View Full Version : Emulating Hasp HL max
Prenumele Numele
11-26-2008, 10:50 AM
New link is here. (hxxp://rapidshare.com/files/167313818/Reg_and_Dmp.rar.html)
One thing I forgot to mention was that when I start the software it throws an error saying the usb key was not found. From what I understand, at some point after I install the vusbbus.sys file, a 'New hardware has been detected' box should pop up. This has not happened.
please reupload on www.rapidshare.de cause .com limit downloads to 10
bloodlust026
11-26-2008, 11:18 AM
Once again. (hxxp://rapidshare.de/files/41001632/Reg_and_Dmp.rar.html)
Thanks for that link.
Here is the entire log from sat monitor. I've opened every menu and enabled every option and still only two crypt pairs exist. I see multiple hasp types in this log (ie - Hasp HL, Hasp HL Basic, Hasp4) but I'm pretty sure mine is Hasp HL Basic. Why would Hasp4 be mentioned in the log as well?
I've also read that I'm supposed to extract the pair tables from the .protect section of the exe. I've loaded it into Ollydbg but it doesn't contain a .protect section. So I have a Hasp HL Basic protected program with no envelope and based on the log file it just checks to see if the key is connected at startup. This should be easy to emulate but I just can't seem to make it work.
2008/11/26 17:53:39.900 Loger is loaded
2008/11/26 17:53:41.243 USB Loger is loaded
2008/11/26 17:53:41.243 Programm is started!
================================================== ================
2008/11/26 17:53:57.352 <== Application: Software.exe.exe
2008/11/26 17:53:57.352 <== InitPacket: Pass1 = 0x52BC (21180), Pass2 = 0x7F32 (32562)
2008/11/26 17:53:57.415 ==> InitPacket: Status = 0x00
================================================== ================
2008/11/26 17:53:57.477 <== Application: Software.exe.exe
2008/11/26 17:53:57.477 <== HaspGeneration: Pass1 = 0x52BC (21180), Pass2 = 0x7F32 (32562)
2008/11/26 17:53:57.540 ==> HaspGeneration: P1 = 0x01, P2 = 0x01, P3 = 0xEA
2008/11/26 17:53:57.540 ==> HaspGeneration - HASP HL is connected.
2008/11/26 17:53:57.540 ==> HaspGeneration: Status = 0x00
================================================== ================
2008/11/26 17:53:57.602 <== Application: Software.exe.exe
2008/11/26 17:53:57.602 <== HaspID: Pass1 = 0x52BC (21180), Pass2 = 0x7F32 (32562)
2008/11/26 17:53:57.665 ==> HaspID: ID = 0x0
2008/11/26 17:53:57.665 ==> HaspID: Status = 0x00
================================================== ================
2008/11/26 17:53:57.727 <== Application: Software.exe.exe
2008/11/26 17:53:57.727 <== HaspStatus: Pass1 = 0x52BC (21180), Pass2 = 0x7F32 (32562)
2008/11/26 17:53:57.727 ==> HaspStatus: Status = 0x00
2008/11/26 17:53:57.727 <== ReadBlock: Adress = 0x00, Length = 0x00 (WORD)
2008/11/26 17:53:57.790 ==> HaspStatus: P1 = 0x00, P2 = 0x00, P3 = 0x01
2008/11/26 17:53:57.790 ==> HaspStatus - HASP HL Basic
2008/11/26 17:53:57.790 ==> HaspStatus: Status = 0x00
2008/11/26 17:53:57.790 ==> ReadBlock: Data =
2008/11/26 17:53:57.790 ==> ReadBlock: Status = 0x00
================================================== ================
2008/11/26 17:53:57.852 <== Application: Software.exe.exe
2008/11/26 17:53:57.852 <== Hasp4_ID (Time): Pass1 = 0x52BC (21180), Pass2 = 0x7F32 (32562)
2008/11/26 17:53:57.915 ==> Hasp4_ID (Time): ID = 0x0
2008/11/26 17:53:57.915 ==> Hasp4_ID (Time): Status = 0x35
================================================== ================
2008/11/26 17:53:57.977 <== Application: Software.exe.exe
2008/11/26 17:53:57.977 <== HaspHL_decrypt: Pass1 = 0x52BC (21180), Pass2 = 0x7F32 (32562)
2008/11/26 17:53:57.977 <== HaspHL_decrypt: Length = 0x20
2008/11/26 17:53:57.977 <== HaspHL_decrypt: Input Data =
2008/11/26 17:53:57.977
79 D6 41 29 | C0 A1 AA 4D | 15 74 65 75 | 27 74 C4 F5 [y.A)...M.teu't..]
A5 88 5F C3 | 26 A8 69 D4 | 2E E9 39 F2 | 7C 5B 47 E6 [.._.&.i...9.|[G.]
2008/11/26 17:53:58.040 ==> HaspHL_decrypt: Output Data =
2008/11/26 17:53:58.040
77 1F 4E 37 | 6E 29 DB DE | 04 FF EE 36 | C0 D2 C1 25 [w.N7n).....6...%]
A5 88 5F C3 | 26 A8 69 D4 | 2E E9 39 F2 | 7C 5B 47 E6 [.._.&.i...9.|[G.]
2008/11/26 17:53:58.040 ==> HaspHL_decrypt: Status = 0x00
================================================== ================
2008/11/26 17:53:58.102 <== Application: Software.exe.exe
2008/11/26 17:53:58.102 <== HaspHL_decrypt: Pass1 = 0x52BC (21180), Pass2 = 0x7F32 (32562)
2008/11/26 17:53:58.102 <== HaspHL_decrypt: Length = 0x30
2008/11/26 17:53:58.102 <== HaspHL_decrypt: Input Data =
2008/11/26 17:53:58.102
79 D6 41 29 | C0 A1 AA 4D | 15 74 65 75 | 27 74 C4 F5 [y.A)...M.teu't..]
A5 88 5F C3 | 26 A8 69 D4 | 2E E9 39 F2 | 7C 5B 47 E6 [.._.&.i...9.|[G.]
9D 6B DE 0B | C8 A2 3C 36 | 7A 19 EF 76 | 8D 47 83 B8 [.k....<6z..v.G..]
2008/11/26 17:53:58.165 ==> HaspHL_decrypt: Output Data =
2008/11/26 17:53:58.165
54 68 69 73 | 20 69 73 20 | 74 68 65 20 | 58 2D 50 6C [This is the X-Pl]
A5 88 5F C3 | 26 A8 69 D4 | 2E E9 39 F2 | 7C 5B 47 E6 [.._.&.i...9.|[G.]
