Win7- 64 bit Multikey problem

[Yawar]

hi all members .... i have facing a problem that multikey are not working in win7 - 64bit .. its not installing any key and not copy any file ...


any one guied me how to install it in win7 step by step procedure...

waiting your kind reply....

[BfoX]

login as Administrator, disable UAC and swith win7 to Test mode ;)

[Yawar]

After test mode Enable and disable all users accounts same problem ...

Picture of Error Attached ..

http://www.freeimagehosting.net/uploads/5c26b3b6f0.jpg (http://www.freeimagehosting.net/)

[xone]

just edit install.cmd file and put there direct patch to the devcon and multikey.inf files.. and run it as administrator again..

[Yawar]

sorry i cant understand how to patch..... kindly you guied me with any example .......

waiting kind reply ....

[xone]

ok.. here is original install.cmd

@devcon remove root\multikey
@devcon install multikey.inf root\multikey
@pause

My MultiKey for 64bit is located at C:\MultiKey64\ (for example).
..so I've modified install.cmd like this

@C:\MultiKey64\devcon remove root\multikey
@C:\MultiKey64\devcon install C:\MultiKey64\multikey.inf root\multikey
@pause

done :)

[Yawar]

dear this time its give message that ........

No devicess were removed.
devcon failed.
press any key to continue......


Now what can do .... thankx for helping me to solove this problem....

[Lomex]

Hi,

read the how to from Litmanen here

http://www.reteam.org/board/showthread.php?t=2344&page=3

That worked for most people.


cu


Lomex

[xone]

Yawar did you run it as administrator (right mouse click > "run as administrator")?

[Yawar]

Yes i run install.cmd as administrator by right click .....

[xone]

hmm.. try right click > properties and change compatibility to Win XP sp3.. I'm not on Win 7 right now so I can't check where this option is for sure..

[Leolo]

This is a known problem in Windows Vista and Windows 7.

When you right-click and select "run as administrator", Windows will run the CMD script under the system32 folder instead of using the current folder.

Microsoft did this in order to annoy all the people who are still using batch scripts (me included) and to try to force them and shove PowerShell down their throats.

Thankfully, there's a workaround. Add the following line as the very first line of the CMD script (you'll need to use notepad):

FOR /D %%I IN (%0) DO CD /d %%~dpI

That line changes the working directory to the current directory where the CMD is located.

Kind regards.

[foffa]

good hint thanks , alot in here use batch files :)

[xone]

Thank you Leolo..

[Leolo]

Hi,

foffa & xone, you're welcome :)

This one should also work (and it's shorter and easier to remember):

cd /d %~dp0

I've found it on the comments of this post:
http://blogs.msdn.com/oldnewthing/archive/2005/01/28/362565.aspx

Raymond Chen's blog is quite interesting. Lots of juicy info about Windows there...

Regards.

[saullow]

I have the same problem.... i've tried all of this and i cant solve!!

could you help me?

[gnerogeem]

You have to disable UAC and run Driver Signature Enforcement Overrider 1.3b with the Administrator rights. Download it here. (http://www.ngohq.com/home.php?page=dseo)
Restart PC. Install Multikey and the reg file. Restart PC again.
To see whether Multikey is successfully installed, you can check it at the Devices And Printers. This step worked for both of me and my friend PC. If not, there is something wrong with your reg file.
For more information, you can check this thread. (http://www.reteam.org/board/showthread.php?t=2344&page=3)

[saullow]

i'm trying to do works the vusbbus emulator on link below:

http://www.4shared.com/file/255769614/157daa2d/vusbbus.html

Somebody could test this and help me to do works on Win7 64bits ???

always give the same error with me: "devcon failed" (i've tried devcon x32 and x64)

thx in advance.

sorry for bad english...

[gnerogeem]

lol, that step is for Multikey, not for vUSBbus.
BTW dude, what the purpose you post a vUSBbus link here?
Search for Multikey 0.18.0.3 or later and follow the step for x64.

