Problem to load the dng file create by Edgehasp

[bern]

hi all,

I got one problem with loading the dng file which create by Edgehasp. When i use HASPHL2007 to load the file my pc will restart again. why like this? I attact here the bin file and dng file.
Thank.

[cEnginEEr]

well, I will help you with this one and I hope you won't come back with tones of complains about BOSD etc; I tested my own dng file on my computer with no problem and dumped the emulated dongle with sporaw's dumper, the result is included as well;

D:\>hldmp2dng hl15d3.bin
HLDmp2Dng convertor for HASPHL2007 v1.02 - Hardlock
(c) 2007 cEnginEEr, [ XXXXXXXXXXXXXXXXX ]

> Reading...
> ModAd=15D3, HardlockID=FFFFFFFF
> Solving algo... Seed1=D2D1, Seed2=20F7, Seed3=3E8B
> File 15D3.dng successfuly created...

D:\>cd hl-dump

D:\hl-dump>hl-dump
Aladdin's HardLock E-Y-E Memory/Algorithm Data Dumper (HL-DUMP) v2.1
(c) 2003-06, Sp0Raw // RDW, nikita@work [ sp0raw@mail.ru ] http://www.sporaw.ru

No arguments were given. Use "/?" command if you want to see help screen.

Decimal or hexadecimal numbers supported only (for example: 23166 or 0x5A7E).
MODAD "????h" must be provided as "0x????" format (i.e. 2492h -> 0x2492).

Enter MODAD to access your dongle (or press <ENTER> to exit): 0x15d3

Dumping key using MODAD = 15D3h (5587).
HardLock API version: 383
Local device connected.
[Remote] port: 378h
Chip type: Luna ASIC (new revision)
Memory detected... Memory dumped.
Dumping Anti-Collision data (high level)... Done.
Dumping Anti-Collision data (low level)... Done.
Dumping Algorithm Data... 100%
Writing dump to registry file...
Input your description for this dump (or press <ENTER> to skip):

Done.
Writing dump to binary file... Done.

[bern]

Hi cEnginEEr,

Thank for helping, my problem still the same, when i load the dng file with HASPHL2007 my pc will restrat again, when i load with HASPHL2008 it say " Please upgrade ur dongle file". Is that my pc got problem? Is that related to this file " xhasp.sys" ? Because before my pc restart, i say the screen shown this file name. Thank.

[bern]

Thank cEnginEEr. I got it....just replace the XHASP.sys file.

[yeniceli]

@cEnginEEr
where is "hldmp2dng convertor" program. ı cant find this program? upload your program pls.
thanx

[3xduc]

To Bern and cEnginEEr,

I faced an exactly same problem. My dongle is also of Luna ASIC type.
I can use EDGE to make a .dng file, but when loading in HASPHL2008 it said 'need updated'. When loading it in HASPHL2007 the screen turn blue. And I also found a xhasp.sys file in system32/driver.

Could you tell me how you dealt with this .sys file?
Thanks a lot.
3xduc.

[3xduc]

Hi all,
Now, I knew how to update the driver of HASPHL2007: Just move the xhasp.sys out and restart the 2007 emul, the new .sys file will be auto created.
Now for my case, loading the .dng file is OK but when I load the software, it popped up an error message of dongle.

Is it true that Edge tool can not solve Luna Asic type?
I 'm sure and believe that for my dongle there is a way to convert .bin file to .dng file to emulate the software with hasphl2007, but I do not have such a tool :(

Regarding using safe-key tool, Now I only have a 10KB and 24KB version, both are invalid :(
Can anyone help me with a good version of hardlock.sys?

[hasperko]

Hi there,

how can I deal with HaspHL2007 when it needs an "Update Code" to start the service? I was that stupid to uninstall the driver for some stupid reason and now I cannot run it again. I've searched for any files in the system folders or values in the registry that may be holding info but nothingg helped.

any help will be highly appreciated.

[fejkus]

Hi Cengineer,

i would like to ask you for some help. i noticed in forum, that you have different convertor for hardlock key for HASPHL2007.

