hardlock

[don_007]

hi 2 all
sir i want help on hardlock cracking i find seeds from dump and make safekey's emulator(fst)file.but it does not work even seeds are correct.the vendor also provide a licence file with hardlock.
somebody please help me how to compile vbus.sys,vbus.cat and vbus.inf from driver and emulate it

[ngoksun]

hi 2 all
sir i want help on hardlock cracking i find seeds from dump and make safekey's emulator(fst)file.but it does not work even seeds are correct.the vendor also provide a licence file with hardlock.
somebody please help me how to compile vbus.sys,vbus.cat and vbus.inf from driver and emulate it
Vbus.sys was just for HASP dongle emulator. For hardlock, you can use safekey emulator.

[asus]

Hi don_007,

Please drop me a PM, I will help you out.

[don_007]

sir
i make emulator (safekey) but it does not work proper
the seeds are correct even it show hardlock attached computer
but without any memory(no data as expire date when i run key info program )
and about vbus.sys vbus.cat and vbus.inf . i think also used for hardlock?

[asus]

Check your PM.

[don_007]

hi
hardlock api version is 3.83
and i try hardlock.sys both (24k and 25k)
on 24k error is 1007
on 25k error is 1002 ,conflict configration
i think i got solution by patching hardlock.sys
so plz. help to fuck target
i also compile vbus.sys from driver but i want bat files for install
emulator specially how to install virtual hardlock from dump?


thanks

[cEnginEEr]

hi
...i also compile vbus.sys from driver but i want bat files for install
emulator specially how to install virtual hardlock from dump?
thanks

Man, what's wrong with you, scroll up a little and will see this:

Vbus.sys was just for HASP dongle emulator. For hardlock, you can use safekey emulator.

There two version of vbus emulator; hasp & sentinel spro. IT IS NOT FOR HARDLOCK.

regards

[ngoksun]

Actually, we also can find the Hardlock version Vbus emulator in some Russia forum. You can find attachement for study it. It's for Modad:3266 only emulator and it can't modify the 3 Seed easily because it's protected by VMProtect. If you can do it then you can use it as universal USB hardlock emualtor.:)

[asus]

Actually, we also can find the Hardlock version Vbus emulator in some Russia forum. You can find attachement for study it. It's for Modad:3266 only emulator and it can't modify the 3 Seed easily because it's protected by VMProtect. If you can do it then you can use it as universal USB hardlock emualtor.:)

That seems modified vbus emulator and it just supports that MODAD, so we do not waste time to modify:cool:

[don_007]

hi
thanks to all for support
thanks

[don_007]

Actually, we also can find the Hardlock version Vbus emulator in some Russia forum. You can find attachement for study it. It's for Modad:3266 only emulator and it can't modify the 3 Seed easily because it's protected by VMProtect. If you can do it then you can use it as universal USB hardlock emualtor.:)

hi
thanks i have already vbus.sys for modad for my dongle
and i tested it as your sample
and it works very well
thanks

[asus]

hi
thanks i have already vbus.sys for modad for my dongle
and i tested it as your sample
and it works very well
thanks

Did you use vbus from ngoksun's attach?

[don_007]

Did you use vbus from ngoksun's attach?

no i have my own compiled vusbbus.sys

[asus]

no i have my own compiled vusbbus.sys

Oh, thanks, I understood.

[kooolguy]

:confused:
Hi,

Can anyone help me in making emulator for safekey hardlock ? I have the dongle with me.

[cEnginEEr]

...making emulator for safekey hardlock...

hhmmmm, I thought it was from aks :D

[demian19702004]

I have a HARDLOCK dongle and i ma trying to make the emulator for it. Up to now:

1. using "hl_dump": input: 0x…… (MODAD) output: (MODAD).reg, (MODAD).dat
2. using "hl_solver": input: (MODAD).dat output: seed1:0x….. seed2:0x….. seed3:0x…..
3. using "mylock_builder": input: MODAD seed1:0x….. seed2:0x….. seed3:0x….. output: *.FST

Could you help me with next steps. I cant find hl_emulator to procced...

