netHASP emulation

[zestea]

hello guys i have soft protected by netHASP dong + License Manager
i had dump with EDGE-HASP solver but wont work, i have no idea to create license file, do anybody have suggestion to solve this problem?


thanks

[cEnginEEr]

dos your SW complain about dongle or license? what type is your hasp DONG? h4 or HL?

[zestea]

soft run on network, need HASP, netHASP+license manager simultaneously, both are HASP HL family dongle. what do you think CengginEEr?

thanks

[cEnginEEr]

emulation of hasp HL is done via table method, U must:
1- run HaspHL2007 and install driver.
2- run your software and play around with her for few minutes,
3- HaspHL2007 will create 'c:\HL_CODE.TXT' (AES encode\decode)
4- dump your dongle and create .dng file
5- load it so your SW can work now..

p.s you can post here your dumped file so I can take a look..

[zestea]

actually my soft complain to both netHASP dong and license manager, i had dump the dongle follow your step, but soft ask me about license file, so my friend cE what shoul i do?

thanks a lot

[Softlock]

Hi,

I am using a hasp HL dongle.
I tried to emulate it with HaspHL2008 and HaspHL2007. but the output was dump.bin file.
So i couldnt use EDGE-HASP Hl solver to get the .dng file.
I also tried HaspHL2006 posted by the master cEnginEEr. But I dont know why it didnt work for me (not able to get the ModAdd even i refresh many times running my software, i installed the driver after deleting the old mshcmd.sys. file and all in order)
can i convert the 8.26kb *.bin file to *.dmp file, so that i can use EDGE tool???
Mean while i had tried hl-dump from Sp0Raw also HLDMP from nodongle. to get the 8.12kb *.dat file and 31.7kb *.reg files.
i dont know how to proceed from there...
iam attaching it here..
Also i tried Glasha@brstudio.com hlmon to get *.dmp(2.15kb) file with which Edge tool gave the message that of "unknown file size". I also tried Universal HASP Dump->To->Reg converter by sataron to convert this *.dmp to *.reg.
again the message was "unknown file size"..(not supporting this dump..)
then i tried for *.fst from Chingachguk safe_dump Hardlock32 to get the 8.13kb dump.fst file.
Also made *.fst 138bytes file from the *.dat output from hl-dump as follows using LARRY AND SAFEKEY mylock_builder.

Also i am working to make a vusbbus.sys hoping that finally it also work for hardlock... but where is WinDDK located in windows xp sp2 or i need to get seperate virtual usb bus enumerator...???

can anyone guide me... or help me to jump this hurdle...(am not an expert... but trying to learn from u...)

love u all...

Softlock - (not the hard one)

[cEnginEEr]

@zestea: Did you mange to dump your dongle with HaspHL2007? if so then post it here....

@Softlock:Hardlock dumps by HaspHL2007 must be 8400 BYTES size, your file has 8464 byte size and that is why EDGE tools refuses to solve it, I guess that U have dumped it by HaspHL2008, haven't you? try HaspHL2007 plue EDGE tool and see the results (your lock is luna asic and HaspHL2007 fully supports it)
one more thing, Hardlock32 is from safe-key not Chingachguk...also your attached 70D5.rar and 28885.rar are the same ????

WinDDK you can find it in M$ offical site...

Regards
___________
cEnginEEr

[foffa]

also the new hlmon from brstudio
cant be converted
you can use universal hasp emulator a002
and you can convert the dump to reg

it is ok not a big deal

also you take with the master cEnginEEr advice and use haspemul2007 to make it work

if the master said it work sure it will work

[Softlock]

Thanks thanks thanks.......
you people have crazy brains...
I salute the spirit....


Hi,


I last posted the bin file which was from HaspHL2008...(master u caught me by neck!!!)
(http://hardlock.pbwiki.com/f/hasp.rar)
I tied to use our Edge solver (both edge and new edgespro) for this file...

but i was only able to see the following screen for hours...

http://hardlock.pbwiki.com/f/edgespro.JPG

but the result was *.dng file with size 0kb...

where am i gone wrong? will edge tool take more than an hour?

@ foffa : I had tried Hasp_Emulator_a002 also....

but when i tried to grab the dump after getting the modadd (after running the protected program and stopping)
the Hasp_Emulator give the following error message..

http://hardlock.pbwiki.com/f/HaspEmulPE.JPG
i spend a lot of time to get over it....
any idea????