9D 6B DE 0B | C8 A2 3C 36 | 7A 19 EF 76 | 8D 47 83 B8 [.k....<6z..v.G..]
2008/11/26 17:53:58.165 ==> HaspHL_decrypt: Status = 0x00
================================================== ================
2008/11/26 17:53:58.227 <== Application: Software.exe.exe
2008/11/26 17:53:58.227 <== HaspHL_logout: Pass1 = 0x52BC (21180), Pass2 = 0x7F32 (32562)
2008/11/26 17:53:58.290 ==> HaspHL_logout: Status = 0x04
Prenumele Numele
11-26-2008, 05:46 PM
play long with your soft
Mario1234
11-28-2008, 03:25 AM
When I try to log my HASP HL dongle with hasplogger there is a lot of output when running the software. However, when I use Toro Monitor with the same software I only see some logging when I start the program and when I dump the dongle. When I work with the software Toro Monitor logs nothing. And when I install the usbfilter of Toro my computer doesn't start anymore.
Can I also use the log of hasplogger to crearte Q/A tables?
And I'm not sure if Toro Monitor works OK? Anyone else having the same problem installing the usbfilter?
Mario
souze_villy
11-28-2008, 04:26 AM
When I try to log my HASP HL dongle with hasplogger there is a lot of output when running the software. However, when I use Toro Monitor with the same software I only see some logging when I start the program and when I dump the dongle. When I work with the software Toro Monitor logs nothing. And when I install the usbfilter of Toro my computer doesn't start anymore.
Can I also use the log of hasplogger to crearte Q/A tables?
And I'm not sure if Toro Monitor works OK? Anyone else having the same problem installing the usbfilter?
Mario
Toro Monitor and Hasploger is same if you make log with hasploger easy then why you are using the toro monitor?
Ideally i would pay for this, but being a student i just dont have the kind of money some of you are asking, and ive already lost one dongle and had to pay for a second, so ideally i could get this working.
Could someone help me finish the last few steps of this, as i think i am close.
I have made my dump, converted to ref file with unidumper.I have run hasplpoger, and got the output file, and then ran some software on here to extract the Q and A, and have:
"QTable"=hex:\
0F,5C,D1,D6,1A,79,87,DF,93,74,9C,08,A4,BB,9B,D9,\
72,4F,F4,D9,DC,C9,61,0B,40,6D,69,C2,4F,D2,D1,09,\
00,F3,F2,2F,DD,DF,6C,57,E9,30,77,1F,9A,84,4F,E9,\
D2,67,1B,90,AD,1B,1A,E1,3B,08,80,B8,19,D0,7C,97,\
56,D9,3C,52,02,61,8B,80,6C,7A,67,DD,D6,2D,B1,3A,\
67,23,15,80,67,5B,30,C3,92,0B,A8,EB,95,41,B9,8C,\
11,1A,B3,5E,63,DE,E6,9B,07,93,1A,8F,3A,9D,BC,99,\
99,C1,E3,EE,DB,4D,EE,8F,00,D8,63,DA,BE,16,5C,89,\
D4,52,D7,DA,A7,D3,2A,7F,84,A4,7B,89,57,73,85,0D,\
37,00,C9,92,5B,24,ED,B6,7F,48,11,DA,A3,6C,35,FE,\
36,F8,9E,7C,41,65,9B,89,FD,FD,C2,C7,FF,A9,1F,1F,\
C3,A1,FC,36,28,25,95,7F,2E,55,70,B1,72,A9,AF,8A
"ATable"=hex:\
20,A0,FD,C3,96,A8,B2,98,50,B7,46,DA,83,E6,B9,86,\
68,53,7F,D3,8B,6F,3A,72,E1,B7,20,E9,B6,5B,C8,4C,\
5B,92,C8,73,03,1C,A5,5E,D0,5D,98,34,DC,32,23,28,\
76,9B,27,CE,17,92,DB,B3,E2,AB,9D,2F,F3,97,86,05,\
08,75,A2,68,E3,2E,00,48,4E,0F,31,8C,BD,4B,45,58,\
D4,56,0E,4F,8D,BD,06,7A,A0,16,69,74,A4,C6,95,65,\
80,5B,1B,BD,54,FC,37,A3,6D,A8,1B,3B,F6,60,6A,A6,\
BA,31,DE,48,54,B7,AC,A0,34,D5,4B,CE,D0,6E,71,53,\
4A,8B,68,1E,96,C5,69,DF,6B,B6,26,A8,82,97,91,CA,\
5A,D5,28,99,18,65,17,4C,22,23,E0,50,C0,9E,7B,1C,\
80,B9,67,1B,1B,92,D6,01,81,B3,EB,97,55,19,38,74,\
D0,06,3E,DF,05,7C,B1,4F,F1,8A,89,7E,FD,A0,3B,E8
I add this to the end of my regfile, and then run vusb, vusb installs dongle as new hardware, but i get an envelope error which by reading the threads has to do with the Q and A. Is it because i dont have the correct version of vusub(using 0.15), or am i missing a step.
Any help would be appreciated.
T.
amine76
12-04-2008, 03:59 AM
Ideally i would pay for this, but being a student i just dont have the kind of money some of you are asking, and ive already lost one dongle and had to pay for a second, so ideally i could get this working.
Could someone help me finish the last few steps of this, as i think i am close.