[plan.cao]

Hi all, I 'm breaking my teeth for a moment trying to understand how emulate a hardlock key in order to use a specified software.
I just dumped the key, and you can download it here : http://rapidshare.com/files/196758621/Dump_487F.zip.html
For this, I used hldump from sporaw's web site : http://www.sporaw.com/work/files/hl-dump.rar
the modad is 487F
Then I'd like to know what is the next step ?
I understood that I had to find hl_solver in order to get 3 seeds
but i'm not sure...
Could you help me please, I'd really be thanksfull
Thanks for reading me.

[benito]

just little note:

It is really funny to see there lot of people who posting their dump with private traceable informations...
Maybe you should be more secure ?

[Klopschik]

@plan.cao

very cool information in you dump!

your hardlock type: 880
your hardlocknumber: 96?1
your enabled features:
Grundriss: profi
Abbund: Dach, Decke, Wand
3D-Wand und Deckenelemente: Basis
Visualisierung: Yes

[BfoX]

4plan.cao: i can expand your options to unlimited. if need ;)

[plan.cao]

@benito : There is really a possibility to know who i am with this dump ?
@klopshick : how the hell did you get that ?
@Bfox : how could you do that ? For the moment My soft has option limited as you said but how do you know that ? and how could you make it unlimited ?

[benito]

@benito : There is really a possibility to know who i am with this dump ?
@klopshick : how the hell did you get that ?
@Bfox : how could you do that ? For the moment My soft has option limited as you said but how do you know that ? and how could you make it unlimited ?

Yes,it is possible!

[plan.cao]

ok ! then How should i do ?
what is the next step after the dump
what should I do to make it unlimited

[Klopschik]

light a candle and pray :D :D :D

[plan.cao]

hmm ! funny
& very helpfull

[plan.cao]

I found a soft : hl_solver in order to get the three seeds : http://www.rapidsharedata.com/go/139880838/HL_Solver.rar.html
but this soft seems to be a trial version because when I launch it, it says to me : " cant find the folder c:\trial_solver_directory_demo_version_only\" so I created this folder & I put the 2 files that hl_dumpv2.1 from sporaw's gave me. & then something happend : the soft turns and displays percents of processing. When it have 100%, nothing happens, no folder created & it doesn't give me the 3 seeds. Can anybody help on it ?

[Trit0n]

487F= Old Flora Asic (Not Luna)
Flora = Use UniDumpToReg V1.1b5
Luna = Use Hl_Solver

[plan.cao]

Yes your right, thank you for reply hl_solver doesn't work on this dump, so my dump is Old Flora Asic, & that's why it doesn't work.

Then I used unidmp2reg which created 8 files *.reg with different seeds, then I'll try to make the *.fst with all files. & the one should be in there.

I saw a thread where somebody have the same problem.

[plan.cao]

I found on the forum this emulator : http://rs316.rapidshare.com/files/140004933/HASP_USB_Key_Emulator.rar
and I also find a post that explain that you have to compil your vusbbus.sys to install the emulator :
http://www.reteam.org/board/showthread.php?t=535&highlight=compil+hardlock.sys
then I tried to understand this post but unsuccessfull ...
I copied the emulator on "c:/hasp_emulator"
then I edit the files "chk make.bat" & "free make.bat" to follow the post :
1. Change path in files "chk make.bat", "free make.bat" in
this lines:
set SRC_DRIVE=C:
set SRC_PATH=22\bus
set DDK_PATH=D:\WINDDK\2600.1106
, where SRC_DRIVE - disk drive letter, where sources are located
SRC_PATH - path to .\bus directory,
DDK_PATH - path to Windows XP DDK directory.
for example : "chk make.bat" is edited like that : @ECHO OFF