[foffa]

befor using universal hasp
remove haspemul drivers

and install orginal hasp drivers again
and install universal hasp also again
then try

[Softlock]

befor using universal hasp
remove haspemul drivers

and install orginal hasp drivers again
and install universal hasp also again
then try

Dear foffa..

I am working with the same software which i am trying to emulate...
so every time after my failed attempt with universal hasp(error as shown in my above post), i will install the orginal driver to get back to my normal works with the software..
So most of the time i start the universal hasp with the original hardlock drivers..

and as u said, if i start without reinstalling the orginal one, i will get struk with the same message at the first step itself...
but i am really worried with this error when i press "grab the dump".

[register]

hi soft lock

how to create .bin file from .dat file

please help me

thanks

[Softlock]

Many thanks for master and foffa....
long live u both...

i am wondering, how people can be so genius like u....


Yes, with your valuable guidance, I did it!!!!!
It’s amazing...... its working.... unbelievable....
What I heard about hardlock are all old stories now...

The post I send about Edgetool yesterday was the story in my PC only..
I tried in another PC to get the *.bin file and the corresponding *.dng files
and the remaining work was easy as anything....



PRODUCT DESCRIPTION
SoftKey Solutions HASP/Hardlock Emulator 2007
Well this release is something special, cEnginEEr and Team EDGE joined forces to do this one.




@ cEnginEEr : U r great....

Basically am not a Computer Engg… so all the codes where hard to digest for me….
But I keep on trying until u both extended ur help…

Then how come u r giving it for free, after spending a lot valuable time, hardwork and ofcourse giving a tough time for ur sharp brain…

My whole hearted wishes for u…. Hats off…

[Softlock]

hi soft lock

how to create .bin file from .dat file

please help me

thanks

What I like to say is, use SoftKey.Solutions.HASP.Hardlock.Emulator.2007-EDGE..
Which was the one worked for me…
I don’t know I can upload it in the forum (see the rules of the forum for junior members) and also with out the permission of the creator of this software…
If u can get sanction from them (sure u can get, they are all helpful), I will upload it….
or search this tool in the forum or web (as I did, u will get.. do the hardwork from ur part…)
I think SoftKey.Solutions.HASP.Hardlock.Emulator.2007-EDGE is the full package u needed if ur dongle is hasp or hardlock…

But if u still wants to emulate from dat file… upload it in the forum so that experts can have a look on it…

[papi]

normally we want converter dat2bin :)

[foffa]

S0ftL0cK

you are talking so nice

but look my name cant be mentioned beside cengineer
he is the master
i am nothing for him
i just understand how things goes
that is all
have a nice day all
@papi
i think that dat and reg cannot be converted to bin

other wise you can dump using haspemul from another emulator;)

[Softlock]

Hi..

@ foffa: I am happy that you also tried to help me...
Also i didnt mean to compare you with any one...
and in other hand cEnginEEr, he had made the tool, and still he has the mind to helping all those in trouble in this field...
I know the word "thanks" is not enough for all these..

Anyway..
I just want to know where all are the changes due to patching with SoftKey.Solutions.HASP.Hardlock.Emulator.2007-EDGE.
In system drivers, registry????
I had found two new files in system driver folder XHASP.sys and *.bin

what all are the other changes??
can i just copy this to the corresponding location in another system to make it work the protected programe in that system without dongle???


:rolleyes: :rolleyes: :rolleyes: :rolleyes:

[papi]

in dump folder that you attach this regs are that you try to put in registry other reg like harmer emul and reg file that you dump with hl-dump. This regs cant help you to such thinks :)

Try to find in registry XHASP :)

Regards

[foffa]

haspemul as i think is a gui tool to manage the xhasp service

and as i think haspemul generates different id for each pc
so you cant use its keys to makle it work with another pc
:)

[kiki]

you right foffa, haspemul is just a gui tool to manage the service, the emul itself is xhasp.sys

[foffa]

xhasp.sys
:) :)

[cEnginEEr]

well, I'm a little late for this thread, just wanted make one point clear here: when U load a dng file into emulator, it will save it in \\driver\nnnnnnnn.bin file, the file's name differs from a computer to computer, it is based on the ID of it so you just can not copy and use it in another PC...

have phun

[Softlock]

....when U load a dng file into emulator, it will save it in \\driver\nnnnnnnn.bin file....

Thanks very much for the info...

And let me confirm that the only change made by HaspHL2007 on the PC is \\driver\nnnnnnnn.bin and XHASP.sys... and not any changes in registery...??