I have made my dump, converted to ref file with unidumper.I have run hasplpoger, and got the output file, and then ran some software on here to extract the Q and A, and have:
"QTable"=hex:\
0F,5C,D1,D6,1A,79,87,DF,93,74,9C,08,A4,BB,9B,D9,\
72,4F,F4,D9,DC,C9,61,0B,40,6D,69,C2,4F,D2,D1,09,\
00,F3,F2,2F,DD,DF,6C,57,E9,30,77,1F,9A,84,4F,E9,\
D2,67,1B,90,AD,1B,1A,E1,3B,08,80,B8,19,D0,7C,97,\
56,D9,3C,52,02,61,8B,80,6C,7A,67,DD,D6,2D,B1,3A,\
67,23,15,80,67,5B,30,C3,92,0B,A8,EB,95,41,B9,8C,\
11,1A,B3,5E,63,DE,E6,9B,07,93,1A,8F,3A,9D,BC,99,\
99,C1,E3,EE,DB,4D,EE,8F,00,D8,63,DA,BE,16,5C,89,\
D4,52,D7,DA,A7,D3,2A,7F,84,A4,7B,89,57,73,85,0D,\
37,00,C9,92,5B,24,ED,B6,7F,48,11,DA,A3,6C,35,FE,\
36,F8,9E,7C,41,65,9B,89,FD,FD,C2,C7,FF,A9,1F,1F,\
C3,A1,FC,36,28,25,95,7F,2E,55,70,B1,72,A9,AF,8A
"ATable"=hex:\
20,A0,FD,C3,96,A8,B2,98,50,B7,46,DA,83,E6,B9,86,\
68,53,7F,D3,8B,6F,3A,72,E1,B7,20,E9,B6,5B,C8,4C,\
5B,92,C8,73,03,1C,A5,5E,D0,5D,98,34,DC,32,23,28,\
76,9B,27,CE,17,92,DB,B3,E2,AB,9D,2F,F3,97,86,05,\
08,75,A2,68,E3,2E,00,48,4E,0F,31,8C,BD,4B,45,58,\
D4,56,0E,4F,8D,BD,06,7A,A0,16,69,74,A4,C6,95,65,\
80,5B,1B,BD,54,FC,37,A3,6D,A8,1B,3B,F6,60,6A,A6,\
BA,31,DE,48,54,B7,AC,A0,34,D5,4B,CE,D0,6E,71,53,\
4A,8B,68,1E,96,C5,69,DF,6B,B6,26,A8,82,97,91,CA,\
5A,D5,28,99,18,65,17,4C,22,23,E0,50,C0,9E,7B,1C,\
80,B9,67,1B,1B,92,D6,01,81,B3,EB,97,55,19,38,74,\
D0,06,3E,DF,05,7C,B1,4F,F1,8A,89,7E,FD,A0,3B,E8
I add this to the end of my regfile, and then run vusb, vusb installs dongle as new hardware, but i get an envelope error which by reading the threads has to do with the Q and A. Is it because i dont have the correct version of vusub(using 0.15), or am i missing a step.
Any help would be appreciated.
T.
Public emulator is not enough in this case :D
Ah well,
It was worth a try, i just need to live with the dongle, and try not to loose this one.
Thanks for the help anyway. I take it the non public one isnt available anywhere.
> Public emulator is not enough in this case
Why are you telling him that?. 0.15 will not do it, no, but there are emulators in this forum which will work fine on HL.
Git
Really,
Can someone point me in the right direction.
amine76
12-04-2008, 08:54 AM
> Public emulator is not enough in this case
Why are you telling him that?. 0.15 will not do it, no, but there are emulators in this forum which will work fine on HL.
Git
@Git
Really :D show us a link !!
Have you still not found how to use that Search button? ;)
http://www.reteam.org/board/showpost.php?p=8503&postcount=10
Git
This forum need some restriction unfortunately, it is fully with question "need emulator", not work" etc......
I would like from Admin to do somthing....
This forum need some restriction unfortunately, it is fully with question "need emulator", not work" etc......
I would like from Admin to do somthing....
Hi,
I am sorry if my posts where misplaced, i had just hoped someone could pass on some wisdom, which i would do if i had any in this area.
T.
amine76
12-04-2008, 03:45 PM
Have you still not found how to use that Search button? ;)
http://www.reteam.org/board/showpost.php?p=8503&postcount=10
Git
I know that but it will not help Trex in his case ;)
Assuming this ok to post, but is their a reason why this multi version is of no use to me, with my reg file etc.
As i mentioned earlier, ive created the reg file from the log, run hasploger, got some Q and A, i am assuming its not all of them, as their is only 12, and then run this program, which then installs the multi key.
However i get a hasp not found error, which i figure means its not picking up the emulator or reg file. However, strangely, when i ran vusbus version 15, the software gives an envelop error, so is obviously picking up the virtual usb element.
I am still trying to resolve it, but no luck as of yet. If anyone could point me in the right direction i would be olbiged, but equally i will understand if i am asking too many questions :)
T.
muzyk
12-19-2008, 05:01 AM
Hi,
I'm from Poland so first of all I would like to sorry for my english..:P
I have a problem with emulating my hasp hl dongle:/
I've tried almost evrything what I found in the internet. Ihave a |*.dmp file from HASPHL2008 (14 kbytes) and a *.bin file from the same program (9kb). When I want to solve dmp to dng by edgetool there is an error message "Wrong size of dump file" or something:/
On my key there is written "Aladdin.com".
My dongle is HASP HL 2.16 (when connect my key without drivers installed its found this one..) so I installed the latest driver I found (5.20) and nothing has changed. then I read that I must copy a hlvdd.dll to my system32 direcory so I did it. Now when I'm trying to dump I have an error 19 in HASPHL2008
The same with HASP HL2007.
Please help...some sugestions or advises:/
bloodlust026
12-19-2008, 09:00 AM
Jak się masz? Dzień dobry. Miło mi cię.
The edge tool is for HaspHL2007 not 2008. Thats probably why your getting the file size error. Also make sure you use the 'Hasp' tab and not the 'HaspHL' tab. The 'HL' in the 'HaspHL' tab stands for Hardlock, which is not what you have.
Error 19... i believe means it can't access the dongle or the passwords are incorrect. Make sure you have the original hasp drivers installed correctly and that the HaspHL2007 drivers are installed.
Search button helps too :-) (http://www.reteam.org/board/showthread.php?p=10490&highlight=error+19#post10490)
Thangdc
12-25-2008, 06:03 PM
this my dump file and log
dumfile convert to reg
REGEDIT4
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\NEWHAS P\Services\Emulator\HASP\Dump\17CA61A3]
"Name"=""
"Copyright"="Copyright (C) 2008 Haivan"
"Created"="24/12/2008 00:08:08"
"SN"=dword:00000000
"Type"=dword:000000EA
"Memory"=dword:00000000
"SecTable"=hex:8A,3B,27,37,E0,71,65,75
"NetMemory"=hex:00,00,00,00,00,00,00,00,00,00,00,00
"Option"=hex:00,01,02,4A,1F,01,17,0B,08,01,11,08,10,00
"Data"=hex:\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
"ColumnMask"=dword:0000002B
"CryptInitVect"=dword:00000033
Thangdc
12-25-2008, 06:10 PM
this link file log from hloger
http://rapidshare.de/files/41211616/NoName.log.html
when I make reg file and emuler by multi from gamebit have erro 1031 envelope unkow erro
and log file check i see
2008/12/25 22:58:18.953 Loger is loaded
2008/12/25 22:58:19.609 USB Loger is loaded
2008/12/25 22:58:19.609 Programm is started!