Can you for me make a dng file? Edge solution dont convert bin file ... shows no error, status is solving ... but after two days didnt finished.

bin file and sporaws dat file are here:

http://rapidshare.com/files/95450334/hl6C9F.rar.html

It's harlock flora asic, i have already tried vusb emulator and safekeys. both working, flora hardlock key is presented, but licence number generated from key don't corespond to licence number.

last emulator that i have (and want to try) is hasphl2007.

it will be great, if you find some time to convert bin file to dgn file.

if there is anything missing for conversion, please PM me.

Thanks for your time.


well, I will help you with this one and I hope you won't come back with tones of complains about BOSD etc; I tested my own dng file on my computer with no problem and dumped the emulated dongle with sporaw's dumper, the result is included as well;

D:\>hldmp2dng hl15d3.bin
HLDmp2Dng convertor for HASPHL2007 v1.02 - Hardlock
(c) 2007 cEnginEEr, [ XXXXXXXXXXXXXXXXX ]

> Reading...
> ModAd=15D3, HardlockID=FFFFFFFF
> Solving algo... Seed1=D2D1, Seed2=20F7, Seed3=3E8B
> File 15D3.dng successfuly created...

D:\>cd hl-dump

D:\hl-dump>hl-dump
Aladdin's HardLock E-Y-E Memory/Algorithm Data Dumper (HL-DUMP) v2.1
(c) 2003-06, Sp0Raw // RDW, nikita@work [ sp0raw@mail.ru ] http://www.sporaw.ru

No arguments were given. Use "/?" command if you want to see help screen.

Decimal or hexadecimal numbers supported only (for example: 23166 or 0x5A7E).
MODAD "????h" must be provided as "0x????" format (i.e. 2492h -> 0x2492).

Enter MODAD to access your dongle (or press <ENTER> to exit): 0x15d3

Dumping key using MODAD = 15D3h (5587).
HardLock API version: 383
Local device connected.
[Remote] port: 378h
Chip type: Luna ASIC (new revision)
Memory detected... Memory dumped.
Dumping Anti-Collision data (high level)... Done.
Dumping Anti-Collision data (low level)... Done.
Dumping Algorithm Data... 100%
Writing dump to registry file...
Input your description for this dump (or press <ENTER> to skip):

Done.
Writing dump to binary file... Done.

[gelar]

Hi Cengineer,

i would like to ask you for some help. i noticed in forum, that you have different convertor for hardlock key for HASPHL2007.

Can you for me make a dng file? Edge solution dont convert bin file ... shows no error, status is solving ... but after two days didnt finished.

bin file and sporaws dat file are here:

http://rapidshare.com/files/98888146/54E8.rar.html

Thanks

[Trit0n]

This Dongel will be a HARDLOCK not HASP
Dump it with HASPHl-2007, you will get a Dump (HL54E8.bin) with 8400 bytes
then use Edgehasp.exe or Edgespro11.exe with THE HL-TAB (NOT HASP TAP) and all is ok.
(Else Share the HL54e8.bin and i will do it for you)

[BfoX]

@gelar:
New dongle Seed1 = 5965 Seed2 = 67e0 Seed3 = f01a

[tricking]

I'm trying to dump my HASP HL with HASPHL2007 but I can't see the HASP in the Dumper window. Maybe the cause of this problem is that a few month ago, I unistalled the drivers of HASPHL2007. But if I use the HASPHL2008 I can see the HASP and I can generate the DMP file. But when I use the edgehasp I can't generate the DNG file because the size of this file is different. For me this is ok, because they are different version and generate different files.

But my problem come when I used the HASPHL2007 with the XHASP.sys of the 2008 version. I'm able to see the HASP and generate the DMP file and also able to generate the DNG file but when when I try to use the software I can't.

Can somebody explain me how can I solve this?

[y8y8y8y]

I'm trying to dump my HASP HL with HASPHL2007 but I can't see the HASP in the Dumper window. Maybe the cause of this problem is that a few month ago, I unistalled the drivers of HASPHL2007. But if I use the HASPHL2008 I can see the HASP and I can generate the DMP file. But when I use the edgehasp I can't generate the DNG file because the size of this file is different. For me this is ok, because they are different version and generate different files.

But my problem come when I used the HASPHL2007 with the XHASP.sys of the 2008 version. I'm able to see the HASP and generate the DMP file and also able to generate the DNG file but when when I try to use the software I can't.

Can somebody explain me how can I solve this?