[Git]

Search for Multikey 0.18.0.3 or later

Actually, if he is 64 bit, he wants MK 18.0.3 or earlier, as that was the last 64bit version.

Git

[gnerogeem]

@Git, opssss brain fart. My mistake, or earlier.

[bolota]

@saullow
do you have a .reg file of this emulator, if yes show us.
bolota

[saullow]

[DO NOT quote whole messages]

No! i dont have... I just want make it works...

Did you get it?

[gnerogeem]

@saullow
Do you have the actual dongle?
If not, just forget it on emulating the dongle.

[saullow]

i just have the same error: "devcon failed"

anybody knows how fix this?

[jabrik_gokil789]

The same thing happened with my devcon failed

[trasolamo]

Hello,

I have a big problem installing multikey 0.18.0.3 on my 64bit system. I get the following error:
http://www.freeimagehosting.net/ebf05
http://www.freeimagehosting.net/ebf05

The system is in test mode and I signed the multikey.sys with dseo13b.

Can someone confirm the correct version of the multikey.inf file:
; Copyright (c) 2004-2008 Chingachguk & Denger2k. All rights reserved
;
; INF file for installing virtual USB multikey 64bit driver

[Version]
Signature="$WINDOWS NT$"
Class=System
ClassGuid={4D36E97D-E325-11CE-BFC1-08002BE10318}
Provider=%MSFT%
DriverVer=04/15/2009, 0.18.0.3
CatalogFile=multikey.cat
CatalogFile.ntamd64=multikey.cat

[DestinationDirs]
DefaultDestDir = 12

[SourceDisksNames]
1 = %DiskId1%,,,""

[SourceDisksFiles]
multikey.sys = 1;

;*****************************************
; Virtual USB MultiKey Install Section
;*****************************************

[Manufacturer]
%StdMfg%=Standard,NTamd64

[Standard.NTamd64]
; These are the virtual USB bus pnp ids

%MultiKey.DeviceDesc%=MultiKey_Device, root\multikey
;%MultiKey.DeviceDesc%=MultiKey_Device, c:\windows\system32\drivers\multikey

[MultiKey_Device]
CopyFiles=Drivers_Dir

[MultiKey_Device.NTamd64]
CopyFiles=Drivers_Dir

[Drivers_Dir]
multikey.sys

; --- Service installation
[MultiKey_Device.NTamd64.Services]
AddService = multikey,%SPSVCINST_ASSOCSERVICE%, mkey_Service_Inst
[MultiKey_Device.Services]
AddService = multikey,%SPSVCINST_ASSOCSERVICE%, mkey_Service_Inst

; --- vUSB driver install sections
[mkey_Service_Inst]
DisplayName = %mkey.SVCDESC%
ServiceType = 1 ; SERVICE_KERNEL_DRIVER
;StartType = 3 ; SERVICE_DEMAND_START
StartType = 2 ; SERVICE_AUTO_START
ErrorControl = 1 ; SERVICE_ERROR_NORMAL
ServiceBinary = %12%\multikey.sys
LoadOrderGroup = Extended Base

[Strings]
SPSVCINST_ASSOCSERVICE = 0x00000002
MSFT = "Chingachguk & Denger2k (Elite & SP edition)"
StdMfg = "(Standard system devices)"
DiskId1 = "Virtual USB MultiKey Installation Disk #1"
MultiKey.DeviceDesc = "Virtual USB MultiKey"
mkey.SVCDESC = "Virtual USB MultiKey"

I tried everything I dont know how to help me. I allready installed the multikey on a 32bit system and worked out fine. but there is no way for 64bit.

I used the recent WDK 7

thank you

[LITMANEN]

trasolamo, are you sure you are in test mode? How do you know that?
Go to Device manager, right click Multikey and choose Uninstall. Mark the checkbox "Delete driver from system" there. After you uninstall and delete MK make sure that MultiKey.sys is signed. Check its Digital Signature tab. Now install it again.
By the way try to turn UAC off. Also try to run install.exe as administrator. Hope it helps.