================================================== ================
2008/12/25 22:58:37.390 <== Application: MSEW(3.0).exe
2008/12/25 22:58:37.390 <== InitPacket: Pass1 = 0x17CA (6090), Pass2 = 0x61A3 (24995)
2008/12/25 22:58:37.453 ==> InitPacket: Status = 0x00
================================================== ================
2008/12/25 22:58:37.515 <== Application: MSEW(3.0).exe
2008/12/25 22:58:37.515 <== HaspGeneration: Pass1 = 0x17CA (6090), Pass2 = 0x61A3 (24995)
2008/12/25 22:58:37.578 ==> HaspGeneration: P1 = 0x01, P2 = 0x01, P3 = 0xEA
2008/12/25 22:58:37.578 ==> HaspGeneration - HASP4 is connected.
2008/12/25 22:58:37.578 ==> HaspGeneration: Status = 0x00
================================================== ================
2008/12/25 22:58:37.640 <== Application: MSEW(3.0).exe
2008/12/25 22:58:37.640 <== HaspID: Pass1 = 0x17CA (6090), Pass2 = 0x61A3 (24995)
2008/12/25 22:58:37.703 ==> HaspID: ID = 0x0
2008/12/25 22:58:37.703 ==> HaspID: Status = 0x00
================================================== ================
2008/12/25 22:58:37.765 <== Application: MSEW(3.0).exe
2008/12/25 22:58:37.765 <== HaspStatus: Pass1 = 0x17CA (6090), Pass2 = 0x61A3 (24995)
2008/12/25 22:58:37.828 ==> HaspStatus: P1 = 0x04, P2 = 0x01, P3 = 0x01
2008/12/25 22:58:37.828 ==> HaspStatus - HASP4 - M4
2008/12/25 22:58:37.828 ==> HaspStatus: Status = 0x00
================================================== ================
2008/12/25 22:58:37.890 <== Application: MSEW(3.0).exe
2008/12/25 22:58:37.890 <== Hasp4_ID (Time): Pass1 = 0x17CA (6090), Pass2 = 0x61A3 (24995)
2008/12/25 22:58:37.953 ==> Hasp4_ID (Time): ID = 0x10004
2008/12/25 22:58:37.953 ==> Hasp4_ID (Time): Status = 0x35
================================================== ================
2008/12/25 22:58:38.015 <== Application: MSEW(3.0).exe
2008/12/25 22:58:38.015 <== HaspHL_decrypt: Pass1 = 0x17CA (6090), Pass2 = 0x61A3 (24995)
2008/12/25 22:58:38.015 <== HaspHL_decrypt: Length = 0x10
2008/12/25 22:58:38.015 <== HaspHL_decrypt: Input Data =
2008/12/25 22:58:38.015
3A A2 A0 C8 | BA 75 E5 31 | C9 B3 64 B1 | 73 60 5F CA [:....u.1..d.s`_.]
2008/12/25 22:58:38.078 ==> HaspHL_decrypt: Output Data =
2008/12/25 22:58:38.078
DC 48 78 6A | AB 7F AF D4 | 2F FA 55 9B | EA 83 86 1F [.Hxj.../.U.....]
2008/12/25 22:58:38.078 ==> HaspHL_decrypt: Status = 0x00
================================================== ================
2008/12/25 22:58:38.140 <== Application: MSEW(3.0).exe
2008/12/25 22:58:38.140 <== HaspHL_decrypt: Pass1 = 0x17CA (6090), Pass2 = 0x61A3 (24995)
2008/12/25 22:58:38.140 <== HaspHL_decrypt: Length = 0x10
2008/12/25 22:58:38.140 <== HaspHL_decrypt: Input Data =
2008/12/25 22:58:38.140
E6 FB D5 29 | 22 E6 7B CB | 67 EB BC 1C | 04 BB B3 2C [...)".{.g......,]
2008/12/25 22:58:38.203 ==> HaspHL_decrypt: Output Data =
2008/12/25 22:58:38.203
3A A4 A3 1D | 06 A7 F7 7A | D5 64 C6 03 | 0B F6 DF C3 [:......z.d......]
2008/12/25 22:58:38.203 ==> HaspHL_decrypt: Status = 0x00
================================================== ================
2008/12/25 22:58:38.703 <== Application: MSEW(3.0).exe
2008/12/25 22:58:38.703 <== HaspHL_logout: Pass1 = 0x17CA (6090), Pass2 = 0x61A3 (24995)
2008/12/25 22:58:38.765 ==> HaspHL_logout: Status = 0x04
================================================== ================
2008/12/25 23:00:04.000 <== Application: MSEW(3.0).exe
2008/12/25 23:00:04.000 <== InitPacket: Pass1 = 0x17CA (6090), Pass2 = 0x61A3 (24995)
2008/12/25 23:00:04.062 ==> InitPacket: Status = 0x00
================================================== ================
2008/12/25 23:00:04.125 <== Application: MSEW(3.0).exe
2008/12/25 23:00:04.125 <== HaspGeneration: Pass1 = 0x17CA (6090), Pass2 = 0x61A3 (24995)
2008/12/25 23:00:04.187 ==> HaspGeneration: P1 = 0x01, P2 = 0x01, P3 = 0xEA
2008/12/25 23:00:04.187 ==> HaspGeneration - HASP4 is connected.
2008/12/25 23:00:04.187 ==> HaspGeneration: Status = 0x00
================================================== ================
2008/12/25 23:00:04.250 <== Application: MSEW(3.0).exe
2008/12/25 23:00:04.250 <== HaspID: Pass1 = 0x17CA (6090), Pass2 = 0x61A3 (24995)
2008/12/25 23:00:04.312 ==> HaspID: ID = 0x0
2008/12/25 23:00:04.312 ==> HaspID: Status = 0x00
================================================== ================
2008/12/25 23:00:04.375 <== Application: MSEW(3.0).exe
2008/12/25 23:00:04.375 <== HaspStatus: Pass1 = 0x17CA (6090), Pass2 = 0x61A3 (24995)
2008/12/25 23:00:04.437 ==> HaspStatus: P1 = 0x04, P2 = 0x01, P3 = 0x01
2008/12/25 23:00:04.437 ==> HaspStatus - HASP4 - M4
2008/12/25 23:00:04.437 ==> HaspStatus: Status = 0x00
================================================== ================
2008/12/25 23:00:04.500 <== Application: MSEW(3.0).exe
2008/12/25 23:00:04.500 <== Hasp4_ID (Time): Pass1 = 0x17CA (6090), Pass2 = 0x61A3 (24995)
2008/12/25 23:00:04.562 ==> Hasp4_ID (Time): ID = 0x100042008/12/25 23:00:04.562 ==> Hasp4_ID (Time): Status = 0x35
================================================== ================
2008/12/25 23:00:04.625 <== Application: MSEW(3.0).exe
2008/12/25 23:00:04.625 <== HaspHL_decrypt: Pass1 = 0x17CA (6090), Pass2 = 0x61A3 (24995)
2008/12/25 23:00:04.625 <== HaspHL_decrypt: Length = 0x10
2008/12/25 23:00:04.640 <== HaspHL_decrypt: Input Data =
2008/12/25 23:00:04.640
DA 04 FA 38 | 9D 79 09 E1 | CF 2A 80 13 | 30 2B 92 A0 [...8.y...*..0+..]
