PDA

View Full Version : Emulator İs Make To Vusbbus.sys


excelance
10-31-2007, 06:46 AM
Hasp Emulator tools for making to vusbbus.sys vitrual drives. :D

his emulator and it sources are intended ONLY for legal use. Thus, legal
emulation of protected program HASP keys according to the law is about to
protect copyrights of the country in which you live or according the international
agreements.

Any use of the given program, breaking copyrights or international agreements,
is not lawful.

ALL CIVIL and the criminal LIABILITY FOR ILLEGAL USE OF EMULATOR AND IT
SOURCES LAYS ONLY ON USER.

Authors of this program do not carry any responsibility for any actions of users
concerning copyrights violation.

YOU MUST NOT DISTRIBUTE THE EMULATOR AS A COMPILED PROGRAM AND TURN IT'S USAGE TO YOUR ADVANTAGE.

If you are not sure concerning your rights, please contact your local legal adviser.

----

To compile emulator:
1. Change path in files "chk make.bat", "free make.bat" in
this lines:
set SRC_DRIVE=C:
set SRC_PATH=22\bus
set DDK_PATH=D:\WINDDK\2600.1106
, where SRC_DRIVE - disk drive letter, where sources are located
SRC_PATH - path to .\bus directory,
DDK_PATH - path to Windows XP DDK directory.

2. Execute
"chk make.bat" for make debug build or
"free make.bat" for make release build.

3. For device driver installation execute
"chk install.bat" to install debug build or
"free install.bat" to install release build of driver.

On run driver once scan registry key
\Registry\MACHINE\System\CurrentControlSet\Service s\Emulator\HASP\Dump
, read dumps of all keys and create virtual USB-keys for each dump.
For success execution of this phase you _need_ to have already
Aladdin HASP device driver installed.

4. For "unplug" all virtual USB-keys you can execute file
"unplug all.bat", which call enum.exe to do this task.
With help of last program you can not only "unplug" keys,
but also "plug" it, see .\Controller\enum.exe /?.

in the general case for rebuilding list of avalible USB-keys according
to registry state you can restart driver (see p. 3) or use
enum.exe utility (see p. 4).

Emulator installation:
1. To install emulator you need 3 files:
.\Inf\vusbbus.cat
.\Inf\vusbbus.inf
.\Inf\VUsbBus.sys
, ãäå VUsbBus.sys - compiled from sources driver.

You can install this driver in two ways:
1. First method:
3.1. Run\Settings\Control panel\Device installation
3.2. Yes, device is already connected
3.3. Add new device
3.4. Install device from list manually
3.5. System devices
3.6. Install from a disk...\Browse...
3.7. Locate .\Inf directory, then "Îê".

2. Second method: add to .\Inf directory file devcon.exe
and .bat-files with this content:
Install.bat:
@echo off
devcon remove root\vusbbus
devcon install vusbbus.inf root\vusbbus

Remove.bat:
@echo off
devcon remove root\vusbbus

BfoX
10-31-2007, 12:18 PM
It package not help you:

Part 3C/3D is removed

//---------------------------------------------------------------------------
#pragma warning(disable:4731)
#pragma warning(disable:4102)
extern "C" __declspec (naked) void __fastcall HashDWORD(DWORD *Data, BYTE *edStruct) {
// Sorry, censored
}

don_007
11-01-2007, 03:43 AM
hi
have any body sources for hardlock?

foffa
11-01-2007, 06:30 PM
also this for hasp

not hardlock

zsj008od
12-03-2007, 03:25 AM
the VUsbBus.sys version is 0.1.
the new is 0.15.

cEnginEEr
12-03-2007, 04:34 AM
the VUsbBus.sys version is 0.1.
the new is 0.15.
thx for info...post a link here; ;)

ripper_bg
12-03-2007, 05:17 AM
thx for info...post a link here; ;)

http://rapidshare.com/files/73955573/VUsbBus.sys
:D
PS
*reg file
QTable =In
ATable =Out

cEnginEEr
12-04-2007, 05:20 AM
hehe..stolen from exetools :huh: ? :D

papi
12-04-2007, 06:20 AM
hehe..stolen from exetools :huh: ? :D
HEEEEEHEEEE

ripper_bg
12-04-2007, 11:29 AM
hehe..stolen from exetools :huh: ? :D

HEEEEEHEEEE

heheeee exetools stolen hoohooo

wasm.ru:D :D
I sory
http://www.wasm.ru/forum/viewtopic.php?id=10371

Terminator3
12-04-2007, 04:52 PM
Apparently there's a vbus emulator for Hardlock Dongles too..
Does anybody have the files for that one?
Thanks

papi
12-04-2007, 06:56 PM
heheeee exetools stolen hoohooo

wasm.ru:D :D
I sory
http://www.wasm.ru/forum/viewtopic.php?id=10371

No friend you wrong this vusbus are from 2005 year ;)

See my message in exetools that I ahve post I take it from ru board

REGARDS ;)

kooolguy
12-06-2007, 04:09 AM
Hi,

I am using a s/w which is protected by Hardlock. I have rcd. the emulator from a friend for the same. It contains VUSBBUS.sys file too. May me this file is useful for you Terminator3.

Can somebody help me in creating similar emulator for another HL protected s/w. It works very well without any problem. Thanks.