[yogi_saw]

I m sure u r missind line in .bat file
cd dp0.... Pls read threads for same issue for more details

[trasolamo]

Thank you for the reply guys,

the fact is I have two systems one notebook with WIN7 32bit (Home Premium) on it and I installed mk0.18.0.3 on it using the well described steps in this board. It worked out fine in Windows TEST MODE. Afterwards I turned the TEST MODE OFF and REBOOT the 32bit system. With the test mode disabled it works fine, there are two sentinels working:
http://www.freeimagehosting.net/3d7fd

NOW I would like to have that on my 64bit system (WIN7 Ultimate),
It worked fine in TEST MODE ENABLED following this:http://www.reteam.org/board/showpost.php?p=15392&postcount=9

Like I showed before in my WIN7 32bit the emulator mk is working with disabled TEST MODE, nevertheless when I switch the TEST MODE off in 64bit the driver comes with error 52 code.

Why do we have that differences?

2nd question: Having the TEST MODE enabled permanently is bad for my 64bit system? (vunerable)

thanks in advance!

[geophylika]

hi,dear
i had use 18.2.4 64bit emul on win7 64 OS,and dongle emulator start,can be found on hardware manangement.
but the programme still can't found hardware,why?

the reg file is emulate on xp 32bit perfect,the same reg file with 64 bit os and emulator tools,with different result,

can anyone explain why?

[LITMANEN]

geophylika, use mk 0.18.0.3 (64bit) + test mode.

[titko]

Dear Litmanen,

I did all the steps as per your guide but when I right click on multikey.sys property -> Driver, I found Digital Signer : Not digitally signed.

May I know what's wrong?

Thanks

[trasolamo]

@titko
I think You should have the test mode enabled (You see a water mark on the bottom right corner of your desktop) AND sign the driver (using dseo13b)

Do You guys have a explication for the different behavoir of the same emulation in 32bit and 64 bit?

[kjms]

patch the multikey.sys with dseo1.3 also refer this thread http://www.reteam.org/board/showpost.php?p=19396&postcount=46

[titko]

@ Trasolmo & kjms,

Yes, it is under test mode and signed by dseo13b

[LITMANEN]

titko, if you have signed it there should be like this
click. (http://img717.imageshack.us/img717/4513/signaturehw.gif)

[titko]

yes, I have this tab, but under this tab, I saw the "Digital Signer : Not digitally signed"

[geophylika]

geophylika, use mk 0.18.0.3 (64bit) + test mode.

tks a lot.
it is a good suggestion.
work fine,tks.

[LITMANEN]

titko, screenshot of your tab? Ordinary there is no such a tab at all. Download MK again and check it -- you will see no tab. But after you sign it the tab will appear. But I don`t know why you have Not digitally signed instead of Signature list. Check (and use) mine http://www.sendspace.com/file/er015u Will it help u?

[titko]

Litmanen, enclose herewith the screenspot for your comment.

http://www.sendspace.com/file/up0k09

Thanks

[LITMANEN]

titko, it`s OK and it should work. We were talking about different things.

[titko]

Litmanen, unfortunately still cannot run my software under x64 (no problem running under x86)
Thanks

[ianlcc]

hi all dear members .... i have facing a problem that multikey are not working in win7 - 64bit , I think that should many people will face it and try to make it work.
So I try look for the solve for it and try do it myself , but it can’t installing any key and not copy any file ...
anyone can guied or help me how to install it in win7 step by step procedure please...
I explain my situation and software….
My computer OS:Windows 7 Home Premium 64bit
File:
09C7652E.reg
Install.cmd
@devcon remove root\multikey
@regedit /s 09C7652E.reg
@devcon install multikey.inf root\multikey
@pause
Devcon.exe(version:6.1.7600.16385)

Before I just use the vusbbus to install my computer, that time my computer’s OS is WINXP PRO, and it’s work fine.
Then I change the computer OS, someone help me to make the 09C7652E.reg file to try it.
But it can’t do it .
So hope the dear memebers can help me , I already try mamy time…please
I’m appreciate it .

[user1]

Hi

I have attached X64 version of Mk 18.1 and 2.4. Last one I don't know if you need to register, to pay for.