2008/12/25 23:00:04.687 ==> HaspHL_decrypt: Output Data =
2008/12/25 23:00:04.687
17 63 88 F8 | A0 15 99 46 | 0B BC EB F7 | B9 88 3A 75 [.c.....F......:u]
2008/12/25 23:00:04.687 ==> HaspHL_decrypt: Status = 0x00
hasp ID (time) is not corect please explain for me, you can see my reg file from link http://rapidshare.de/files/41211635/MSEW1.reg.html
smithjsmi
12-26-2008, 12:08 PM
this link file log from hloger
http://rapidshare.de/files/41211616/NoName.log.html
when I make reg file and emuler by multi from gamebit have erro 1031 envelope unkow erro
and log file check i see
2008/12/25 22:58:18.953 Loger is loaded
2008/12/25 22:58:19.609 USB Loger is loaded
2008/12/25 22:58:19.609 Programm is started!
================================================== ================
2008/12/25 22:58:37.390 <== Application: MSEW(3.0).exe
2008/12/25 22:58:37.390 <== InitPacket: Pass1 = 0x17CA (6090), Pass2 = 0x61A3 (24995)
2008/12/25 22:58:37.453 ==> InitPacket: Status = 0x00
================================================== ================
2008/12/25 22:58:37.515 <== Application: MSEW(3.0).exe
2008/12/25 22:58:37.515 <== HaspGeneration: Pass1 = 0x17CA (6090), Pass2 = 0x61A3 (24995)
2008/12/25 22:58:37.578 ==> HaspGeneration: P1 = 0x01, P2 = 0x01, P3 = 0xEA
2008/12/25 22:58:37.578 ==> HaspGeneration - HASP4 is connected.
2008/12/25 22:58:37.578 ==> HaspGeneration: Status = 0x00
================================================== ================
2008/12/25 22:58:37.640 <== Application: MSEW(3.0).exe
2008/12/25 22:58:37.640 <== HaspID: Pass1 = 0x17CA (6090), Pass2 = 0x61A3 (24995)
2008/12/25 22:58:37.703 ==> HaspID: ID = 0x0
2008/12/25 22:58:37.703 ==> HaspID: Status = 0x00
================================================== ================
2008/12/25 22:58:37.765 <== Application: MSEW(3.0).exe
2008/12/25 22:58:37.765 <== HaspStatus: Pass1 = 0x17CA (6090), Pass2 = 0x61A3 (24995)
2008/12/25 22:58:37.828 ==> HaspStatus: P1 = 0x04, P2 = 0x01, P3 = 0x01
2008/12/25 22:58:37.828 ==> HaspStatus - HASP4 - M4
2008/12/25 22:58:37.828 ==> HaspStatus: Status = 0x00
================================================== ================
2008/12/25 22:58:37.890 <== Application: MSEW(3.0).exe
2008/12/25 22:58:37.890 <== Hasp4_ID (Time): Pass1 = 0x17CA (6090), Pass2 = 0x61A3 (24995)
2008/12/25 22:58:37.953 ==> Hasp4_ID (Time): ID = 0x10004
2008/12/25 22:58:37.953 ==> Hasp4_ID (Time): Status = 0x35
================================================== ================
2008/12/25 22:58:38.015 <== Application: MSEW(3.0).exe
2008/12/25 22:58:38.015 <== HaspHL_decrypt: Pass1 = 0x17CA (6090), Pass2 = 0x61A3 (24995)
2008/12/25 22:58:38.015 <== HaspHL_decrypt: Length = 0x10
2008/12/25 22:58:38.015 <== HaspHL_decrypt: Input Data =
2008/12/25 22:58:38.015
3A A2 A0 C8 | BA 75 E5 31 | C9 B3 64 B1 | 73 60 5F CA [:....u.1..d.s`_.]
2008/12/25 22:58:38.078 ==> HaspHL_decrypt: Output Data =
2008/12/25 22:58:38.078
DC 48 78 6A | AB 7F AF D4 | 2F FA 55 9B | EA 83 86 1F [.Hxj.../.U.....]
2008/12/25 22:58:38.078 ==> HaspHL_decrypt: Status = 0x00
================================================== ================
2008/12/25 22:58:38.140 <== Application: MSEW(3.0).exe
2008/12/25 22:58:38.140 <== HaspHL_decrypt: Pass1 = 0x17CA (6090), Pass2 = 0x61A3 (24995)
2008/12/25 22:58:38.140 <== HaspHL_decrypt: Length = 0x10
2008/12/25 22:58:38.140 <== HaspHL_decrypt: Input Data =
2008/12/25 22:58:38.140
E6 FB D5 29 | 22 E6 7B CB | 67 EB BC 1C | 04 BB B3 2C [...)".{.g......,]
2008/12/25 22:58:38.203 ==> HaspHL_decrypt: Output Data =
2008/12/25 22:58:38.203
3A A4 A3 1D | 06 A7 F7 7A | D5 64 C6 03 | 0B F6 DF C3 [:......z.d......]
2008/12/25 22:58:38.203 ==> HaspHL_decrypt: Status = 0x00
================================================== ================
2008/12/25 22:58:38.703 <== Application: MSEW(3.0).exe
2008/12/25 22:58:38.703 <== HaspHL_logout: Pass1 = 0x17CA (6090), Pass2 = 0x61A3 (24995)
2008/12/25 22:58:38.765 ==> HaspHL_logout: Status = 0x04
================================================== ================
2008/12/25 23:00:04.000 <== Application: MSEW(3.0).exe
2008/12/25 23:00:04.000 <== InitPacket: Pass1 = 0x17CA (6090), Pass2 = 0x61A3 (24995)
2008/12/25 23:00:04.062 ==> InitPacket: Status = 0x00
================================================== ================
2008/12/25 23:00:04.125 <== Application: MSEW(3.0).exe
2008/12/25 23:00:04.125 <== HaspGeneration: Pass1 = 0x17CA (6090), Pass2 = 0x61A3 (24995)
2008/12/25 23:00:04.187 ==> HaspGeneration: P1 = 0x01, P2 = 0x01, P3 = 0xEA
2008/12/25 23:00:04.187 ==> HaspGeneration - HASP4 is connected.
