ALL Transcender Products Generic kEYMAKER bY SiraX/CORE, March 1, 1999

NOTE:  Not too long after the last generic keymaker was released, something
       had changed in the exe files which caused that keymaker to fail.  So
       here is the update.  This generic keymaker should work for files
       dated Feb 24 and before.  It may work for future updates also.  But
       don't count on it.  To use the keymaker, following the steps below:

1.  Install your transcender program.
2.  Run the keygen from a CONSOLE window(a dos-prompt box, not from explorer).
3.  [Usage]:   LOADTRAN TRANSCENDER_EXECUTABLE.EXE
    eg.  <loadtran nt4cert.exe> assuming loader is in the same dir as your
    ENTERPRISE v4.0a CERT executable
    Note:  RUN loadtran ON THE TRANSCENDER EXE AFTER INSTALLATION, NOT THE
    4 MEG INSTALLATION FILE ITSELF.
4.  After the exe is loaded, you'll be prompted to enter your SYS ID.  Get
    your SYS ID from the running exe file by choosing Enable Full Version.
5.  Then enter your SYS ID(on right side of reg dialog) into the keymaker
    to get your registration code.

FILE URL:   ftp.transcender.com/ftp/

GREETINGS:  DrRhui, Vizion, Hambo, Egis, pSI, Attitude, escom, Kate, the rest
            of my CORE CREW, and all the HARDCORE fans out there :)

