
                     Quick and Dirty install of ds14xxe.o

- Before installing this driver make sure you have a backup of the current
  kernel. (/stand/vmunix) 

- Changes have been made to the install procedure for HPUX 10.x
  1. The old /etc/master has moved to /etc/conf/master.d/core-hpux
  2. The old /etc/conf/dfile has moved to /stand/system

0.  Make sure ds14xxe.o, and dowadd are in /ds14xxe.

1.  Switch to single user mode (you must be super user).

2.  Make backup copies of /stand/system and /etc/conf/master.d/core-hpux.

3.  The line in dowmast must be inserted in /etc/conf/master.d/core-hpux. 
    This line assumes that major number 40 is available. If not,
    change the major number to one that is available and edit]
    the mknod line of the dowadd script accordingly.

4.  Add dow0 to /stand/system.

5.  Change directory to /ds14xxe

6.  Run dowadd.

7.  Halt the system.

8.  Turn off power and install the DS1410E(s), and/or DS1405E(s).

9.  Restart the system and run scratch to test the installation.