set SRC_DRIVE=C:
set SRC_PATH=22\bus
set DDK_PATH=D:\WINDDK\2600.1106

call %DDK_PATH%\bin\setenv.bat %DDK_PATH% wxp chk

%SRC_DRIVE%
cd %SRC_DRIVE%\%SRC_PATH%

set DEBUG_BUILD=1
nmake

pause

which I replace like that :
@ECHO OFF

set SRC_DRIVE=C:
set SRC_PATH=C:\Hasp_emulator\bus
set DDK_PATH=C:\WINDOWS

call %DDK_PATH%\bin\setenv.bat %DDK_PATH% wxp chk

%SRC_DRIVE%
cd %SRC_DRIVE%\%SRC_PATH%

set DEBUG_BUILD=1
nmake

pause

then when i launch chk make.bat, it says me that it cant find the path. The path to bus directory is right but DDK_PATH=C:\WINDOWS cant be right because the *.bat call setenv.bat which doesn't exist anywhere because I made a search on C:\

SO I missed something but I dont know what !
As well, it says that "nmake" is not recognize as an internal or external comand.

What am I supposed to do ? I've searched a lot on the forum but nobody speack about setenv.bat which doesn't exist ...

[plan.cao]

in fact i made a search on google & it seems to be a part of visual c++ toolkit I'll keep you informed of my search

[BfoX]

@plan.cao: you have hasp vusb, instead hardlock vusb...

[plan.cao]

Yes, because when I wanted to identify the dongle I go there : http://www.sporaw.com/work/dongles/identity.htm
& my dongle is a MemoHASP4 M1 that's why I took hasp vusb
well, if i'm on the wrong way lets search for hardlock vusb,
seems to be on this link : http://rs150.rapidshare.com/files/84578970/All-In-One.rar

[BfoX]

sema want hardlock dongle, not hasp...

[plan.cao]

When I used unidmp2reg it created me 7 files with different seeds for each :
0000487F
1000487F
2000487F etc.

Then I created mylock.fst files with the different seeds for each

I found vusb V0.15 which contain the vusb files :
vusbbus.cat
vusbbus.inf
vusbbus.sys

So I installed the original driver of my key, then I installed new hardware by giving the path to vusbbus.inf
the installation work properly & then it ask to me if I've already connected the device

then I copied the 1st mylock.fst with 0000487F into the emul ddk & I tried to launch install.bat but nothing happen so it's not necessary to try with the others mylock.fst & the others reg files.

there is the black box & nothing written in it.

I missed something with the installation but what ?

I think that the problem is in the instal.bat ...

[BfoX]

old vusb cant support old dongle...

[plan.cao]

sema want hardlock dongle, not hasp...
ok! I get that, thank you to not let me on the wrong way :)

[plan.cao]

finally,I found this hardlock emulator : http://rs214.rapidshare.com/files/74628445/USB_Emulator_-_Hardlock.rar
but nothing happen when I launch install.bat
Why this doesn't work ! what am I supposed to do ?

[plan.cao]

Honestly, I've search a lot all around this giant forum & I dont know what to do now I'm sure I do not have the corect emulator & this make me crazy :confused:
& all the link which permit to dl hl_emul.rar with the password www.dongla.net are dead !!!
other I found this http://www.rapidsharedata.com/go/91361265/hl_emul.rar.html but bfox said me that it only worked forr hasp then If there is a noble spirit who ear me & want to help a poor damned & evil crazy boy then give me the emulator for hardlock key plz plz plz :)

[Git]

@plan - please don't keep posting messages replying to yourself. There is an Edit button on your posts, please use it and edit your message if you have something to add.

Git

[plan.cao]

ok sorry for that

[Klopschik]

Jesus Christ! Are you not able to use the search funktion???????????????? :confused:

Look here: http://www.reteam.org/board/showthread.php?t=963&highlight=multikey

Download multikey emulator make regfile with unidmp2reg and you are done.

verify [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\...... .] in your reg file.

