WinPatch v1.2 (c) 1996-1998 King Artistry, Inc.
http://www.artistry.com

WinPatch is used to build or apply a patch file. Patch files greatly simplify
the task of providing program updates to your users.  Patch files contain 
only the changes made from one set of files to another.  Therefore, user 
updates can be distributed at a fraction of the cost of re-distributing the 
entire set of files.  Typically patch files are 3 to 7 percent of the size of
the entire set of files.

 1) Run WINPATCH.EXE and an "OPENiNG SCREEN" or a "NAG SCREEN" will appear.

 2) Click on the "CONTiNUE", "AGREE", "ABOUT", and "REGiSTER" button and enter
    the following:- 

   Name: mISTER fANATIC
   Registration ID: L&D-0611-11223344
   Organization: cRACKiNG 4 aLL

 3) Press "CTRL-D" to return into SoftIce, type "bpx getwindowtexta", and
    press "CRTL-D" to return into WinPatch. Finally, click on the "OK" button
    to register and you are back to SoftIce.

 4) DO NOT press "F11" or "F12". 

 5) Then, type "e eax" and you will see "mISTER fANATIC" in the Data Window. 

 6) DO NOT press "F11" or "F12". 

 7) Press "F5", type "e eax" and you will see "L&D-0611-11223344" in the Data
    Window. 

 8) DO NOT press "F11" or "F12".

 9) Press "F5" again, type "e eax" and you will see "cRACKiNG 4 aLL" in the
    Data Window. 

10) DO NOT press "F11" or "F12". 

11) Now, press ALT and DOWN ARROW KEY to browse the Data Window and you will
    see something like "L&D-0611-31540900" in the Data Window.

12) Press "CTRL-D" to return to WinPatch. Enter the following:-

    Name: mISTER fANATIC
    Registration ID: L&D-0611-31540900
    Organization: cRACKiNG 4 aLL

    BOOM, its registered!!!

13) If you CANNOT find the Registration ID, close the program (WINPATCH.EXE)
    and try redo from the start.

Well, I hope you learned something from this tutorial.
mailto: mr_fanatic@iname.com or c4a@iname.com