2008/12/25 23:00:04.187 ==> HaspGeneration: Status = 0x00
================================================== ================
2008/12/25 23:00:04.250 <== Application: MSEW(3.0).exe
2008/12/25 23:00:04.250 <== HaspID: Pass1 = 0x17CA (6090), Pass2 = 0x61A3 (24995)
2008/12/25 23:00:04.312 ==> HaspID: ID = 0x0
2008/12/25 23:00:04.312 ==> HaspID: Status = 0x00
================================================== ================
2008/12/25 23:00:04.375 <== Application: MSEW(3.0).exe
2008/12/25 23:00:04.375 <== HaspStatus: Pass1 = 0x17CA (6090), Pass2 = 0x61A3 (24995)
2008/12/25 23:00:04.437 ==> HaspStatus: P1 = 0x04, P2 = 0x01, P3 = 0x01
2008/12/25 23:00:04.437 ==> HaspStatus - HASP4 - M4
2008/12/25 23:00:04.437 ==> HaspStatus: Status = 0x00
================================================== ================
2008/12/25 23:00:04.500 <== Application: MSEW(3.0).exe
2008/12/25 23:00:04.500 <== Hasp4_ID (Time): Pass1 = 0x17CA (6090), Pass2 = 0x61A3 (24995)
2008/12/25 23:00:04.562 ==> Hasp4_ID (Time): ID = 0x100042008/12/25 23:00:04.562 ==> Hasp4_ID (Time): Status = 0x35
================================================== ================
2008/12/25 23:00:04.625 <== Application: MSEW(3.0).exe
2008/12/25 23:00:04.625 <== HaspHL_decrypt: Pass1 = 0x17CA (6090), Pass2 = 0x61A3 (24995)
2008/12/25 23:00:04.625 <== HaspHL_decrypt: Length = 0x10
2008/12/25 23:00:04.640 <== HaspHL_decrypt: Input Data =
2008/12/25 23:00:04.640
DA 04 FA 38 | 9D 79 09 E1 | CF 2A 80 13 | 30 2B 92 A0 [...8.y...*..0+..]
2008/12/25 23:00:04.687 ==> HaspHL_decrypt: Output Data =
2008/12/25 23:00:04.687
17 63 88 F8 | A0 15 99 46 | 0B BC EB F7 | B9 88 3A 75 [.c.....F......:u]
2008/12/25 23:00:04.687 ==> HaspHL_decrypt: Status = 0x00
hasp ID (time) is not corect please explain for me, you can see my reg file from link http://rapidshare.de/files/41211635/MSEW1.reg.html
Hello Every one,
If any one need solution of (HaspHL all (Enc\Dec)) pairs I make it.
smithjsmi
12-26-2008, 12:11 PM
this link file log from hloger
http://rapidshare.de/files/41211616/NoName.log.html
when I make reg file and emuler by multi from gamebit have erro 1031 envelope unkow erro
and log file check i see
2008/12/25 22:58:18.953 Loger is loaded
2008/12/25 22:58:19.609 USB Loger is loaded
2008/12/25 22:58:19.609 Programm is started!
================================================== ================
2008/12/25 22:58:37.390 <== Application: MSEW(3.0).exe
2008/12/25 22:58:37.390 <== InitPacket: Pass1 = 0x17CA (6090), Pass2 = 0x61A3 (24995)
2008/12/25 22:58:37.453 ==> InitPacket: Status = 0x00
================================================== ================
2008/12/25 22:58:37.515 <== Application: MSEW(3.0).exe
2008/12/25 22:58:37.515 <== HaspGeneration: Pass1 = 0x17CA (6090), Pass2 = 0x61A3 (24995)
2008/12/25 22:58:37.578 ==> HaspGeneration: P1 = 0x01, P2 = 0x01, P3 = 0xEA
2008/12/25 22:58:37.578 ==> HaspGeneration - HASP4 is connected.
2008/12/25 22:58:37.578 ==> HaspGeneration: Status = 0x00
================================================== ================
2008/12/25 22:58:37.640 <== Application: MSEW(3.0).exe
2008/12/25 22:58:37.640 <== HaspID: Pass1 = 0x17CA (6090), Pass2 = 0x61A3 (24995)
2008/12/25 22:58:37.703 ==> HaspID: ID = 0x0
2008/12/25 22:58:37.703 ==> HaspID: Status = 0x00
================================================== ================
2008/12/25 22:58:37.765 <== Application: MSEW(3.0).exe
2008/12/25 22:58:37.765 <== HaspStatus: Pass1 = 0x17CA (6090), Pass2 = 0x61A3 (24995)
2008/12/25 22:58:37.828 ==> HaspStatus: P1 = 0x04, P2 = 0x01, P3 = 0x01
2008/12/25 22:58:37.828 ==> HaspStatus - HASP4 - M4
2008/12/25 22:58:37.828 ==> HaspStatus: Status = 0x00
================================================== ================
2008/12/25 22:58:37.890 <== Application: MSEW(3.0).exe
2008/12/25 22:58:37.890 <== Hasp4_ID (Time): Pass1 = 0x17CA (6090), Pass2 = 0x61A3 (24995)
2008/12/25 22:58:37.953 ==> Hasp4_ID (Time): ID = 0x10004
2008/12/25 22:58:37.953 ==> Hasp4_ID (Time): Status = 0x35
================================================== ================
2008/12/25 22:58:38.015 <== Application: MSEW(3.0).exe
2008/12/25 22:58:38.015 <== HaspHL_decrypt: Pass1 = 0x17CA (6090), Pass2 = 0x61A3 (24995)
2008/12/25 22:58:38.015 <== HaspHL_decrypt: Length = 0x10
2008/12/25 22:58:38.015 <== HaspHL_decrypt: Input Data =
2008/12/25 22:58:38.015
3A A2 A0 C8 | BA 75 E5 31 | C9 B3 64 B1 | 73 60 5F CA [:....u.1..d.s`_.]