Please run Dseo12.exe and enable TEST MODE because Win 7 X64 needs drivers to be digitally signed and they won't install. Please read this forum for more info's.

http://www.multiupload.com/KVNX72RLT2

Multikey Emulator X64

[LITMANEN]

titko, MK is working properly. That`s all I see. But I don`t know why your software doesn`t work. If you feel that exactly me can help you, contact me via Private messages because in my opinion your question does not apply to this topic.

[kroff]

i too have a similar problem.
i normaly use vUSB for my virtual 32 machines running winxp.
now i need to run it on a real win 2008 r2 server, but there is no sentinel dongle device installed after i make all the steps.

the multikey.sys in the drivers folder is signed, the device seems ok in the device manager, the reg file is imported in the registry (changed a few things as per instructions, from the vusb reg file)

but with vusb as soon as i install it, a "new device found" pops up and installs the sentinel drivers, here with multikey nothing happens.
any ideas?

[ianlcc]

Hi all dear members , I have facing other problem that multikey are install in Win 7 64 bit successary , but I went to Device manager , the system devices there are yellow exclamation mark , it show windows can’t verify the digital signature (Code 52) . And it always happened.
The second problem is that if I want to run software , I always must restart my computer , and when I reboot my win7 , I must press F8 and choose “disable driver signature enforcement” , then come in the OS is show the system devices yellow exclamation mark disappeared . and the software can run for fine.
Can not resolve restart computer when I want to run the software every time? And the system devices there are yellow exclamation mark problem.

[yogi_saw]

If u get devcon failed after all 64 bit procedure done just add following in start of install.bat
cd /d %~dp0
If u get yellow exclaimation mark install dongle drivers

[ianlcc]

I am sorry.
I don’t understand your mean.
My mean is I can run the softwart, but every time when I run the software before, I must restart my computer and press F8 to choose “disable driver signature enforcement”.
This is the first problem. It’s not convenient for user.
The second problem is at device manager , the system devices there are yellow exclamation mark , it show windows can’t verify the digital signature (Code 52) . And it always happened. How can I disappear it ?

[LITMANEN]

ianlcc, use DSEO to turn Windows into test mode permanently. Then you don`t need to press F8 each time.

[ianlcc]

Excuse me , your suggest is use “Driver Signature Enforcement Overrider 1.3b” to do it.
Before I install the driver, I have use the “Driver Signature Enforcement Overrider 1.3b”“Enable Test Mode” button.
But after this step, when I will run the software, I must restart my computer and press F8.
Another I had found a question, that when I use the “Driver Signature Enforcement Overrider 1.3b”, I don’t type :” C:\Windows\System32\drivers\ multikey.sys”
I just type : ” C:\ multikey 64\ multikey.sys”
Do I type wrong step?

[LITMANEN]

ianlcc, sorry. I don`t understand you.

[ianlcc]

Excuse me , I think I give you wrong message.
I said I had use the “Driver Signature Enforcement Overrider 1.3b”“Enable Test Mode” button.
Then I install the Multikey success.
But in the Device manager , the system devices there are yellow exclamation mark, and if I want to run the software, I must reboot and press F8 and choose “disable driver signature enforcement” into the OS and it can run the software.
My question is I don't want to reboot and press F8, and quick to run software.I don't want to use the step.
And if I use “Driver Signature Enforcement Overrider 1.3b” and choose the ”“Enable Test Mode” button, and reboot . I know I can use the software.But in the screen right-down , it appear the TEST-MODE.
Can I not use the normal situation to run my software?
That my main question.

[Lomex]

YOU HAVE NO CHOICE. No one asks what you want. Accept it.
Already asked here 1 million times and you get always the same answer.

Or you pay 200$ a year to microsoft and digital sign this driver with a working certificate.

And the test Mode just means, that you can install unsigned drivers. Got nothing to do how Windows 7 works. There is a tool to remove that Test Mode screen.

cu

Lomex

[Git]

Cool it guys. Keep to technical issues please.

Git
Moderator