What is the type of dongle?
Edgehasp will not work with 2008 version, only with 2007.
If it's has hl or hasp4 you can use TORO monitor and vusbbus emulator or glasha (depend on dongle type)

[tricking]

I have a HASP HL.

Can you tell me why I can see my HASP in the 2007 version using the driver of the 2008 but not if I use the 2007 drivers?

[y8y8y8y]

Try to uninstall all hasp drivers and install fresh copy of hasp driver.
If you have any other emulators in system, uninstall them too.

In any case if it's hasp hl with hl functions you cannot emulate it with HASPHL2007. In HASPHL2007 HL stand for hadrdlock and not for hasp hl

[webcrk]

http://www.zshare.net/download/106173434489d4dc/

this is .reg and .dat files

[Trit0n]

Try to use SafeKey Emulator with this Seeds:
Seed1=0x5F03, Seed2=0x175C, Seed3=0xF169
or use HASPHL2007 EDGE
Serach Forum for Infos and Links

[webcrk]

hello
man. i have tried before, but without succeed
please help

[gelar]

hello
man. i have tried before, but without succeed
please help

Try Use Vbus...

[Trit0n]

@ Webcrk
Use HASPHL2007 and Dump your Dongle, you will get a Dump HL6A33.BIN.
Then use the EDGEHASP.EXE an Try to get the .DNG from HL6A33.BIN
(Use The HASP-HL TAB not HASP Tab)
If you get it (with Size 5 KB) then load it in HASPHL2007
(Your Dongle is LUNA and HASPHL2007 should be Work with this Dongle)

[amine76]

C:>hl\hldmp2dng hl6A33.bin
HLDmp2Dng convertor for HASPHL2007 v1.02 - Hardlock
(c) 2007 cEnginEEr, [ http://www.reteam.org ]

> Reading...
> ModAd=6A33, HardlockID=00000000
> Solving algo... Seed1=5F03, Seed2=175C, Seed3=D34B
> File 6A33.dng successfuly created...

D:\cd hardlock

D:\Hardlock>hl-dump
Aladdin's HardLock E-Y-E Memory/Algorithm Data Dumper (HL-DUMP) v2.1
(c) 2003-06, Sp0Raw // RDW, nikita@work [ sp0raw@mail.ru ] http://www.sporaw.ru

No arguments were given. Use "/?" command if you want to see help screen.

Decimal or hexadecimal numbers supported only (for example: 23166 or 0x5A7E).
MODAD "????h" must be provided as "0x????" format (i.e. 2492h -> 0x2492).

Enter MODAD to access your dongle (or press <ENTER> to exit): 0x6A33

Dumping key using MODAD = 6A33h (27187).
HardLock API version: 383
Local device connected.
USB device detected.
Dongle ID: XXXXXXXXh (xxxxxx).
Chip type: Luna ASIC (new revision)
Memory detected... Memory dumped.
Dumping Anti-Collision data (high level)... Done.
Dumping Anti-Collision data (low level)... Done.
Dumping Algorithm Data... 100%
Writing dump to registry file...
Input your description for this dump (or press <ENTER> to skip):
6A33
Done.
Writing dump to binary file... Done.

[amine76]

D:\dogii\Hardlock>hl-dump
Aladdin's HardLock E-Y-E Memory/Algorithm Data Dumper (HL-DUMP) v2.1
(c) 2003-06, Sp0Raw // RDW, nikita@work [ sp0raw@mail.ru ] http://www.sporaw.ru

No arguments were given. Use "/?" command if you want to see help screen.

Decimal or hexadecimal numbers supported only (for example: 23166 or 0x5A7E).
MODAD "????h" must be provided as "0x????" format (i.e. 2492h -> 0x2492).

Enter MODAD to access your dongle (or press <ENTER> to exit): 0x6A33

Dumping key using MODAD = 6A33h (27187).
HardLock API version: 383
Local device connected.
USB device detected.
Dongle ID: 000E0000h (917504).
Chip type: Luna ASIC (new revision)
Memory detected... Memory dumped.
Dumping Anti-Collision data (high level)... Done.
Dumping Anti-Collision data (low level)... Done.
Dumping Algorithm Data... 100%
Writing dump to registry file...
Input your description for this dump (or press <ENTER> to skip):
6A33_Dongle
Done.
Writing dump to binary file... Done.