2008/12/25 22:58:38.078 ==> HaspHL_decrypt: Output Data =
2008/12/25 22:58:38.078
DC 48 78 6A | AB 7F AF D4 | 2F FA 55 9B | EA 83 86 1F [.Hxj.../.U.....]
2008/12/25 22:58:38.078 ==> HaspHL_decrypt: Status = 0x00
================================================== ================
2008/12/25 22:58:38.140 <== Application: MSEW(3.0).exe
2008/12/25 22:58:38.140 <== HaspHL_decrypt: Pass1 = 0x17CA (6090), Pass2 = 0x61A3 (24995)
2008/12/25 22:58:38.140 <== HaspHL_decrypt: Length = 0x10
2008/12/25 22:58:38.140 <== HaspHL_decrypt: Input Data =
2008/12/25 22:58:38.140
E6 FB D5 29 | 22 E6 7B CB | 67 EB BC 1C | 04 BB B3 2C [...)".{.g......,]
2008/12/25 22:58:38.203 ==> HaspHL_decrypt: Output Data =
2008/12/25 22:58:38.203
3A A4 A3 1D | 06 A7 F7 7A | D5 64 C6 03 | 0B F6 DF C3 [:......z.d......]
2008/12/25 22:58:38.203 ==> HaspHL_decrypt: Status = 0x00
================================================== ================
2008/12/25 22:58:38.703 <== Application: MSEW(3.0).exe
2008/12/25 22:58:38.703 <== HaspHL_logout: Pass1 = 0x17CA (6090), Pass2 = 0x61A3 (24995)
2008/12/25 22:58:38.765 ==> HaspHL_logout: Status = 0x04
================================================== ================
2008/12/25 23:00:04.000 <== Application: MSEW(3.0).exe
2008/12/25 23:00:04.000 <== InitPacket: Pass1 = 0x17CA (6090), Pass2 = 0x61A3 (24995)
2008/12/25 23:00:04.062 ==> InitPacket: Status = 0x00
================================================== ================
2008/12/25 23:00:04.125 <== Application: MSEW(3.0).exe
2008/12/25 23:00:04.125 <== HaspGeneration: Pass1 = 0x17CA (6090), Pass2 = 0x61A3 (24995)
2008/12/25 23:00:04.187 ==> HaspGeneration: P1 = 0x01, P2 = 0x01, P3 = 0xEA
2008/12/25 23:00:04.187 ==> HaspGeneration - HASP4 is connected.
2008/12/25 23:00:04.187 ==> HaspGeneration: Status = 0x00
================================================== ================
2008/12/25 23:00:04.250 <== Application: MSEW(3.0).exe
2008/12/25 23:00:04.250 <== HaspID: Pass1 = 0x17CA (6090), Pass2 = 0x61A3 (24995)
2008/12/25 23:00:04.312 ==> HaspID: ID = 0x0
2008/12/25 23:00:04.312 ==> HaspID: Status = 0x00
================================================== ================
2008/12/25 23:00:04.375 <== Application: MSEW(3.0).exe
2008/12/25 23:00:04.375 <== HaspStatus: Pass1 = 0x17CA (6090), Pass2 = 0x61A3 (24995)
2008/12/25 23:00:04.437 ==> HaspStatus: P1 = 0x04, P2 = 0x01, P3 = 0x01
2008/12/25 23:00:04.437 ==> HaspStatus - HASP4 - M4
2008/12/25 23:00:04.437 ==> HaspStatus: Status = 0x00
================================================== ================
2008/12/25 23:00:04.500 <== Application: MSEW(3.0).exe
2008/12/25 23:00:04.500 <== Hasp4_ID (Time): Pass1 = 0x17CA (6090), Pass2 = 0x61A3 (24995)
2008/12/25 23:00:04.562 ==> Hasp4_ID (Time): ID = 0x100042008/12/25 23:00:04.562 ==> Hasp4_ID (Time): Status = 0x35
================================================== ================
2008/12/25 23:00:04.625 <== Application: MSEW(3.0).exe
2008/12/25 23:00:04.625 <== HaspHL_decrypt: Pass1 = 0x17CA (6090), Pass2 = 0x61A3 (24995)
2008/12/25 23:00:04.625 <== HaspHL_decrypt: Length = 0x10
2008/12/25 23:00:04.640 <== HaspHL_decrypt: Input Data =
2008/12/25 23:00:04.640
DA 04 FA 38 | 9D 79 09 E1 | CF 2A 80 13 | 30 2B 92 A0 [...8.y...*..0+..]
2008/12/25 23:00:04.687 ==> HaspHL_decrypt: Output Data =
2008/12/25 23:00:04.687
17 63 88 F8 | A0 15 99 46 | 0B BC EB F7 | B9 88 3A 75 [.c.....F......:u]
2008/12/25 23:00:04.687 ==> HaspHL_decrypt: Status = 0x00
hasp ID (time) is not corect please explain for me, you can see my reg file from link http://rapidshare.de/files/41211635/MSEW1.reg.html
Hello Every one,
If any one need solution of (HaspHL all (Hasp HL Basic, HaspHL Time etc) I make the solution of it, just contact with me. (Smithjsmi@gmail.com).
rooky2000
01-23-2009, 09:48 AM
Hello Every one,
If any one need solution of (HaspHL all (Hasp HL Basic, HaspHL Time etc) I make the solution of it, just contact with me. (Smithjsmi@gmail.com).
Just an AD for making money!
benito
01-23-2009, 11:12 AM
yeah, stop flooding here! mr "smith"
suresh dahal
02-23-2009, 03:52 AM
........
HEY !
I have also a problem. I have HASP HL USB Dongle. Recently I cracked a SW using Toro's Monitor & VUSB.The program now opens but after executing some menus & other commands it got crashed. So pls anyone can help me.
muzyk
03-02-2009, 07:38 AM
I Have a purple Hasp HL (pro?) and I have now a reg file...a read a lot and make a Q/A table from Toro's Hasp monitor...damn...since that I see everything in hex..i made it manually 'couse i don't know where to find Hasplogger or somethin what can do it for me. Then I made the QEnc/AEnc Table but I don't know if its correct:/ I use vusbbus and the aplication gove me an envelope error. I read about some .protect section with the debug process..but really i don't know what to do with that...If I open *.exe file in hexeditor f.e.
I can see this .protect section but what i have to do with it?
How to add this data to my reg file? how to do an Q/A Table from it? tell me what file will help you to help me:P Thanks..