(Just for my curiosity and to understand the system)

[cEnginEEr]

U're right.

[uel888]

cEngineer

I have the same problem with zestea.

I install a SW looking for a dongle , I run HASP2007 and continue its automatic installation but it was still looking for a license file for my computer.


I'd ask my co-worker and told me that I must ask a license file from the SW company before I can run it in my PC.

Pls.see attached dump running succesfully with HASP2007.
http://rapidshare.com/files/69613627/45677960.dmp

[ccw23a]

QESTION:

does HASPHL2007/2008 support nethasp with EDStruct?
because with SoftKey.Solutions.HASP.Hardlock.Emulator.2007, it managed to solved it and produced *.dng file but i just won't run. dongle not found.

the strange thing is that:
with HASP Emulator PE V2.33, and generated dump file n converted to *.reg by using DMP2REG_EDS_1.5.exe manages to run flawlessly.

when i compare the hasp id n password, both are same but HASPHL2007/2008 simply won't work.

if someone wanna do study abt it, i am happy to forward you to make a study abt it.

[area511]

Many thanks for master and foffa....
long live u both...

i am wondering, how people can be so genius like u....


Yes, with your valuable guidance, I did it!!!!!

I have the same problems like you - can you tell me how you made it working?

Thanks

[Softlock]

Dear friend,

can u please explain what exactly is the problem???

any way try this HASPHL2007 and edge, and get back to the forum with the result..

dongle.zip

Thanks

[bern]

Hi cEnginEEr,

recently I dump one nethasp dongle by using HASPHL2007, after that i convert .dmp file to .dng file by using edghasp and load it but the software doesnt work. why? Did i make mistake? Thank.

[argenmarce]

Hi cEnginEEr,

I think I have the same problem that softlock had. I saw that you help him, but I missed how.
I created the a file named hl51F4.bin with HASPHL2007.exe, the size is 8400 bytes.
When I tried to generate the *.dng file with edgehasp.exe, I get the same message:

Reading...
Decrypting...
Solving...

for hours. The size of the resulting *.dng fille is 0 bytes.

What am I doing wrong?

Also I have another question, in windows Vista the HASPHL2007.exe doesn't work when I press the start service button. I get: ERROR 1275

please help me, I'm a big fan of you.

(sorry for my english, I'm an argentinian learning your lenguage)

[oooo12]

I have dumped hasp4 net (not hasp3, not hardlock) dongle for 50 users by hasphl2007 dumper, then converted it to reg file by Hdmp2reg, loaded into hasphl2007 emulator.
And have checked net status by hasp_demo32 utility, and have seen that there are 0 users, instead of 50 users in real dongle.
What is to change in dmp or reg file to get 50 users with this dump.
And one more interesting: if to change type of key in reg file to hasp3 generation, it is possible to look at 50 users, but in the same time, it has not already hasp4 gen dongle.

[eng-ars]

Hi friends... I have some question to experts... First... How Do I to know kind of my Dongle.. ? Hasp HL, Sentinel, Hardlock... etc.. etc.. They are USB but the external identification is not visible
Second... I have a Dongle and soft and a key USB black color... It's a Engineering soft... and i don't know what kind emulator must use..
Third ... I have a soft via network... the dongle is Nethasp and is not connected to my machine... IS possible the dump ?
forth .... I have a memohasp-1 and used the hasphl2007 with edge tool... and it give me a file called (Hasphl2007) 1cf95c83.dmp that weight 737 bytes.... what do i do ?

uff excuse me.. really i'm hopeless with HASP HL... but i continue looking for

Thank you

[fejkus]

the error with hasp emul (from my experience) appear only on processor 64 bit. on 32 bit processor i didn't notice this error.

but i am affraid, that glasha emul is not good for hardlock (tested on two keys, flora and luna asic.) Vusb is good solution, but only for Luna asic. With my Flora i wasn't successfull - probably i am making mistake somewhere.


Thanks thanks thanks.......
you people have crazy brains...
I salute the spirit....


Hi,


I last posted the bin file which was from HaspHL2008...(master u caught me by neck!!!)
(http://hardlock.pbwiki.com/f/hasp.rar)
I tied to use our Edge solver (both edge and new edgespro) for this file...

but i was only able to see the following screen for hours...

http://hardlock.pbwiki.com/f/edgespro.JPG

but the result was *.dng file with size 0kb...

where am i gone wrong? will edge tool take more than an hour?