[unforgiven]

Attention to all member
amine76 is a cheater.
Don't try to any tool exchange with him.
Don't pay any money for tool or emu to him.
Don't trust him
He cheated me in tool exchange:(

[amine76]

I have discovred that Unforgiven have a lot of tools and sources stolen for a lot of authors without authorization, and this is not the objectif of this forum.
Unforgeven Say what you want ? I have told you that i wait the authorization from the author.

Here is a dng :
http://rapidshare.com/files/114709398/6A33.rar
http://rapidshare.com/files/114729604/ss6A33.rar
Enjoy.

[unforgiven]

Hmmmm
Seems again we have big cheater!!!
Me and Chingachguk have a some work for sentinel
Dump algo solver (sporaw-Pva_....) and we made a algo solver (i have source of algo solver ) and amine76 told to me he can exchange this tools with hldmp2dng 1.02 but after i send algo solver He didn't send to me hldmp2dng 1.02.
Also i have a pm from 2 guys with this problem.
Many people in board know me and i tried help them for free.
Also in board user ngokson and papi can agreed the algo solver
created by me and chinga.

[benito]

Hmmmm
Seems again we have big cheater!!!
Me and Chingachguk have a some work for sentinel
Dump algo solver (sporaw-Pva_....) and we made a algo solver (i have source of algo solver ) and amine76 told to me he can exchange this tools with hldmp2dng 1.02 but after i send algo solver He didn't send to me hldmp2dng 1.02.
Also i have a pm from 2 guys with this problem.
Many people in board know me and i tried help them for free.
Also in board user ngokson and papi can agreed the algo solver
created by me and chinga.

I trust you unforgiven. I think i can speak for other members if i tell we dont want members like amine here. Admins should do something with this. At least ban this user. Its my opinion.

BR

[amine76]

We know all that the master of this solver is tch2000 from russian board, and you know that I can emulate ssp without this tool, i am new in this forum and I have some experience with dongle emulating, I want to exchange my idea with other members, unforgiven have more than 1000 dumps to exchange its stupid, all dumps are private, exept educational purpose only, he say he help member for free !! why he want exchange ?! if he is really the author of a solver, he can write a hldmp2dng tool himself !! and share for all members.

[amine76]

This Dongel will be a HARDLOCK not HASP
Dump it with HASPHl-2007, you will get a Dump (HL54E8.bin) with 8400 bytes
then use Edgehasp.exe or Edgespro11.exe with THE HL-TAB (NOT HASP TAP) and all is ok.
(Else Share the HL54e8.bin and i will do it for you)

here is : http://rapidshare.com/files/114733415/ss54E8.rar
http://rapidshare.com/files/114733471/54E8.rar

[amine76]

Hi Cengineer,

i would like to ask you for some help. i noticed in forum, that you have different convertor for hardlock key for HASPHL2007.

Can you for me make a dng file? Edge solution dont convert bin file ... shows no error, status is solving ... but after two days didnt finished.

bin file and sporaws dat file are here:

http://rapidshare.com/files/98888146/54E8.rar.html

Thanks

here is what you want :

Solving algo... Seed1=5965, Seed2=67E0, Seed3=D238

http://rapidshare.com/files/114733471/54E8.rar
http://rapidshare.com/files/114733415/ss54E8.rar

Good luck

[gelar]

here is what you want :

Solving algo... Seed1=5965, Seed2=67E0, Seed3=D238

http://rapidshare.com/files/114733471/54E8.rar
http://rapidshare.com/files/114733415/ss54E8.rar

Good luck

thanks alot, i take that. but i has solve that problem my self.
in my case Solving algo... Seed1=5965, Seed2=67E0, Seed3=f01a
im generate seed with hl-solver
has different to calculate seed with UniDumpToReg. and my s/w running well by hl-solver seeds
maybe you can help me to share sentinel LM SDK 8.x.x. ;)

BR

[amine76]

thanks alot, i take that. but i has solve that problem my self.
in my case Solving algo... Seed1=5965, Seed2=67E0, Seed3=f01a
im generate seed with hl-solver
has different to calculate seed with UniDumpToReg. and my s/w running well by hl-solver seeds
maybe you can help me to share sentinel LM SDK 8.x.x. ;)

BR

Good :) for sentinel LM SDK i will search for you, now I have Flexlm SDK 11.4 and Flexlm 9.2

[papi]

Hmmmm
Also in board user ngokson and papi can agreed the algo solver
created by me and chinga.