PS. Can someone answare for qestion: If I will have an ATable and a QTable witch contains all possibilities numbers from 0 (32bit) to F (32bit max number) and paste it to my reg file then the application has no possibielities to not find an Answare in ATable? Am I wrong thinking?
speedyg
03-13-2009, 02:55 PM
Hi,
i have a little question about the tools to emulate hasp hl:
I downloaded "http://nodongle.biz/files/h5api.zip" to get h5dmp, and antivir keeps shouting that this file contains a trojan :TR/Crypt.XPACK.Gen
Did anyone get the same warning about this file ? can we trust this file ?
I tried also to scan it online with kaspersky, which found this file to be safe, without any threat. so i'm a bit confused, who's right, antivir, or kaspersky ?
thanks for any reply.
benito
03-13-2009, 03:07 PM
file is ok
dont worry, nodongle.biz is trustable site
speedyg
03-13-2009, 03:21 PM
ok, that's great. :)
thank you very much benito !
geotechnical_eng
03-20-2009, 07:20 AM
Dear Friends,
I have read all the information given by the masters and apprentices from the beginning of this topic.
I have a Hasp HL key and i used both h5dmp.exe and Tyrus's Hasp HL Dumper v 1.01 to get the dumps.
Then i converted them to .reg file by using Sataron's UniDMP2reg convertor and Tyrus's Hasp HL Dump Converter respectively.
There are no problems until this stage. Dumps seem similar. To get the questions and answers i used Toro hasp monitor (haspmon32 and monnew).
I got the Toro logs at different times. After i took a look at the questions and answers pairs which had been taken at different times,
i realized that they weren't identical. So the problem is i get different questions and answers pairs for the logs which are taken at
different times. My questions are below:
1- Can i use these pairs that were taken at different times, to form a Q/A table?
2- Shouldn't be the pairs identical for the Toro logs taken at different times?
3- What is the cause of different pairs which are taken different times? Is there an algorithm which changes the questions and answers
with time or is Toro log monitor's version i used incapable of getting questions and answers?
4- If i make Toro's log monitor to work longer, may i see the same answers and questions for different logs or does it really
give different logs at each start? What is the cause?
5- From the discussions i can understand that there must be 4 tables: Qtable, Atable, Qenctable and Aenctable. Can we see all
the informations related with these tables from the Toro's log? What is the difference with Qtable and Qenctable?
6- Does Chingachguk vusb emulator have the capacity to make it work if .reg file arranged correctly?
7- What do u recommend for us to use for both getting logs and emulating .reg file?
I will be very glad if masters give some suggestions and i think it will help the apprentices to clarify Hasp HL subject a bit.
Of course it is a very broad experience topic and for me, i only apply the instructions of masters. However nearly 1 year have passed until the beginning of this topic, but it is still unclarified to use Toro log and etc.
benito
03-20-2009, 08:54 AM
1) why not, but it have not be enough
2) no they neednt
3) random q/r
4) theoretically if there is radnom q/r not, practically it depend on implementation
5) not in all cases, it depend on function which impelmented develepor encode/decode
6) yes
7) read and use brain
BR
diden
03-21-2009, 10:37 AM
1) why not, but it have not be enough
2) no they neednt
3) random q/r
4) theoretically if there is radnom q/r not, practically it depend on implementation
5) not in all cases, it depend on function which impelmented develepor encode/decode
6) yes
7) read and use brain
BR
here is someone had to dump the key hasphl_time 512 bit (. dmp)
I followed the approach described here to add the reg file tables (atable, Qtable, Qenc Aenc)
The problem with the emulator not work I know there is something missing.
I would like an explanation of such key please
shadowilliams
03-27-2009, 08:45 AM
HELP!:eek:
I followed several times the steps explained by master Fejkus trying to find a Hasp hl soultion but i don't seem to solve my problem.
Arriving at step 10 i have a problem with the recognition of one usb driver.
http://rapidshare.com/files/215310015/Akd.rar.html
1) Hasp hl table based emulator with my reg file (akd_install.exe compressed file)
2) Two log i've tried for Q/A table
3) Print screen with hasp hl error.
Thanks,
:)
clive
04-01-2009, 10:38 AM
Hi
I have a Time HASP HL 3.21.
I tried dumping it with h4dmp.exe & see the result below.
.
.
.
01.04.2009 03:32:34 Current MODAD = 7FBCh (32700).
01.04.2009 03:33:15 Current MODAD = 7FF8h (32760).
01.04.2009 03:33:20 Bruteforcing is done. But we did not found MODAD to open your dongle!
Also if I try HaspHL EMu 2006, 2007, 2008, I get a message - Failed to Load S/W Keylock module.
EVen HaspEmuPE with Glasha gives teh same message.
I alos tried Toro Monitor as explained on FOrum. Howeevr with Toro also, the program doesn't start but I don't get the S/W Keylock error message
So pl advise what to do
Thanks
fejkus
04-01-2009, 03:02 PM
Are you sure, you have installed original hasp drivers first?
(install original drivers and then install emulator)
i tried your idea.reg and it works, but i realized, you have different q/a pairs in toro log file and in the reg file.
May be, your program generates random query.
Regards
HELP!:eek:
I followed several times the steps explained by master Fejkus trying to find a Hasp hl soultion but i don't seem to solve my problem.
Arriving at step 10 i have a problem with the recognition of one usb driver.
http://rapidshare.com/files/215310015/Akd.rar.html
1) Hasp hl table based emulator with my reg file (akd_install.exe compressed file)
2) Two log i've tried for Q/A table
3) Print screen with hasp hl error.
Thanks,
:)
ff2000
04-07-2009, 08:54 AM
I made a dump with h5dmp.exe. I get a hasp.dmp and a hhl_mem.dmp.
Then with unidumptoreg.exe i get a reg file (vUSB Hasp HL).
Everthing looks fine.
But then i need to find the Q/A Tables.
I tried toromonitor en the Q/A section is blank nothing is happening. Can anyone help what to do?
xiaoduirensheng
04-07-2009, 09:41 AM
It's very good
unforgiven
04-07-2009, 03:32 PM
I made a dump with h5dmp.exe. I get a hasp.dmp and a hhl_mem.dmp.
Then with unidumptoreg.exe i get a reg file (vUSB Hasp HL).
Everthing looks fine.
But then i need to find the Q/A Tables.
I tried toromonitor en the Q/A section is blank nothing is happening. Can anyone help what to do?
Try to catch Q/A with bustrace or another Usb Tracer prog if you have prob with toro monitor.
vBulletin® v3.6.4, Copyright ©2000-2009, Jelsoft Enterprises Ltd.