You can download the full emulator form the following link:

http://rapidshare.com/files/74628445/USB_Emulator_-_Hardlock.rar.html

papi
12-06-2007, 04:23 AM
Do you have reg file for this vusbus emul? if yes could you please share it.

kooolguy
12-06-2007, 05:41 AM
Link for the reg file is :

http://rapidshare.com/files/74641626/Reg_file.rar.html

xor_axax
12-08-2007, 03:32 PM
Hi,

I am using a s/w which is protected by Hardlock. I have rcd. the emulator from a friend for the same. It contains VUSBBUS.sys file too. May me this file is useful for you Terminator3.

Can somebody help me in creating similar emulator for another HL protected s/w. It works very well without any problem. Thanks.


You only need a new dump from new hardlock and then you need to calculate the 3 seeds from that dump and you can calculate that seeds with Hlsolver that you can find in CrackZ's page or UniDumpToReg from Sataron in Woodmann forum and then you only need to edit the reg file that you posted and it must to work because with me it works very well. :)

kooolguy
12-11-2007, 08:08 AM
Hi Everyone,

I have dumped the Hardlock dongle through HASPHL2007 (got the dump) & then created the DNG file though edgespro11. It said that the dng file was also created sucessfully. But after loading the dng file on HASPHL2007 & running the software I got this error from the software "Configuration Conflict: Error Code 21". Can anybody help me on this. The files are available on :

http://rapidshare.com/files/75805096/Dump_Through_HASPHL2007.rar.html

http://rapidshare.com/files/75805097/DNG_through_edgespro11.rar.html

Thanks in advance :)

fejkus
01-06-2008, 06:51 AM
Hi,

can someone share vusbbus.sys v.015 with 3C/3D section included?

and also example of reg file with Q/A table

Thanks so much.

mastergr
01-20-2008, 10:04 AM
Vusbbus i think a full version with 3C/3D commands

If anyone know more about...wtite...



http://rapidshare.com/files/85173143/vusbbus_Full.rar.html


Mastergr

souze_villy
01-20-2008, 10:38 AM
Vusbbus i think a full version with 3C/3D commands

If anyone know more about...wtite...



http://rapidshare.com/files/85173143/vusbbus_Full.rar.html


Mastergr
hi,
This is good for us that you share the vusbbus.sys file. Can you tell us that this is only for hasp4 or hasphl too? Pls

mastergr
01-24-2008, 08:45 AM
This version emulate an HASP HL (not hardlock) PERFECT!

is a little bit slow then original hardware but i think is normal!..


I include now the (modified) reg file!

http://rapidshare.com/files/86212065/reg.rar.html


MasterGr

fejkus
01-24-2008, 02:20 PM
This version emulate an HASP HL (not hardlock) PERFECT!

is a little bit slow then original hardware but i think is normal!..


I include now the (modified) reg file!

http://rapidshare.com/files/86212065/reg.rar.html


MasterGr

what dumper do you use? h5dmp.exe?
and for conversion? sataron's unidmp2reg convertor?

regards Fejkus

Pan88168
01-27-2008, 03:45 PM
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\NEWHAS P\Services\Emulator\HASP\Dump\AAAABBBB]
"QTable"=hex:\
01,4F,99,CB,FE,33,DC,25,05,E6,73,60,ED,16,F2,36,\
20,58,C8,37,AA,4C,54,CF,F7,34,60,10,5F,0B,A7,EB,\
C3,D0,F8,CD,18,9A,4F,CA,00,C5,B3,F4,DF,1F,81,02,\
.....
"ATable"=hex:\
B1,C7,FD,28,8F,57,56,7C,F2,0D,B3,5E,6C,8A,B3,49,\
2B,55,61,EE,7E,1B,BF,11,EF,C3,D4,12,94,09,16,C6,\
33,3E,14,F1,5E,FD,B6,31,90,59,D9,BE,A8,DC,4C,62,\
E1,B9,89,0A,4B,3E,F7,41,DB,34,FB,19,DD,61,17,4C,\
....

foffa
01-27-2008, 04:40 PM
This version emulate an HASP HL (not hardlock) PERFECT!

is a little bit slow then original hardware but i think is normal!..


I include now the (modified) reg file!

http://rapidshare.com/files/86212065/reg.rar.html


MasterGr

@Pan88168 you right
the sample reg mastergr post( not for hasp_hl )

uel888
02-21-2008, 07:00 PM
@mastergr

Do I need to replaced the vusbs.sys 1.5 of Chingachuk to your vusbs.sys? I tried but it will not install.

I need your idea how to use your vusbs for the emulator of HASP HL.

Thanks sir.

excelance
03-01-2008, 04:10 AM
Thank You

All Replyed....

eng-ars
03-09-2008, 01:37 PM
What´s the WINDDK directory...

" DDK_PATH - path to Windows XP DDK directory. "

eng-ars
03-09-2008, 09:36 PM
Please help me... I have read many times this post... but i don't understand .... Look the imagen .... Only want to install the emulator

Thanks friends

foffa
03-10-2008, 10:16 AM
@ares

frist do you know what is this emulator is ????? :cool:

and what is winddk ?!!!?!?!?!? :cool:

:cool:

benito
03-10-2008, 10:43 AM
Please help me... I have read many times this post... but i don't understand .... Look the imagen .... Only want to install the emulator

Thanks friends

ooh jesus :p

luzhmu
10-02-2008, 10:00 PM
it is XXXXXXX.303:)
GOOD