@ foffa : I had tried Hasp_Emulator_a002 also....

but when i tried to grab the dump after getting the modadd (after running the protected program and stopping)
the Hasp_Emulator give the following error message..

http://hardlock.pbwiki.com/f/HaspEmulPE.JPG
i spend a lot of time to get over it....
any idea????

[souze_villy]

the error with hasp emul (from my experience) appear only on processor 64 bit. on 32 bit processor i didn't notice this error.

but i am affraid, that glasha emul is not good for hardlock (tested on two keys, flora and luna asic.) Vusb is good solution, but only for Luna asic. With my Flora i wasn't successfull - probably i am making mistake somewhere.
vusbbus for hardlock working with both (luna asic and Flora asic), I emulate many software for luna and flora and all is good working.

[justine]

@souze_villy

can you post here your vusbbus hardlock emul that works with flora/luna both

vusbbus for hardlock that i have cannot work with flora

regards

[souze_villy]

@souze_villy

can you post here your vusbbus hardlock emul that works with flora/luna both

vusbbus for hardlock that i have cannot work with flora

regards
send me flora asic dump, I make it and share.

[miles1234]

Hi cEnginEEr;

I'm desperately trying to make the HASPHL work.
I read dozens of post, I did not manage to make it work.
Via HASPHL2007 I managed to create a dmp, via edge to ol I get a dng. I import it again on HASPHL, the emulator TAB recognize the license... All this is OK.
But "I have dongle not present" when I launch the SW.:confused:
Do I need to run a kind of emultor? (vusbbus) What do I have to do after that?

Thanks in advance...

[Trit0n]

I have now 3 versions of the vusbbus Hardlock Emulator
1st the normal Emulator (09.09.07 45 KB)
2nd MODAD 2366 only = LUNA
3rd MODAD 73DF only = FLORA

But none of them really works with FLORA ASIC.

I test it with "RefKey" and "VerKey" (with Aladdin Latteccino) and none of them really creates the right Key (Testet with an other FLORA MODAD with a known RefKey/ VerKey and Seed-Codes)

Is there another Vusbbus HL EMU ?? And it really works with flora ??
- I Can't believe it !!

[souze_villy]

I have now 3 versions of the vusbbus Hardlock Emulator
1st the normal Emulator (09.09.07 45 KB)
2nd MODAD 2366 only = LUNA
3rd MODAD 73DF only = FLORA

But none of them really works with FLORA ASIC.

I test it with "RefKey" and "VerKey" (with Aladdin Latteccino) and none of them really creates the right Key (Testet with an other FLORA MODAD with a known RefKey/ VerKey and Seed-Codes)

Is there another Vusbbus HL EMU ?? And it really works with flora ??
- I Can't believe it !!
I attached here Multikey_emulator he is working with (Hasp4, HaspHL, Hardlock Flora Asic and Hardlock Luna Asic). I check it 100% good working.

For HaspHL using must Dongle Type is "DongleType"=dword:00000001
For Hardlock using must Dongle Type is "DongleType"=dword:00000002

If you are not make the emul send me dmp I make it.

Regards

[benito]

I tied this emu some times ago on Vista32 sp1 and work only hardlock, not hasp.

[souze_villy]

I tied this emu some times ago on Vista32 sp1 and work only hardlock, not hasp.

you read my post he must working with both if dongle type is
"00000001" for hasphl and you look your reg must u wrote the dongle type is "00000002" and this is for hardlock. I using it already and he is multi emulator. Read emulator (reg) files agian.

[benito]

You didnt write anything about OS under you tried it.
I used default regfiles from author, these should be ok.

[souze_villy]

You didnt write anything about OS under you tried it.
I used default regfiles from author, these should be ok.

However, Emulator is perfect working in any vista 32 bit (hasphl + Hardlock).

[y8y8y8y]

2Benito:
The base for this Multi Emulator was Hasp Vusbbus emulator that we all used up to now. On a way elite_r added the Hardlock to that emulator and may be in a future will add Sentinel support as well.

[benito]

2Benito:
The base for this Multi Emulator was Hasp Vusbbus emulator that we all used up to now. On a way elite_r added the Hardlock to that emulator and may be in a future will add Sentinel support as well.

Heh, how can you know what version of vusbbus i use? I use another version then you all...
I just tried multikey emu from elite_r under Vista32 and in my case work only hardlock...

[souze_villy]

Heh, how can you know what version of vusbbus i use? I use another version then you all...
I just tried multikey emu from elite_r under Vista32 and in my case work only hardlock...
100% I agree with y8y8y8y, multikey emulator is hasphl and extra modified for hardlock too.

