle dump. I wish you will test it and confirm me if you still get any problem ;)

[gus]

[NO unnecessary quoting please]

Please is possible explain this step?

thanks

[akoyl]

Hi,
could someone tell me how can I convert a QTable to DTable to be used with Multikey V18.0.3 emulator (for a Hasp HL emulation).

Thanks in advance

[gnerogeem]

This (http://www.reteam.org/board/showpost.php?p=16462&postcount=1)

[geophylika]

pls explain step 6
how to got 2 pairs q/a table!
how can i get 4096 byte .bin file

[butaktelco]

@ besoeso
i have same experience with these method
remove error 1031 with extract from 4096.bin as tutorial dave
but me not use bin2dtable

then i try install emulator
software can loading but after processing decrypt API application missing not showing in window

then i trace with olly some api not fix, then i try to find point to unpack these application

but OEP not found
looks these post
http://www.reteam.org/board/showpost.php?p=26868&postcount=4

i dont know whats solution to create emulator with right step