I really dont kno whats happen here?
Can anyone explain here why my name is here??????
:confused:

[y8y8y8y]

I really dont kno whats happen here?
Can anyone explain here why my name is here??????
:confused:

There is some bad blood between amine76 and unforgiven.

[papi]

Really dont know who is Amine???
Unforgiven is master for sentinel etc...

Amine76
Need more things to do in this forum to see your trueface.

[gelar]

Good :) for sentinel LM SDK i will search for you, now I have Flexlm SDK 11.4 and Flexlm 9.2

ok, can you share that tools ? and how about sentinel LM SDK ?
Thanks

[amine76]

ok, can you share that tools ? and how about sentinel LM SDK ?
Thanks
I dont know if i can share it now, for SentinelLm,I try to share it soon.

[ngoksun]

I really dont kno whats happen here?
Can anyone explain here why my name is here??????
:confused:
Me too. :confused:

[benito]

What the hell :)
It is new version of sentemul or some old version ?

[amine76]

What the hell :)
It is new version of sentemul or some old version ?

Yes its small, maybe a private emulator :p

[benito]

and the edges keygen work with this one ?

[amine76]

and the edges keygen work with this one ?

Yes of course ! maybe that someone has changed the look of SENTEMUL2007 with some tool like reshacker, we see that date an hour havn't changed.

The licence :
B40F581CAD23B318CE19F59FAB4F024C1873015E63E679B831 608BBD705897E56588C39BB15794A5076945712D34C44A61DA
2352C88388F32AD9AE2A2E52DF2D work until 2010.

[amine76]

Try this : http://www.filefactory.com/file/860ab1/

Expiry (d/m/y): 01/07/2008
Last Used (d/m/y): 01/06/2008

[zhjd]

Good :) for sentinel LM SDK i will search for you, now I have Flexlm SDK 11.4 and Flexlm 9.2
waiting for you share the sdk 8.0.BTW,i can not catch the vendor ID use slmdec103.if nead, i can share the license file.

[punteroster]

I have a problem with a dongle LPT, logresacar aladin half of the 46E5216E.dmp a file, but when you resuerbo with edgehasp, creates the file DNG but the program does not accept the license and twelve reconose not leave, this dongle
controlling three programs

[moses]

Hi! cEnginEEr
I've the same problem. I've dumped the Hardlock dongle which is a Luna ASIC, with Edge Hasp 2007 and got a hlXXXX.bin file(8400bytes). Now I tried the Edge Solver to get the *.dng file, but it says "...Decrypting, solving..." etc and stops here itself without any indication of error or success in creating the *.dng. Result is a *.dng file with 0 bytes size. How can I get the *.dng?
Please help me I'm stuck here!!!

Thanks!

[phods]

i created .bin with HASPHL2008, but I can not generate the. DNG, I tried several tools, the EDGE says that . bin size , is wrong.
and now?

thanks

[benito]

Again and again...I am tired that users cant even use search button!
Edges solver cant support new version of HASPHL2008. If you need convert it contact neobit.org, they will convert it, of course not for free...

[phods]

thanks man
i'm a really noob..

but using that 2007 version, works..

thanks very much

[Atys]

Hi everyone!

I was dumping today an aladdin usb hardlock dongle with HASPHL2007 and i got a dump file with 8400 bytes.
Then i solved with edge 2007, got a .dng in the size of 4856 bytes.

But, the dng looks like as it had been sliced in the middle compared to other .dngs i creater before, and the emulation doesnt works.

Older .dng's having the structure of: Some code -some data repeated X times (most part of the file) - some code - EOF.

This one looks like: Some code - some data (sliced in the middle) - EOF.

Is there any workaround for this problem?

(I also noticed that i was dumping the dongle 2 times and i got 2 different dumps. I can't decide if hasphl2007 does encrypt the dumps (because hl-dump looks more raw) or is there any new dongles from aladdin (don't think so).

ty, Regards

Atys