[plan.cao]

Thank you Klopschik !!!
You finally heard me !!! God bless you ! thank you so much
It works verry well !!! You're just God like, the reincarnation of Jesus christ Himselves ! The one who delivered me & Permit me to start again a new social life !
Thank you so much my friend :D
Many thanks to Git who pushed me to find & learn the solution
& Many thanks as well to Bfox who didn't let me on the wrong way & gave me advices.

This evening I'll make a little tutorial 4 noobs like me with displays shot etc.

[Git]

If you had searched as we suggested many times you would have found Multikey in 5 minutes.

Git

[plan.cao]

Yes, you're right but I found multikey before butI didn't understood how to use it. Be sure that I've searched a lot but when you dont know what to search it's quite hard.
As well I'm french & my english is not verry good so I do not understand every thing especially when you use technic terms.
By the way, many thanks to reverso : http://www.reverso.net/text_translation.asp?lang=FR

[plan.cao]

multi key : http://rapidshare.de/files/40014209/Multi.rar.html
password reteam.org
hl_tools : http://www.sporaw.com/work/files/hl-dump.rar
toro monitor : http://rapidlibrary.com/download_file_i.php?qq=toro%20monitor%203%202&file=304454&desc=Toro+Aladdin+Dongles+Monitor+V3.2+new+.rar
unidmp2reg : http://rapidshare.de/files/44232777/lecturas_sp4_wilcom_2006.rar.html

[Tyrus]

plan.cao
unidmp2reg : http://rapidshare.de/files/44232777/..._2006.rar.html
it wilcom dump :)

[plan.cao]

you welcome ;)

[Klopschik]

@plan.cao
@ntgerzson

You should be more careful! Do you think sema developer doesn't read this forum? Especially dump file from plan.cao are very interesting for them.

[plan.cao]

yes but the dump cant be download anymore ... You're right we should be more secure I get of my tutorial then

[kaka.enine]

Dear Master,

wanna ask about time limitation license on Hardlock dongle ??

anyone know how 2 by pass this time limitation being unlimited ??

should be modified on physical or we can modified on reg file ??

i've succeed emulate this hardlock used multikey ...

thanks for advice ...


BR,

-kaka-

[Git]

If you are referring to the inbuilt hardlock RUS system, I don't think it applies to the earlier Flora devices such as this one, BICBW. I believe the Flora devices were based on a simple PLA type logic array so I don't see how it would have storage for the RUS info. Anyone know for certain on this please?.

Git

[plan.cao]

I dont think we can modify the physical memory of the Hardlock Anyway, we must be able to change the dump in order to modify options of the key. Then I understood that it is not the rus fonction but the code ASCII of the dump that you have to modify (dat file & not reg file). The fact is that the dump cant be read like that. The program you used to make the dump have its proper encoding then You have to find the proper reader ...

[Git]

Not sure what you are referring to, but the hardlock has two types of memory. The first 0x60 bytes is EEPROM and is used by all Luna Hardlocks. The last 0x20 bytes from address 0x60 to 0x7F is only present on some Luna Hardlocks. The Vusb emulator emulates all 0x80 bytes of memory so the RUS licensing data most certainly is in the reg file and can be altered if you know what you are doing. I guess where you may be coming from is the fact that any MCU is going to have program memory and no, you can't get at it easily, but in the case of the Hardlock no licensing info is stored there.

Iif you search here you will find a long thread on the subject.

Git

[kaka.enine]

can yu explain with basic xplannation ??

i'm a newbie in reversing stuff ...

have already read some tutorial but hard to understand what should i do 1st to solve my problem on hardlock time limit ...

need advice master ...


BR,

-kaka-

[plan.cao]

@kaka.enine try this :
http://www.reteam.org/board/showthread.php?t=912&highlight=modify

@Git It is sure that the file to change is the reg file, because it the thing used by the emulator but as you said You really must know what to change. If you say that all license info is in the reg file then there must be a way to explore the options.