[souze_villy]

If any body wan to use two software and install one emulator then it is possible. Here I wrote some Comments Please follow it. Red mark dongle type 1 is hasphl and dongle type 2 is for hardlock.

Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\MultiK ey\Dumps\12345604]
"Name"="Hasp HL"
"Copyright"=""
"Created"=""
"DongleType"=dword:00000001
"SN"=dword:12345678
"Type"=dword:000000EA
"Memory"=dword:00000020
"SecTable"=hex:00 00 00 00 00 00 00 00
"NetMemory"=hex:03,00,0F,D0,02,00,00,00,FF,FF,FE,FF
"Option"=hex:00,01,02,4A,1F,01,0A,0A,07,01,0C,32,2E,00
"Data"=hex:\


Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\MultiK ey\Dumps\0000XXXX]
"DongleType"=dword:00000002
"ID"=dword:XXXXXXXX
"withMemory"=dword:00000001
"Seed1"=dword:0000XXXX
"Seed2"=dword:0000XXXX
"Seed3"=dword:0000XXXX
"HlkMemory"=hex:\

[y8y8y8y]

Heh, how can you know what version of vusbbus i use? I use another version then you all...
I just tried multikey emu from elite_r under Vista32 and in my case work only hardlock...

I did not mean specifically you, I mean public version ( and yes, there is many version as well).

P.S.

This emulator can emulate Hardlocks with same Modad, just in REG path add at the end of Modad any char, like this:
Modad: 1234
First:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\MultiK ey\Dumps\00001234]
Second:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\MultiK ey\Dumps\00001234a]
Third:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\MultiK ey\Dumps\00001234b]

[souze_villy]

I did not mean specifically you, I mean public version ( and yes, there is many version as well).

P.S.

This emulator can emulate Hardlocks with same Modad, just in REG path add at the end of Modad any char, like this:
Modad: 1234
First:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\MultiK ey\Dumps\00001234]
Second:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\MultiK ey\Dumps\00001234a]
Third:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\MultiK ey\Dumps\00001234b]
also use the
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\MultiK ey\Dumps\00001234b]
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\MultiK ey\Dumps\00001234b-]
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\MultiK ey\Dumps\00001234b+]

[y8y8y8y]

also use the
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\MultiK ey\Dumps\00001234b]
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\MultiK ey\Dumps\00001234b-]
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\MultiK ey\Dumps\00001234b+]

The idea is to add any character after modad, no mater what.:rolleyes:

[Trit0n]

In my work environment the MultiKey EMU don't work.
(WinXP and Hardlock Flora)
The reason could be the: "GetKey and VerKey" are not implemented. (Or not properly implemented)
To other environments, I can not say anything.

[souze_villy]

In my work environment the MultiKey EMU don't work.
(WinXP and Hardlock Flora)
The reason could be the: "GetKey and VerKey" are not implemented. (Or not properly implemented)
To other environments, I can not say anything.
why you are not understand this is that SEED is mostly importan for it, send me dmp with (http://nodongle.biz/files/hlapi.zip) I make the reg file and define u how to make it. But understand it MultiKey EMU need
SEED1
SEED2
SEED3
then working with seeds without seeds not working.

[geophylika]

why you are not understand this is that SEED is mostly importan for it, send me dmp with (http://nodongle.biz/files/hlapi.zip) I make the reg file and define u how to make it. But understand it MultiKey EMU need
SEED1
SEED2
SEED3
then working with seeds without seeds not working.


hi
dump use wich software to create .reg file????

[zeko1905]

Hi Everyone,

I have a problem. I got the original file hardlock dump from the DNG file and then I got the edge but to say, despite my fullLicense software HASPHL2008 time was up and says how the licensee can solve, please help

[zeko1905]

Herkese merhaba ,

Benim bir sorunum var . Ben orjinal hardlock dan dump dosyasını aldım ardından edge ile dng dosyası aldım fakat HASPHL2008 fullLicense demesine rağmen benim software çalıştırdığımda licensenin zamanı geçmiştir diyor nasıl çözebilirim lütfe yardım

[kodyazan]

@zeko1905, for hardlock,

A compressed info:

make a dump with sp0raw's hl-dump.exe (learn modad with toro's monitor if you dont already know.) Use vusbbus emulator.

Search this forum and complete the rest of the puzzle.

Kolay gelsin.