[smithjsmi]

@kaka.enine try this :
http://www.reteam.org/board/showthread.php?t=912&highlight=modify

@Git It is sure that the file to change is the reg file, because it the thing used by the emulator but as you said You really must know what to change. If you say that all license info is in the reg file then there must be a way to explore the options.

Here is discuss about hardlock, and you give the referrence about sentinel?

[BfoX]

Here is discuss about hardlock, and you give the referrence about sentinel?

you not try use search on BB?!
http://www.reteam.org/board/search.php

[ntgerzson]

Hello guys!

I find the english version of the progam whitch modad is 487f
If you want that search me in pm!

[BfoX]

Hello guys!

I find the english version of the progam whitch modad is 487f
If you want that search me in pm!

welcome NEW trader to Reteam BB
:D :D :D

the sema software can be found simply at P2P and other warez sites...

[Git]

Withdrawn

Git

[ntgerzson]

He is not the first person here to try to sell the fix for that software.

Git

ohh Sorry my english is very bad!
I dont want to trade the software!! just share the download link with you! thats all. And it was a little thank to plan.cao
with best regards.

[Rew]

Hello could sameone sent me sema 11. 5400 working emulation dongle? (i don't have any so i can't work with it normaly) i have on allmost working vusb emu, but in this version don't work anything that follows POLYGONs. could someone help me? modal 487F. I searched and tested every link i found in 2.5 weeks bloody weeks.

Is there anyone how could help or show how to make changes that it will fix my problems?

[Thangdc]

How to change time in flora hardlock memory ?
"Data"=hex:35,33,31,35,20,54,64,76,20,2D,20,48,65,69,6E, 7A,\
20,50,69,72,63,68,65,72,20,75,6E,64,20,50,61,72,\
74,6E,65,72,2C,20,41,2D,38,30,31,30,20,47,72,61,\
7A,2C,20,41,75,73,74,72,69,61,20,20,20,20,20,20,\
20,20,20,20,20,20,20,20,20,20,20,20,20,20,20,20,\
20,20,20,20,20,20,20,20,20,20,20,20,20,20,20,20,\
49,4E,49,54,25,4E,67,3A,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
data mark is time save 7/6/2009 how to change 1/1/2009

[kamener]

How to change time limit in luna hardlock memory ?

HardLock API version: 388
Chip type: Luna ASIC (new revision)

"HlkMemory"=hex:\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,0F,DE,2D,0D,00,00,00,08,00,00,16,00,AF,9E,\
40,11,00,00,00,00,FE,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,E1,DE,02,C6,29,11,00,00,00,00,F7,2B,E9,16

thanks

[BfoX]

@kamener: RUS options inside...

[nodongle]

kamener

You need:
- change bytes "40,11" to new ones
- replace CRC to correct one

[kamener]

nodongle,thank you very much! but i think it is hard work.can you help me to change it?i will give a sofwware copy to you for thanks.

[BfoX]

@kamener: upload the target software...

[kamener]

i will give you the download link in pm,thanks

[kamener]

bfox,i have sent the target software download link to your pm.thank you very much

[ggg]

hi
thanks to all for support
thanks

hi, too all. I am new on the forum and i am trying too make a hardlock emulation for my program, its a blue usb hardlock dongle and my OS is win 7 32 bit can anyone help me too solve my problem??? here are my dumps:
http://hotfile.com/dl/96990862/84c135f/dumps.rar.html

plz help....

[BfoX]

@ggg: redump it with the sporaw's dumper and show .reg/.dat pair :)

[sparpacillon]

just noted that there are some users that ask for the same thing, same dumps, with different names... may be they are all brothers :P

@ggg i already said what you have to do.. in your other post
where FLASHER97 was asking for reg from me.

[kamener]

[Please DO NOT quote whole messages, it is unnecessary]

who are they? is it really that they just ask for reg/dumper file?

i think there are many good users in the forum,they like to help other people to solve their problem.may be it?

thanks for bfox hard work,he is a good man.